Multiphase Electric Machines for

[1]  S. Mantero,et al.  DC-bus voltage control for double star asynchronous fed drive under fault conditions , 2000, 2000 IEEE 31st Annual Power Electronics Specialists Conference. Conference Proceedings (Cat. No.00CH37018).

[2]  J.S. Edelson,et al.  The Chorus Meshcon Solution for Starter-Generators , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[3]  Hamid A. Toliyat,et al.  A DSP-based vector control of five-phase synchronous reluctance motor , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[4]  P. Sangha,et al.  The design of fault tolerant machines for aerospace applications , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[5]  Xavier Kestelyn,et al.  Investigation on Multi-star Structures for Large Power Direct-drive Wind Generator , 2007 .

[6]  Alain Bouscayrol,et al.  Vectorial formalism for analysis and design of polyphase synchronous machines , 2003 .

[7]  Martin Jones,et al.  Even-phase multi-motor vector controlled drive with single inverter supply and series connection of stator windings , 2003 .

[8]  Slobodan N. Vukosavic,et al.  Generalised Sinusoidal PWM with Harmonic Injection for Multi-Phase VSIs , 2006 .

[9]  N. Hoshi,et al.  A low-cost system of variable-speed cascaded induction generators for small-scale hydroelectricity , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[10]  E. G. Strangas,et al.  Multiphase Space Vector Pulse Width Modulation , 2002, IEEE Power Engineering Review.

[11]  Alberto Tenconi,et al.  Complete analysis and comparative study of digital modulation techniques for dual three-phase AC motor drives , 2002, 2002 IEEE 33rd Annual IEEE Power Electronics Specialists Conference. Proceedings (Cat. No.02CH37289).

[12]  Girish Kumar Singh,et al.  A simple indirect field-oriented control scheme for multiphase induction machine , 2005, IEEE Transactions on Industrial Electronics.

[13]  D. White,et al.  Electromechanical energy conversion , 1959 .

[14]  Alberto Tenconi,et al.  Direct Torque Control with Full Order Stator Flux Observer for Dual-Three Phase Induction Motor Drives , 2006 .

[15]  Thomas A. Lipo,et al.  Analysis of a concentrated winding induction machine for adjustable speed drive applications. I. Motor analysis , 1991 .

[16]  Elias G. Strangas,et al.  Multi-phase inverter analysis , 2001, IEMDC 2001. IEEE International Electric Machines and Drives Conference (Cat. No.01EX485).

[17]  G. Joos,et al.  Space vector PWM control of a split-phase induction machine using the vector classification technique , 1998, APEC '98 Thirteenth Annual Applied Power Electronics Conference and Exposition.

[18]  F. Meibody-Tabar,et al.  Multiple-phase permanent magnet synchronous machine supplied by VSIs, working under fault conditions , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[19]  M.J. Kamper,et al.  Novel Direct Field and Direct Torque Control of Six-Phase Induction Machine with Special Phase Current Waveform , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[20]  Hamid A. Toliyat,et al.  A novel direct torque control (DTC) method for five-phase induction machines , 2000, APEC 2000. Fifteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.00CH37058).

[21]  Hamid A. Toliyat,et al.  Five-phase induction motor drives with DSP-based control system , 2002 .

[22]  A. von Jouanne,et al.  A dual-bridge inverter approach to eliminating common mode voltages and bearing and leakage currents , 1997, PESC97. Record 28th Annual IEEE Power Electronics Specialists Conference. Formerly Power Conditioning Specialists Conference 1970-71. Power Processing and Electronic Specialists Conference 1972.

[23]  Martin Jones,et al.  A Five-Phase Two-Machine Vector Controlled Induction Moto Drive Supplied from a Single Inverter , 2004 .

[24]  R. Parimelalagan,et al.  Studies on inverter-fed five-phase induction motor drive , 1988 .

[25]  Y. Zhao,et al.  Modeling and control of a multi-phase induction machine with structural unbalance , 1996 .

[26]  H.A. Toliyat,et al.  Dynamics of a series-connected two-motor five-phase drive system with a single-inverter supply , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[27]  Alberto Tenconi,et al.  Dual three-phase induction motor drive with digital current control in the stationary reference frame , 1989 .

[28]  K Gopakumar,et al.  A Novel Split Phase Induction Motor Drive without Harmonic Filters and with Linear Voltage Control for the Full Modulation Range , 2006 .

