Evaluation of net-zero energy residential buildings in the MENA region

Abstract This paper outlines the approach and the cost-effectiveness potential for designing net-zero energy residential buildings in the Middle East and North Africa (MENA) region. Specifically, a sequential search technique is utilized to optimize the design of residential buildings in several locations within the MENA region in order to minimize life cycle energy costs using a wide range of energy efficiency measures. In the analysis, design features of air-conditioned single-family homes are considered including orientation, window location and size, glazing type, wall and roof insulation levels, lighting fixtures, appliances, and efficiencies of heating and cooling systems. First, optimal design features for net-zero energy single-family homes are determined for over 160 MENA locations. In particular, the potential energy use savings obtained for the optimal designs as well as the size of the photovoltaic panels required for net-zero energy residential building designs are estimated for the MENA sites. The impacts of both energy cost subsidies and cost variations for implementing energy efficiency measures are evaluated for selected MENA countries. In particular, it is found that optimal designs can cost-effectively reduce the annual energy use typically by 50% compared to the current design practices of homes through most countries in the MENA region. However, the cost-effectiveness of these optimal designs is found to be highly dependent on the level for energy prices and the implementation costs of energy efficiency measures. The sensitivity analysis results clearly show that the best policy to promote energy-efficient and net-zero energy buildings is to reduce and ultimately eliminate energy subsidies in the MENA region.

[1]  Weimin Wang,et al.  Applying multi-objective genetic algorithms in green building design optimization , 2005 .

[2]  Moncef Krarti,et al.  Evaluation of large scale building energy efficiency retrofit program in Kuwait , 2015 .

[3]  F. Al-Ragom.  Retrofitting residential buildings in hot and arid climates , 2003 .

[4]  Moncef Krarti,et al.  Optimization of energy efficiency and thermal comfort measures for residential buildings in Salamanca, Mexico , 2012 .

[5]  P. Torcellini,et al.  Zero Energy Buildings: A Critical Look at the Definition; Preprint , 2006 .

[6]  Moncef Krarti,et al.  Energy Audit of Building Systems : An Engineering Approach , 2000 .

[7]  N. W. Alnaser,et al.  Building integrated renewable energy to achieve zero emission in Bahrain , 2015 .

[8]  Essia Znouda,et al.  Optimization of Mediterranean building design using genetic algorithms , 2007 .

[9]  S. A. Al-Sanea,et al.  Improving thermal performance of building walls by optimizing insulation layer distribution and thickness for same thermal mass , 2011 .

[10]  Naouel Daouas,et al.  A study on optimum insulation thickness in walls and energy savings in Tunisian buildings based on analytical calculation of cooling and heating transmission loads , 2011 .

[11]  Moncef Krarti,et al.  Optimization of envelope and HVAC systems selection for residential buildings , 2011 .

[12]  Omar Khattab,et al.  Occupants’ behavior and activity patterns influencing the energy consumption in the Kuwaiti residences , 2003 .

[13]  David Allinson,et al.  Hygrothermal analysis of a stabilised rammed earth test building in the UK , 2010 .

[14]  Muhammad Asif,et al.  Growth and sustainability trends in the buildings sector in the GCC region with particular reference to the KSA and UAE , 2016 .

[15]  S. A. Al-Sanea,et al.  Effect of thermal mass on performance of insulated building walls and the concept of energy savings potential , 2012 .

[16]  Moncef Krarti,et al.  Optimal design of residential building envelope systems in the Kingdom of Saudi Arabia , 2015 .

[17]  Leslie K. Norford,et al.  Genetic Algorithms for Optimization of Building Envelopes and the Design and Control of HVAC Systems , 2003 .

[18]  Samar Jaber,et al.  Optimum, technical and energy efficiency design of residential building in Mediterranean region , 2011 .

[19]  Vítor Leal,et al.  A methodology for economic efficient design of Net Zero Energy Buildings , 2012 .

[20]  Moncef Krarti,et al.  Design optimization of energy efficient residential buildings in Tunisia , 2012 .

[21]  Svend Svendsen,et al.  Method for component-based economical optimisation for use in design of new low-energy buildings , 2012 .

[22]  Moncef Krarti,et al.  Genetic-algorithm based approach to optimize building envelope design for residential buildings , 2010 .

[23]  Hassan Radhi,et al.  A systematic methodology for optimising the energy performance of buildings in Bahrain , 2008 .

[24]  Karsten Voss,et al.  Net zero energy buildings: A consistent definition framework , 2012 .

[25]  Ayyoob Sharifi,et al.  A critical review of seven selected neighborhood sustainability assessment tools , 2013 .

[26]  Paul Kenny,et al.  From net energy to zero energy buildings: Defining life cycle zero energy buildings (LC-ZEB) , 2010 .