State-of-the-Art Technologies for Development of High Frequency Transformers with Advanced Magnetic Materials

With the development of advanced soft magnetic materials of high-saturation flux density and low specific core loss and semiconductor power devices, the high-frequency transformer (HFT) has received significant attention in recent years for its widespread emerging applications. The optimal design of high-power-density HFTs for high-performance energy conversion systems is, however, a multiphasic problem that needs special considerations on various aspects such as core material selection, minimization of parasitic components, and thermal management. This paper presents a comprehensive review on advancement of soft magnetic materials for high-power-density magnetic devices and advanced technologies for characterizations and optimal design of HFTs. The future research and development trends are also discussed.

[1]  S. Nakajima,et al.  Amorphous Transformer Contributing to Global Environmental Protection , 2011 .

[2]  Bin Li,et al.  High-Frequency Transformer Design for Modular Power Conversion From Medium-Voltage AC to 400 VDC , 2018, IEEE Transactions on Power Electronics.

[3]  Kashem M. Muttaqi,et al.  Design and Implementation of Amorphous Magnetic Material Common Magnetic Bus for the Replacement of Common DC Bus , 2018, IEEE Transactions on Magnetics.

[4]  Dimitris P. Labridis,et al.  Multiterminal DC Transmission Systems Based on Superconducting Cables Feasibility Study, Modeling, and Control , 2018, IEEE Transactions on Applied Superconductivity.

[6]  Pablo Sanchis,et al.  Analytical Design Methodology for Litz-Wired High-Frequency Power Transformers , 2015, IEEE Transactions on Industrial Electronics.

[7]  Torbjorn Thiringer,et al.  Accurate Evaluation of Leakage Inductance in High-Frequency Transformers Using an Improved Frequency-Dependent Expression , 2015, IEEE Transactions on Power Electronics.

[8]  M. Perry,et al.  Multiple Layer Series Connected Winding Design for Minimum Losses , 1979, IEEE Transactions on Power Apparatus and Systems.

[9]  Jianguo Zhu,et al.  Power Converters for Medium Voltage Networks , 2014 .

[10]  Hanen Mejbri,et al.  An Improved Empirical Formulation for Magnetic Core Losses Estimation Under Nonsinusoidal Induction , 2017, IEEE Transactions on Power Electronics.

[11]  P. L. Dowell,et al.  Effects of eddy currents in transformer windings , 1966 .

[12]  Yan-Fei Liu,et al.  A Practical Transformer Core Loss Measurement Scheme for High-Frequency Power Converter , 2008, IEEE Transactions on Industrial Electronics.

[13]  Jianguo Zhu,et al.  A Multilevel Medium-Voltage Inverter for Step-Up-Transformer-Less Grid Connection of Photovoltaic Power Plants , 2014, IEEE Journal of Photovoltaics.

[14]  Johann W. Kolar,et al.  Design and Experimental Analysis of a Medium-Frequency Transformer for Solid-State Transformer Applications , 2017, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[15]  T. Izumi,et al.  Design Study of 15-MW Fully Superconducting Generators for Offshore Wind Turbine , 2016, IEEE Transactions on Applied Superconductivity.

[16]  J.A. Ferreira,et al.  Appropriate modelling of conductive losses in the design of magnetic components , 1990, 21st Annual IEEE Conference on Power Electronics Specialists.

[17]  Mingkai Mu,et al.  High Frequency Magnetic Core Loss Study , 2013 .

[18]  Marian K. Kazimierczuk,et al.  Self-capacitance of inductors , 1997 .

[19]  Amin Bahmani.  Design and Optimization Considerations of Medium-Frequency Power Transformers in High-Power DC-DC Applications , 2016 .

[20]  Ying Xin,et al.  Enabling High-Temperature Superconducting Technologies Toward Practical Applications , 2014, IEEE Transactions on Applied Superconductivity.

[21]  Fred C. Lee,et al.  New High-Frequency Core Loss Measurement Method With Partial Cancellation Concept , 2017, IEEE Transactions on Power Electronics.

[22]  Junwei Lu,et al.  Integrated High-Frequency Coaxial Transformer Design Platform Using Artificial Neural Network Optimization and FEM Simulation , 2015, IEEE Transactions on Magnetics.

[23]  Chas.P. Steinmetz,et al.  On the law of hysteresis , 1984, Proceedings of the IEEE.

[24]  A. W. Kelley,et al.  An improved calorimeter for measuring the core loss of magnetic materials , 2000, APEC 2000. Fifteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.00CH37058).

[25]  Rolando Burgos,et al.  Review of Solid-State Transformer Technologies and Their Application in Power Distribution Systems , 2013, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[26]  J. A. Ferreira.  Analytical computation of AC resistance of round and rectangular litz wire windings , 1992 .

[27]  Charles R. Sullivan,et al.  Accurate prediction of ferrite core loss with nonsinusoidal waveforms using only Steinmetz parameters , 2002, 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings..

[28]  Zhi Hao Wu,et al.  Advanced HTS DC Transmission With Self-Protection Function , 2016, IEEE Transactions on Applied Superconductivity.

[29]  Z. Deng,et al.  A High-Temperature Superconducting Maglev Ring Test Line Developed in Chengdu, China , 2016, IEEE Transactions on Applied Superconductivity.

[30]  Tiago Bandeira Marchesan,et al.  Analytical Calculation of Static Capacitance for High-Frequency Inductors and Transformers , 2019, IEEE Transactions on Power Electronics.

[31]  Jianguo Zhu,et al.  Optimal Design of High-Frequency Magnetic Links for Power Converters Used in Grid-Connected Renewable Energy Systems , 2014, IEEE Transactions on Magnetics.