[29]  E. A. Klingshirn,et al.  High Phase Order Induction Motors - Part I. Description and Theoretical Considerations , 1983, IEEE Power Engineering Review.

[30]  Xuhui Wen,et al.  Simulation analysis of two novel multiphase SVPWM strategies , 2005, 2005 IEEE International Conference on Industrial Technology.

[31]  E. Levi,et al.  Multi-Dimensional Approach to Multi-Phase Space Vector Pulse Width Modulation , 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.

[32]  H.A. Toliyat,et al.  Fault-tolerant five-phase permanent magnet motor drives , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[33]  Zhiqiao Wu,et al.  Pulse-Width Modulation for Five-Phase Converters Based on Device Turn-on Times , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[34]  H. Stemmler,et al.  A New Transformerless Topology for AC-Fed Traction Vehicles Using Multi-Star Induction Motors , 2000 .

[35]  Franck Betin,et al.  Aspects of current regulation in indirect field oriented control of dual three phase induction machines , 2006, 2006 IEEE International Conference on Industrial Technology.

[36]  C.E. Coates,et al.  Performance evaluation of a nine-phase synchronous reluctance drive , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[37]  K. T. Chau,et al.  A novel polyphase multipole square-wave permanent magnet motor drive for electric vehicles , 1994 .

[38]  R. Kianinezhad,et al.  A new sensorless field-oriented control for Six-Phase Induction Machines , 2008, 2008 International Symposium on Power Electronics, Electrical Drives, Automation and Motion.

[39]  H.A. Toliyat,et al.  Induction Machine/Syn-Rel Two-Motor Five-Phase Series-Connected Drive , 2007, IEEE Transactions on Energy Conversion.

[40]  Lin Hua,et al.  The Vector Control Strategies for Multiphase Synchronous Motor Drive Systems , 2006, 2006 IEEE International Symposium on Industrial Electronics.

[41]  John E. Fletcher,et al.  Development of space vector modulation strategies for five phase voltage source inverters , 2004 .

[42]  H.A. Toliyat,et al.  Field oriented control of five-phase synchronous reluctance motor drive with flexible 3/sup rd/ harmonic current injection for high specific torque , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[43]  Xuhui Wen,et al.  A Novel Multi-Dimensional SVPWM Strategy of Multiphase Motor Drives , 2006, 2006 12th International Power Electronics and Motion Control Conference.

[44]  P. Viarouge,et al.  Polyphase PM Brushless DC Motor for High Reliability Application , 2004 .

[45]  Sujit K. Biswas,et al.  Modified current source inverter fed induction motor drive with reduced torque pulsations , 1984 .

[46]  L.F.A. Pereira,et al.  General Model of a Five-Phase Induction Machine Allowing for Harmonics in the Air Gap Field , 2006, IEEE Transactions on Energy Conversion.

[47]  A. Tenconi,et al.  Efficiency Analysis of PWM Inverter Fed Three-Phase and Dual Three-Phase Induction Machines , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[48]  G.A. Capolino,et al.  Torque Ripples Suppression for Six-Phase Induction Motors Under Open Phase Faults , 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.

[49]  S. Williamson,et al.  Analysis of multi-phase induction machines with winding faults , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[50]  V. Oleschuk,et al.  Multifunctional Six-Phase Motor Drives with Algorithms of Synchronized PWM , 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.

[51]  R. F. Schiferl,et al.  Six-Phase Synchronous Machine with ac and dc Stator Connections, Part II: Harmonic Studies and a Proposed Uninterruptible Power Supply Scheme , 1983, IEEE Power Engineering Review.

[52]  P. Sangha,et al.  The Analysis of Losses in High-Power Fault-Tolerant Machines for Aerospace Applications , 2006, IEEE Transactions on Industry Applications.

[53]  K. Gopakumar,et al.  A novel modulation scheme for a six phase induction motor with open-end windings , 2002, IEEE 2002 28th Annual Conference of the Industrial Electronics Society. IECON 02.

[54]  A. Tenconi,et al.  Digital field oriented control for dual three-phase induction motor drives , 2002 .

[55]  F. Blaabjerg,et al.  Controlling the DC-link midpoint potential in a six-phase motor-drive , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[56]  É. Semail,et al.  Design and study of a multiphase axial-flux machine , 2006, IEEE Transactions on Magnetics.

[57]  S. Williamson,et al.  Induction motor performance as a function of phase number , 2006 .

