A flammability performance comparison between synthetic and natural clays in polystyrene nanocomposites

Polymer-clay nanocomposites are a newer class of flame retardant materials of interest due to their balance of mechanical, thermal and flammability properties. Much more work has been done with natural clays than with synthetic clays for nanocomposite flammability applications. There are advantages and disadvantages to both natural and synthetic clay use in a nanocomposite, and some of these, both fundamental and practical, will be discussed in this paper. To compare natural and synthetic clays in regards to polymer flammability, two clays were used. The natural clay was a US mined and refined montmorillonite, while the synthetic clay was a fluorinated synthetic mica. These two clays were used as inorganic clays for control experiments in polystyrene, and then converted into an organoclay by ion exchange with an alkyl ammonium salt. The organoclays were used to synthesize polystyrene nanocomposites by melt compounding. Each of the formulations was analysed by X-ray diffraction (XRD), thermogravimetric analysis (TGA) and transmission electron microscopy (TEM). Flammability performance was measured by cone calorimeter. The data from the experiments show that the synthetic clay does slightly better at reducing the heat release rate (HRR) than the natural clay. However, all the samples, including the inorganic clay polystyrene microcomposites, showed a decreased time to ignition, with the actual nanocomposites showing the most marked decrease. The reason for this is postulated to be related to the thermal instability of the organoclay (via the quaternary alkyl ammonium). An additional experiment using a more thermally stable organoclay showed a time to ignition identical to that of the base polymer. Finally, it was shown that while polymer-clay nanocomposites (either synthetic or natural clay based) greatly reduce the HRR of a material, making it more fire safe, they do not provide ignition resistance by themselves, at least, at practical loadings. Specifically, the cone calorimeter HRR curve data appear to support that these nanocomposites continue to burn once ignited, rather than self-extinguish.

[1]  A. Balazs,et al.  Attraction between Surfaces in a Polymer Melt Containing Telechelic Chains: Guidelines for Controlling the Surface Separation in Intercalated Polymer−Clay Composites , 1999 .

[2]  Suprakas Sinha Ray,et al.  POLYMER/LAYERED SILICATE NANOCOMPOSITES: A REVIEW FROM PREPARATION TO PROCESSING , 2003 .

[3]  A. Balazs,et al.  Theoretical Phase Diagrams of Polymer/Clay Composites: The Role of Grafted Organic Modifiers , 2000 .

[4]  C. A. Wilkie,et al.  Studies on the Mechanism by Which the Formation of Nanocomposites Enhances Thermal Stability , 2001 .

[5]  Takashi Kashiwagi,et al.  Flammability Studies of Polymer Layered Silicate Nanocomposites: Polyolefin, Epoxy and Vinyl Ester Resins , 1999 .

[6]  A. Morgan,et al.  Effects of organoclay Soxhlet extraction on mechanical properties, flammability properties and organoclay dispersion of polypropylene nanocomposites , 2003 .

[7]  M. Jaroniec,et al.  A Unified Interpretation of High-Temperature Pore Size Expansion Processes in MCM-41 Mesoporous Silicas , 1999 .

[8]  Marco Zanetti,et al.  Fire Retardant Halogen-Antimony-Clay Synergism in Polypropylene Layered Silicate Nanocomposites , 2002 .

[9]  R. Mülhaupt,et al.  Synthesis and thermal behaviour of layered silicate-EVA nanocomposites , 2001 .

[10]  Bernhard Schartel,et al.  Layered silicate polymer nanocomposites: new approach or illusion for fire retardancy? Investigations of the potentials and the tasks using a model system , 2004 .

[11]  T. Pinnavaia,et al.  Pore size modification of mesoporous HMS molecular sieve silicas with wormhole framework structures , 2001 .

[12]  Jeffrey W. Gilman,et al.  Flammability and thermal stability studies of polymer layered-silicate (clay) nanocomposites , 1999 .

[13]  J. Gilman,et al.  Characterization of the Dispersion of Clay in a Polyetherimide Nanocomposite , 2001 .

[14]  Takashi Kashiwagi,et al.  Flammability of polymer clay nanocomposites consortium:: year one annual report , 2000 .

[15]  Wei Xie,et al.  Thermal Degradation Chemistry of Alkyl Quaternary Ammonium Montmorillonite , 2001 .

[16]  Günter Beyer,et al.  Flame retardant properties of EVA‐nanocomposites and improvements by combination of nanofillers with aluminium trihydrate , 2001 .

[17]  R. Mülhaupt,et al.  Combustion behaviour of EVA/Fluorohectorite nanocomposites , 2001 .

[18]  A. Weiss,et al.  Replication and Evolution in Inorganic Systems , 1981 .

[19]  S. Bourbigot,et al.  The Use of Clay in an EVA-Based Intumescent Formulation. Comparison with the Intumescent Formulation Using Polyamide-6 Clay Nanocomposite As Carbonisation Agent , 2001 .

[20]  Richard H. Harris,et al.  Flammability Properties of Polymer - Layered-Silicate Nanocomposites. Polypropylene and Polystyrene Nanocomposites , 2000 .