High step-up continuous input current LCCT-Z-source inverters for fuel cells

Z-source inverters (ZSIs) are suited for applications which require a large range of voltage gain, such as in fuel cells. The present paper extends the concept of ZSIs. New type high step-up LCCT-Z-source inverter dedicated for fuel cells is proposed in the paper. Compared to recently proposed modifications of basic Z-source inverter the new topology has the advantages of available continuous input current, improved boost ratio and simple topology. Thanks to application of transformer with turns ratio higher than one the proposed LCCT-Z-source can operate with lower shoot-through ratio and higher modulation index compared to ZSI. The existence of two built-in DC-current-blocking capacitors connected in series with transformer windings prevents the transformer core from saturation. Simulation and experimental results are provided to verify the reliability of the proposed topology.

[1]  Grzegorz Benysek,et al.  Power Electronics in Smart Electrical Energy Networks , 2010 .

[2]  Fang Zheng Peng,et al.  Application of Z-Source Inverter for Traction Drive of Fuel Cell—Battery Hybrid Electric Vehicles , 2007, IEEE Transactions on Power Electronics.

[3]  Marek Adamowicz,et al.  T-source inverter , 2009 .

[4]  Fang Zheng Peng.  Z-source inverter , 2002 .

[5]  Wei Qian,et al.  Trans-Z-Source Inverters , 2010, IEEE Transactions on Power Electronics.

[6]  Gooi Hoay Beng,et al.  Extended-Boost $Z$-Source Inverters , 2009, IEEE Transactions on Power Electronics.

[7]  Dmitri Vinnikov,et al.  Performance improvement method for the voltage-fed qZSI with continuous input current , 2010, Melecon 2010 - 2010 15th IEEE Mediterranean Electrotechnical Conference.

[8]  Zhaoming Qian,et al.  An improved topology of boost converter with ripple free input current , 2000, APEC 2000. Fifteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.00CH37058).

[9]  Friedrich Wilhelm Fuchs,et al.  Converter Systems for Fuel Cells in the Medium Power Range—A Comparative Study , 2010, IEEE Transactions on Industrial Electronics.

[10]  Yoon-Ho Kim,et al.  A fuel cell system with Z-source inverters and ultracapacitors , 2004, The 4th International Power Electronics and Motion Control Conference, 2004. IPEMC 2004..

[11]  F.Z. Peng,et al.  Z-source inverter , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[12]  S.K. Mazumder,et al.  A Ripple-Mitigating and Energy-Efficient Fuel Cell Power-Conditioning System , 2007, IEEE Transactions on Power Electronics.

[13]  F.Z. Peng,et al.  Four quasi-Z-Source inverters , 2008, 2008 IEEE Power Electronics Specialists Conference.

[14]  Wei Qian,et al.  Trans-Z-Source Inverters , 2011 .

[15]  Fang Lin Luo,et al.  Switched Inductor Z-Source Inverter , 2010, IEEE Transactions on Power Electronics.

[16]  F. Blaabjerg,et al.  Buck-boost impedance networks , 2007, 2007 European Conference on Power Electronics and Applications.

[17]  Omar Wing,et al.  Classical Circuit Theory , 2008 .

[18]  Douglas J. Nelson,et al.  Fuel cell systems: efficient, flexible energy conversion for the 21st century , 2001, Proc. IEEE.

[19]  T. Meynard,et al.  Interactions Between Fuel Cells and Power Converters: Influence of Current Harmonics on a Fuel Cell Stack , 2007, IEEE Transactions on Power Electronics.

[20]  Fang Lin Luo,et al.  Remaining Inductor Current Phenomena of Complex DC–DC Converters in Discontinuous Conduction Mode: General Concepts and Case Study , 2008, IEEE Transactions on Power Electronics.

[21]  E. Guillemin,et al.  What is Network Synthesis? , 1952, Transactions of the IRE Professional Group on Circuit Theory.

[22]  J.-W. Jung,et al.  Modeling and control of a fuel cell based Z-source converter , 2005, Twentieth Annual IEEE Applied Power Electronics Conference and Exposition, 2005. APEC 2005..

[23]  Ryszard Strzelecki,et al.  New type T-Source inverter , 2009, 2009 Compatibility and Power Electronics.