[58]  M.T. Abolhassani,et al.  A novel multiphase fault tolerant high torque density permanent magnet motor drive for traction application , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[59]  Kais Atallah,et al.  Optimal torque control of fault-tolerant permanent magnet brushless machines , 2003 .

[60]  Shuai Lu,et al.  Multilevel multi-phase propulsion drives , 2005, IEEE Electric Ship Technologies Symposium, 2005..

[61]  X. Kestelyn,et al.  Optimum use of DC bus by fitting the back-electromotive force of a 7-phase permanent magnet synchronous machine , 2005, 2005 European Conference on Power Electronics and Applications.

[62]  Seung-Ki Sul,et al.  Synchronous frame current control of multi-phase synchronous motor. Part I. Modeling and current control based on multiple d-q spaces concept under balanced condition , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[63]  Hamid A. Toliyat,et al.  Development of low cost multi-phase brushless DC (BLDC) motors with unipolar current excitations , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[64]  T.A. Lipo,et al.  Torque density improvement in a six-phase induction motor with third harmonic current injection , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[65]  Y. Zhao,et al.  Modeling and control of a multi-phase induction machine with structural unbalance part II. Field-oriented control and experimental verification , 1996 .

[66]  Girish Kumar Singh,et al.  Multi-phase induction machine drive research—a survey , 2002 .

[67]  S. Brisset,et al.  Design and Optimization of a Nine-Phase Axial-Flux PM Synchronous Generator With Concentrated Winding for Direct-Drive Wind Turbine , 2006, IEEE Transactions on Industry Applications.

[68]  K. Hatua,et al.  Direct torque control schemes for split-phase induction machine , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[69]  Yifan Zhao,et al.  Space vector PWM control of dual three phase induction machine using vector space decomposition , 1994 .

[70]  A. Tessarolo,et al.  A novel modeling approach to a multi-phase, high power synchronous machine , 2006, International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006..

[71]  Hamid A. Toliyat,et al.  Multiphase induction motor drives - : a technology status review , 2007 .

[72]  G.A. Capolino,et al.  Decoupling Modeling and Control of Six-Phase Induction Machines Under Open Phase Fault Conditions , 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.

[73]  J.M. Miller,et al.  Design considerations for an automotive integrated starter-generator with pole-phase modulation , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[74]  M. Jones,et al.  Independent Control of Two Five-Phase Induction Machines Connected in Parallel to a Single Inverter Supply , 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.

[75]  M.G. Simoes,et al.  Design and evaluation of a polyphase brushless DC-machine direct drive system , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[76]  Thomas A. Lipo,et al.  Analysis and modeling of five phase converters for adjustable speed drive applications , 2002 .

[77]  Fei Yu,et al.  Research on PWM techniques of five-phase three-level inverter , 2006, International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006..

[78]  L.F.A. Pereira,et al.  Model of a five-phase induction machine allowing for harmonics in the air-gap field. Part I. Parameter determination and general equations , 2004, 30th Annual Conference of IEEE Industrial Electronics Society, 2004. IECON 2004.

[79]  Edson H. Watanabe,et al.  Dynamic Control of a Current-Source Inverter/ Double-Wound Synchronous Machine System for AC Power Supply , 1981 .

[80]  Aja André Vandenput,et al.  Minimising rotor losses in high-speed high-power permanent magnet synchronous generators with rectifier load , 1997 .

[81]  Lin Chen,et al.  DSP-based indirect rotor field oriented control for multiphase induction machines , 2003, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03..

[82]  Jean-Paul Hautier,et al.  Multi-Phase System Supplied by Svm Vsi: A New Fast Algorithm to Compute Duty Cycles , 2004 .

[83]  C.B. Jacobina,et al.  Fault tolerant control of five-phase AC motor drive , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[84]  E. Ward,et al.  Preliminary investigation of an invertor-fed 5-phase induction motor , 1969 .

[85]  Kais Atallah,et al.  Effect of optimal torque control on rotor loss of fault tolerant permanent magnet brushless machines , 2002 .

[86]  Franck Betin,et al.  A novel Direct Torque Control (DTC) method for dual three phase induction motors , 2006, 2006 IEEE International Conference on Industrial Technology.

[87]  G. K. Singh, Vinay Pant,et al.  Analysis of a Multiphase Induction Machine Under Fault Condition in a Phase-Redundant A.C. Drive System , 2000 .

[88]  H.A. Toliyat,et al.  Steady-State Modeling of Series-Connected Five-Phase and Six-Phase Two-Motor Drives , 2008, IEEE Transactions on Industry Applications.

