A novel multi-period mixed-integer linear optimization model for optimal distribution of byproduct gases, steam and power in an iron and steel plant

Byproduct gases, steam and electricity play an important role in providing energy for production units in the iron and steel industry. Optimal distribution of byproduct gases, steam and electricity in an iron and steel plant can significantly decrease energy cost and reduce CO2 emissions. However, such optimal distribution is not trivial because it involves many production units, steam turbines, combined heat and power units, and waste heat and energy recovery units, and several realistic operational features such as byproduct gas mixing, byproduct gas level control in dedicated gasholders, different levels of steam requirement, minimum heating and energy requirement, and maximum allowable burner switches, resulting in a large complex combinatorial problem. In this paper, we develop a novel multi-period mixed-integer linear programming model for optimal distribution of byproduct gases, steam, and power in an iron and steel plant. The consuming rates of byproduct gases are variable. Different byproduct gases are allowed to be mixed to satisfy minimum heating and energy requirement of production units. The steam is specifically classified as high, medium and low pressure. New binary variables are introduced to determine electricity purchase or sale decision with each having different price. The burner switching operation is correctly modeled with fewer binary variables allowing turning on and off at any time. Several important practical features such as fuel selection, gasholder level control, ramp rate variation, piecewise constant generation rates of byproduct gases, and piecewise constant demand profiles of byproduct gases, steam and electricity are also incorporated. The computational results demonstrate that the optimal operating cost is obtained within 2 CPU seconds for an industrial example using the proposed model, which is reduced by 6% compared to that from actual operation.

[1]  Jie Li,et al.  Recipe determination and scheduling of gasoline blending operations , 2009 .

[2]  Gang Li,et al.  An MILP model for optimization of byproduct gases in the integrated iron and steel plant , 2010 .

[3]  Peng Jin,et al.  The energy consumption and carbon emission of the integrated steel mill with oxygen blast furnace , 2017 .

[4]  Qi Shi,et al.  A MILP model concerning the optimisation of penalty factors for the short-term distribution of byproduct gases produced in the iron and steel making process , 2015 .

[5]  Edoardo Amaldi,et al.  A detailed MILP optimization model for combined cooling, heat and power system operation planning , 2014 .

[6]  Yoshikazu Nishikawa,et al.  An optimal gas supply for a power plant using a mixed integer programming model , 1991, Autom..

[7]  Tengfang Xu,et al.  A bottom-up model to estimate the energy efficiency improvement and CO2 emission reduction potentials in the Chinese iron and steel industry , 2013 .

[8]  Lingen Chen,et al.  Constructal design of a blast furnace iron-making process based on multi-objective optimization , 2016 .

[9]  Robin Smith,et al.  Design and Optimization of Flexible Utility Systems Subject to Variable Conditions: Part 1: Modelling Framework , 2007 .

[10]  Ying Meng,et al.  Coil Batching to Improve Productivity and Energy Utilization in Steel Production , 2016, Manuf. Serv. Oper. Manag..

[11]  Ernst Worrell,et al.  Energy Intensity Development of the German Iron and Steel Industry between 1991 and 2007 , 2012 .

[12]  Thomas F. Edgar,et al.  Optimal scheduling of combined heat and power plants using mixed-integer nonlinear programming , 2014 .

[13]  Yan-guang Sun,et al.  Short-term Scheduling of Steam Power System in Iron and Steel Industry under Time-of-use Power Price , 2015 .

[14]  Xiaolei Wang,et al.  Promoting energy conservation in China's iron & steel sector , 2014 .

[15]  Wenqiang Sun,et al.  Optimal allocation of surplus gas and suitable capacity for buffer users in steel plant , 2017 .

[16]  João G. Coelho Pena,et al.  An improved plant-wide multiperiod optimization model of a byproduct gas supply system in the iron and steel-making process , 2016 .

[17]  Qi Zhang,et al.  Multi-Period Optimal Distribution Model of Energy Medium and Its Application , 2011 .

[18]  Jianling Zhang,et al.  Energy saving technologies and productive efficiency in the Chinese iron and steel sector , 2008 .

[19]  Ignacio E. Grossmann,et al.  Optimal scheduling of industrial combined heat and power plants under time-sensitive electricity prices , 2013 .

[20]  Feng He,et al.  Energy efficiency and productivity change of China’s iron and steel industry: Accounting for undesirable outputs , 2013 .

[21]  I. Karimi,et al.  Scheduling Gasoline Blending Operations from Recipe Determination to Shipping Using Unit Slots , 2011 .

[22]  Abbas Seifi,et al.  A system dynamics analysis of energy consumption and corrective policies in Iranian iron and steel industry , 2012 .

[23]  Ernst Worrell,et al.  Co-benefits of energy efficiency improvement and air pollution abatement in the Chinese iron and steel industry , 2014 .

[24]  Chonghun Han,et al.  A Novel MILP Model for Plantwide Multiperiod Optimization of Byproduct Gas Supply System in the Iron- and Steel-Making Process , 2003 .

[25]  C. Floudas,et al.  Production Scheduling of a Large-Scale Steelmaking Continuous Casting Process via Unit-Specific Event-Based Continuous-Time Models: Short-Term and Medium-Term Scheduling , 2012 .