Elastic stress control on the pattern of tensile fracturing around a small fault network at Nash Point, UK

Abstract Complex trajectories of fault-related opening-mode fractures at Nash Point in South Wales, UK are consistent with elastic stress fields computed for the observed fault network subject to north–south compression. The linear elasticity theory is used to calculate local stress increments produced by slip on the fault network. Faults are assumed to be free of shear stress and to slip in response to some remote stress load. Brittle failure of rock within this stress field is determined according to a combined Griffith–Coulomb criterion. Discrete fracture networks are simulated according to simple growth rules where fractures initiate according to the state of brittle failure and propagate along a surface normal to the direction of most tensile local stress. Results demonstrate the dominant opening-mode fracture were caused by a uniform body force (e.g. unloading) and are just locally perturbed by the pre-existing fault network. Fault heights of 2–3 times the mean fault block width, and regional contraction along an azimuth of 180±10° are required to reproduce the observed fracture pattern. Independent kinematic analysis of nearby faults yield estimates of the azimuth of regional contraction of 170–180°. Some features in the observed fracture pattern are not well reproduced but these are small-scale and related to small-scale irregularities on the fault planes.

[1]  M. A. Chinnery.  The deformation of the ground around surface faults , 1961 .

[2]  Arvid M. Johnson,et al.  The concept of residual stress in rock , 1979 .

[3]  J. Petit,et al.  Development of joint sets in the vicinity of faults , 2000 .

[4]  M. Zoback,et al.  New Evidence on the State of Stress of the San Andreas Fault System , 1987, Science.

[5]  Terry Engelder,et al.  2 – JOINTS AND SHEAR FRACTURES IN ROCK , 1987 .

[6]  D. Pollard,et al.  Fault linkage: Three‐dimensional mechanical interaction between echelon normal faults , 1998 .

[7]  David D. Pollard,et al.  Three-dimensional analyses of slip distributions on normal fault arrays with consequences for fault scaling , 1996 .

[8]  W. Weibull.  A statistical theory of the strength of materials , 1939 .

[9]  B. Atkinson.  Fracture Mechanics of Rock , 1987 .

[10]  Patience A. Cowie,et al.  Growth of faults by accumulation of seismic slip , 1992 .

[11]  Paul Segall,et al.  Mechanics of discontinuous faults , 1980 .

[12]  Stephen Bourne,et al.  Predictive Modelling of Naturally Fractured Reservoirs Using Geomechanics and Flow Simulation , 2001, GeoArabia.

[13]  Bernard Budiansky,et al.  Viscoelastic properties of fluid-saturated cracked solids , 1977 .

[14]  S. Hencher,et al.  Joint development in perturbed stress fields near faults , 1992 .

[15]  Z. Shipton,et al.  Fault tip displacement gradients and process zone dimensions , 1998 .

[16]  J. Steketee.  ON VOLTERRA'S DISLOCATIONS IN A SEMI-INFINITE ELASTIC MEDIUM , 1958 .

[17]  Stephen J. Martel,et al.  Effects of cohesive zones on small faults and implications for secondary fracturing and fault trace geometry , 1997 .

[18]  P. M. Trayner,et al.  Mesozoic reactivation of Variscan thrusting in the Bristol Channel area, UK , 1988, Journal of the Geological Society.

[19]  N. Price.  Fault and Joint Development in Brittle and Semi-brittle Rock , 1966 .

[20]  C. Scholz,et al.  Fault growth and fault scaling laws: Preliminary results , 1993 .

[21]  D. Sanderson,et al.  Effects of layering and anisotropy on fault geometry , 1992, Journal of the Geological Society.

[22]  P. L. Hancock,et al.  Brittle microtectonics: principles and practice , 1985 .

[23]  R. A. Chadwick.  Extension tectonics in the Wessex Basin, southern England , 1986, Journal of the Geological Society.

[24]  D. Pollard,et al.  8 – THEORETICAL DISPLACEMENTS AND STRESSES NEAR FRACTURES IN ROCK: WITH APPLICATIONS TO FAULTS, JOINTS, VEINS, DIKES, AND SOLUTION SURFACES , 1987 .

[25]  R. Rispoli.  Stress fields about strike-slip faults inferred from stylolites and tension gashes , 1981 .

[26]  Leon M Keer,et al.  Modeling slip zones with triangular dislocation elements , 1992 .

[27]  John F. Harris,et al.  Relation of Deformational Fractures in Sedimentary Rocks to Regional and Local Structure , 1960 .

[28]  Y. Okada.  Surface deformation due to shear and tensile faults in a half-space , 1985 .

[29]  Maria Comninou,et al.  The angular dislocation in a half space , 1975 .

[30]  S. Martel,et al.  Geometry and mechanics of secondary fracturing around small three‐dimensional faults in granitic rock , 1998 .

[31]  E. Willemse.  Segmented normal faults: Correspondence between three‐dimensional mechanical models and field data , 1997 .

[32]  Richard J. Lisle,et al.  Detection of Zones of Abnormal Strains in Structures Using Gaussian Curvature Analysis , 1994 .

[33]  D. Pollard,et al.  On the orientation and patterns of wing cracks and solution surfaces at the tips of a sliding flaw or fault , 1998 .

[34]  J. Petit,et al.  Joints in the Mesozoic sediments around the Bristol Channel Basin , 1998 .

[35]  T. Davis,et al.  Three-dimensional multicomponent imaging of reservoir heterogeneity, Silo Field, Wyoming : Geophysics V56, N12, Dec 1991, P2048–2056 , 1991 .

[36]  A. Aydin,et al.  Effect of mechanical interaction on the development of strike-slip faults with echelon patterns , 1990 .

[37]  David D. Pollard,et al.  Slip distributions on faults: effects of stress gradients, inelastic deformation, heterogeneous host-rock stiffness, and fault interaction , 1994 .

[38]  Donald L. Turcotte,et al.  Geodynamics : applications of continuum physics to geological problems , 1982 .

[39]  T. Engelder.  Loading paths to joint propagation during a tectonic cycle: an example from the Appalachian Plateau, U.S.A. , 1985 .