[89]  H. Razik,et al.  A Model of Dual Stator Winding Induction Machine in case of Stator and Rotor Faults for Diagnosis Purpose , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[90]  T.A. Lipo,et al.  A five phase reluctance motor, with high specific torque , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[91]  G. Griva,et al.  Vector control of dual-three phase induction motor drives using two current sensors , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[92]  Pekik Argo Dahono.  Analysis and Minimization of Output Current Ripple of Multiphase PWM Inverters , 2006 .

[93]  V.T. Ranganathan,et al.  Split phase induction motor operation from PWM voltage source inverter , 1991, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting.

[94]  G. Griva,et al.  Direct torque control for dual-three phase induction motor drives , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[95]  Slobodan N. Vukosavic,et al.  Rotor flux oriented control of a symmetrical six-phase induction machine , 2005 .

[96]  T. Lubin,et al.  A model of double star induction motors under rotor bar defect for diagnosis purpose , 2005, 2005 IEEE International Conference on Industrial Technology.

[97]  S. Smith.  Developments in power electronics, machines and drives , 2002 .

[98]  M. Jones,et al.  A PWM Scheme for a Five-Phase VSI Supplying a Five-Phase Two-Motor Drive , 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.

[99]  Jeffrey H. Lang,et al.  A six-phase multilevel inverter for MEMS electrostatic induction micromotors , 2004, IEEE Transactions on Circuits and Systems II: Express Briefs.

[100]  John James Anthony Cullen,et al.  Favourable slot and pole number combinations for fault-tolerant PM machines , 2004 .

[101]  H. Toliyat,et al.  Five-phase permanent-magnet motor drives , 2005, IEEE Transactions on Industry Applications.

[102]  C. Ong,et al.  Six Phase Synchronous Machine with AC and DC Stator Connections, Part I: Equivalent Circuit Representation and Steady-State Analysis , 1983, IEEE Transactions on Power Apparatus and Systems.

[103]  Martin Jones,et al.  Vector control schemes for series-connected six-phase two-motor drive systems , 2005 .

[104]  Franck Scuiller,et al.  Comparizon of Conventional and Unconventional 5-phase PM Motor Structures for Naval Applications , 2004 .

[105]  Alberto Tenconi,et al.  Dual-Three Phase Induction Machine Drives Control—A Survey , 2006 .

[106]  Seung-Ki Sul,et al.  Analysis of multiphase space vector pulse width modulation based on multiple d-q spaces concept , 2005, The 4th International Power Electronics and Motion Control Conference, 2004. IPEMC 2004..

[107]  B.C. Mecrow,et al.  Design and testing of a four-phase fault-tolerant permanent-magnet machine for an engine fuel pump , 2004, IEEE Transactions on Energy Conversion.

[108]  M. Jones,et al.  A series-connected two-motor six-phase drive with induction and permanent magnet machines , 2006, IEEE Transactions on Energy Conversion.

[109]  E. F. Fuchs,et al.  Analysis of an Alternator with Two Displaced Stator Windings , 1974 .

[110]  Hamid A. Toliyat,et al.  Resilient current control of five-phase induction motor under asymmetrical fault conditions , 2002, APEC. Seventeenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.02CH37335).

[111]  A. Monti,et al.  Optimizing current control performance in double winding asynchronous motors in large power inverter drives , 2001 .

[112]  Thomas A. Lipo,et al.  Disturbance free operation of a multiphase current regulated motor drive with an opened phase , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.

[113]  Taehyung Kim,et al.  Reducing Torque Pulsation of Multi-Phase Interior Permanent Magnet Machines , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[114]  Hamid A. Toliyat,et al.  Evaluation of multiphase brushless permanent magnet (BPM) motors using finite element method (FEM) and experiments , 1999, APEC '99. Fourteenth Annual Applied Power Electronics Conference and Exposition. 1999 Conference Proceedings (Cat. No.99CH36285).

[115]  E. Levi,et al.  Space vector modulation schemes for a five-phase voltage source inverter , 2005, 2005 European Conference on Power Electronics and Applications.

[116]  A. Sapin,et al.  12-pulse LCI synchronous drive for a 20 MW compressor modeling, simulation and measurements , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[117]  Thomas M. Jahns,et al.  Improved Reliability in Solid-State AC Drives by Means of Multiple Independent Phase Drive Units , 1980, IEEE Transactions on Industry Applications.

[118]  Franck Betin,et al.  A new field orientation control of dual three phase induction machines , 2004, 2004 IEEE International Conference on Industrial Technology, 2004. IEEE ICIT '04..

[119]  R. Hanna,et al.  The Six-Phhase Generator and Transformer into a Three-Phase Power System , 1983, IEEE Transactions on Power Apparatus and Systems.

[120]  Hamid A. Toliyat,et al.  Rotor field oriented control of five-phase induction motor with the combined fundamental and third harmonic currents , 2001, APEC 2001. Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.01CH37181).

[121]  M. Jones,et al.  Independent vector control of asymmetrical nine-phase machines by means of series connection , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[122]  K. Gopakumar,et al.  An efficient PWM technique for split phase induction motor operation using dual voltage source inverters , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.

[123]  Alberto Tenconi,et al.  Analysis of the asymmetrical operation of dual three-phase induction machines , 2003, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03..

[124]  C. Gerada,et al.  The implications of winding faults in induction motor drives , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[125]  A. Bouscayrol,et al.  Control of a Seven-phase Axial Flux Machine Designed for Fault Operation , 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.

[126]  Franck Betin,et al.  Multi-vector SVM: a new approach to space vector modulation control for six-phase induction machines , 2005, 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005..

[127]  H.A. Toliyat,et al.  Operating principles of a novel multiphase multimotor vector-controlled drive , 2004, IEEE Transactions on Energy Conversion.

[128]  P. S. Hamer,et al.  Design, fabrication, and back-to-back test of 14200 HP, two-pole cylindrical-rotor synchronous motor for ASD application , 1996, Proceedings of 1996 IAS Petroleum and Chemical Industry Technical Conference.

[129]  Hiroshi Takami,et al.  Optimal pulse patterns of a nine‐phase voltage source PWM inverter for use with a triple three‐phase wound ac motor , 1993 .

[130]  H.A. Toliyat,et al.  A novel concept of a multiphase, multimotor vector controlled drive system supplied from a single voltage source inverter , 2004, IEEE Transactions on Power Electronics.

[131]  Teruo Kataoka,et al.  Steady-State Characteristics of a Current-Source Inverter/Double-Wound Synchronous Machine System for AC Power Supply , 1980, IEEE Transactions on Industry Applications.

[132]  Paul C. Krause,et al.  Induction Machine Analysis for Arbitrary Displacement Between Multiple Winding Sets , 1974 .

[133]  Thomas M. Jahns,et al.  Six-Phase Voltage Source Inverter Driven Induction Motor , 1984, IEEE Transactions on Industry Applications.

[134]  Philippe Delarue,et al.  Generic control method of multileg voltage-source-converters for fast practical implementation , 2003 .

[135]  John E. Fletcher,et al.  Analysis of Concentrated Winding Multi-phase Machines under Phase Failure using Decoupled Vector Space Theory , 1988 .

[136]  G. Griva,et al.  Field Oriented Control of Dual Three-Phase Induction Motor Drives using a Luenberger Flux Observer , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[137]  A. N. Golubev,et al.  Anomalous operation of multiphase asynchronous electric drive , 2001 .

[138]  C. C. Scharlau,et al.  Model of a five-phase induction machine allowing for harmonics in the air-gap field part II : transformation of co-ordinates and d-q models , 2004, 30th Annual Conference of IEEE Industrial Electronics Society, 2004. IECON 2004.

[139]  Marcelo Godoy Simões,et al.  A high-torque low-speed multiphase brushless machine-a perspective application for electric vehicles , 2002, IEEE Trans. Ind. Electron..

[140]  S. Williamson,et al.  High torque dense naval propulsion motors , 2003, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03..

[141]  P. N. Tekwani,et al.  Independent field-oriented control of two split-phase induction motors from a single six-phase inverter , 2005, IEEE Transactions on Industrial Electronics.

[142]  S. Williamson,et al.  Pulsating torque and losses in multiphase induction machines , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[143]  F. Profumo,et al.  Dual-Source Fed Multi-phase Induction Motor Drive for Fuel Cell Vehicles: Topology and Control , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.

[144]  E. Klingshirn,et al.  High Phase Order Induction Motors - Part II-Experimental Results , 1983, IEEE Transactions on Power Apparatus and Systems.

[145]  Thomas A. Lipo,et al.  Analysis and simulation of five-phase synchronous reluctance machines including third harmonic of airgap MMF , 1998 .

[146]  F. Betin,et al.  Design comparison of two rotating electrical machines for 42 V electric power steering , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[147]  S. Gataric.  A polyphase cartesian vector approach to control of polyphase AC machines , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[148]  Atif Iqbal,et al.  Vector Control of a Five-Phase Series-Connected Two-Motor Drive Using Synchronous Current Controllers , 2005 .

[149]  Barrie Mecrow,et al.  Fault-tolerant permanent magnet machine drives , 1995 .

[150]  K. Gopakumar,et al.  Independent Speed Control of Two Six-Phase Induction Motors Using a Single Six-Phase Inverter , 2004 .

[151]  C.B. Jacobina,et al.  Disturbance-free operation of a six-phase ac motor drive system , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[152]  O. Ojo,et al.  Generalized discontinuous carrier-based PWM modulation scheme for multi-phase converter-machine systems , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[153]  K. Atallah,et al.  Torque-ripple minimization in modular permanent-magnet brushless machines , 2003 .

[154]  Hamid A. Toliyat,et al.  Modeling, Control, and Experimental Investigation of a Five-Phase Series-Connected Two-Motor Drive With Single Inverter Supply , 2007, IEEE Transactions on Industrial Electronics.

[155]  Emil Levi,et al.  Space Vector PWM for a Five-Phase VSI Supplying Two Five-Phase Series-Connected Machines , 2006, 2006 12th International Power Electronics and Motion Control Conference.

[156]  M.B.R. Correa,et al.  Reduced Switch Count Dual-Winding AC Drive Systems , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.

[157]  S.S. Kalsi,et al.  Variable speed electric drive options for electric ships , 2005, IEEE Electric Ship Technologies Symposium, 2005..

[158]  F. Terrien,et al.  Multiphase induction motor sensorless control for electric ship propulsion , 2004 .

[159]  Atif Iqbal,et al.  A Space Vector PWM Technique for Symmetrical Six-Phase Voltage Source Inverters , 2007 .

[160]  A. Kheloui,et al.  Discontinuous SVPWM Techniques for Double Star Induction Motor Drive Control , 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.

[161]  Sandy Smith,et al.  Fault tolerance in multiphase propulsion motors , 2004 .

[162]  C.B. Jacobina,et al.  Reconfigurable Fault Tolerant Dual-Winding AC Motor Drive System , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.

[163]  Alberto Tenconi,et al.  Digital synchronous frame current regulation for dual three-phase induction motor drives , 2003, IEEE 34th Annual Conference on Power Electronics Specialist, 2003. PESC '03..

[164]  Barrie Mecrow,et al.  Choice of drive topologies for electrical actuation of aircraft flaps and slats , 2004 .

[165]  M.B.R. Correa,et al.  Vector and scalar modulation for six-phase voltage source inverters , 2003, IEEE 34th Annual Conference on Power Electronics Specialist, 2003. PESC '03..

[166]  Abderrezak Rezzoug,et al.  Modelling and Analysis of Dual-Stator Induction Motors , 2005 .

[167]  Thomas A. Lipo,et al.  An inverter/motor drive with common mode voltage elimination , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[168]  Hamid A. Toliyat,et al.  Analysis and simulation of five-phase variable-speed induction motor drives under asymmetrical connections , 1998 .

[169]  Atif Iqbal,et al.  Space Vector PWM Techniques for Sinusoidal Output Voltage Generation with a Five-Phase Voltage Source Inverter , 2006 .

[170]  P. Viarouge,et al.  Generalized transformations for polyphase phase-Modulation motors , 2006, IEEE Transactions on Energy Conversion.

[171]  Martin Jones,et al.  Series connected quasi-six-phase two-motor drives with independent control , 2006, Math. Comput. Simul..

[172]  Abdelaziz Kheloui,et al.  Study and Simulation of Direct Torque Control of Double-Star Induction Motor Drive , 2006, 2006 12th International Power Electronics and Motion Control Conference.

[173]  H. Henao,et al.  A spectral method of speed ripple analysis for a fault-tolerant six-phase squirrel-cage induction machine , 2005, 2005 5th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives.

[174]  Rwg Bucknall,et al.  The modelling and real-time simulation of an advanced marine full-electrical propulsion system , 2004 .

[175]  Abderrezak Rezzoug,et al.  Space vector PWM techniques for dual three-phase AC machine: analysis, performance evaluation and DSP implementation , 2003 .

[176]  M.B.R. Correa,et al.  Six-phase AC drive system with reduced common-mode voltage , 2003, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03..