[32]  J. W. Kolar,et al.  Improved Core-Loss Calculation for Magnetic Components Employed in Power Electronic Systems , 2012, IEEE Transactions on Power Electronics.

[33]  J.W. Kolar,et al.  Self-Capacitance of High-Voltage Transformers , 2007, IEEE Transactions on Power Electronics.

[34]  Edris Agheb,et al.  Modification of empirical core loss calculation methods including flux distribution , 2013 .

[35]  Torbjorn Thiringer,et al.  Design methodology and optimization of a medium frequency transformer for high power DC-DC applications , 2015, 2015 IEEE Applied Power Electronics Conference and Exposition (APEC).

[36]  Jianguo Zhu,et al.  A High-Frequency Link Multilevel Cascaded Medium-Voltage Converter for Direct Grid Integration of Renewable Energy Systems , 2014, IEEE Transactions on Power Electronics.

[37]  Hae-Joong Kim,et al.  Design of a 10-MW-Class HTS Homopolar Generator for Wind Turbines , 2017, IEEE Transactions on Applied Superconductivity.

[38]  Juergen Biela,et al.  Influence of Material Properties and Geometric Shape of Magnetic Cores on Acoustic Noise Emission of Medium-Frequency Transformers , 2017, IEEE Transactions on Power Electronics.

[39]  Jianguo Zhu,et al.  Calculation of Capacitance in High-Frequency Transformer Windings , 2016, IEEE Transactions on Magnetics.

[40]  Fred C. Lee,et al.  A high frequency core loss measurement method for arbitrary excitations , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[41]  M. Ohta,et al.  Development of Block Cores Comprising High- $B_{s}$ Nanocrystalline Alloy Ribbon , 2018, IEEE Transactions on Magnetics.

[42]  Jianguo Zhu,et al.  An amorphous alloy core medium frequency magnetic-link for medium voltage photovoltaic inverters , 2014 .

[43]  D. Boroyevich,et al.  Loss Characterization and Calculation of Nanocrystalline Cores for High-Frequency Magnetics Applications , 2007, IEEE Transactions on Power Electronics.

[44]  G. F. Pierce,et al.  Measurement techniques for the design of high-frequency SMPS transformers , 1988, APEC '88 Third Annual IEEE Applied Power Electronics Conference and Exposition.

[45]  Md. Rabiul Islam,et al.  High-Frequency Magnetic-Link Medium-Voltage Converter for Superconducting Generator-Based High-Power Density Wind Generation Systems , 2014, IEEE Transactions on Applied Superconductivity.

[46]  Alfred Rufer,et al.  Global Loss Evaluation Methods for Nonsinusoidally Fed Medium-Frequency Power Transformers , 2009, IEEE Transactions on Industrial Electronics.

[47]  Peng Sun,et al.  The Finite Element Analysis of the Leakage Inductance for High Frequency Switching Mode Power Supply Transformer , 2012 .

[48]  J. W. Kolar,et al.  Optimized design of medium frequency transformers with high isolation requirements , 2010, IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society.

[49]  W. G. Hurley,et al.  Calculation of Leakage Inductance for High-Frequency Transformers , 2015, IEEE Transactions on Power Electronics.

[50]  Fred C. Lee,et al.  New Core Loss Measurement Method for High-Frequency Magnetic Materials , 2010, IEEE Transactions on Power Electronics.

[51]  W. Eberle,et al.  New measurement methods to characterize transformer core loss and copper loss in high frequency switching mode power supplies , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[52]  R. D. De Doncker,et al.  Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[53]  M. Kazimierczuk,et al.  Comparison of various methods for calculating the AC resistance of inductors , 2002 .

[54]  Zhang Liang,et al.  Optimisation design of medium frequency transformer for the offshore dc grid based on multi-objective genetic algorithm , 2017 .

[55]  Youguang Guo,et al.  Modular Medium-Voltage Grid-Connected Converter With Improved Switching Techniques for Solar Photovoltaic Systems , 2017, IEEE Transactions on Industrial Electronics.

[56]  C.R. Sullivan,et al.  Improved calculation of core loss with nonsinusoidal waveforms , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[57]  Xian Yong Xiao,et al.  HTS Power Devices and Systems: Principles, Characteristics, Performance, and Efficiency , 2016, IEEE Transactions on Applied Superconductivity.

[58]  Jianguo Zhu,et al.  A medium frequency transformer with multiple secondary windings for medium voltage converter based wind turbine power generating systems , 2013 .

[59]  Glenn Platt,et al.  Design and Implementation of an Amorphous High-Frequency Transformer Coupling Multiple Converters in a Smart Microgrid , 2017, IEEE Transactions on Industrial Electronics.

[60]  J.A. Ferreira,et al.  Design for better thermal management in high-power high-frequency transformers , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[61]  M. Bartoli,et al.  Modeling Litz-wire winding losses in high-frequency power inductors , 1996, PESC Record. 27th Annual IEEE Power Electronics Specialists Conference.

[62]  Andrea Cavagnino,et al.  Soft Magnetic Material Status and Trends in Electric Machines , 2017, IEEE Transactions on Industrial Electronics.

[63]  Gang Chen,et al.  Overview of power loss measurement techniques in power electronics systems , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[64]  A. Van den Bossche,et al.  Measurement and loss model of ferrites with non-sinusoidal waveforms , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[65]  Jun Zheng,et al.  High-Temperature Superconducting Magnetic Levitation Vehicles: Dynamic Characteristics While Running on a Ring Test Line , 2017, IEEE Vehicular Technology Magazine.

[66]  Fausto Fiorillo,et al.  Prediction of Energy Losses in Soft Magnetic Materials Under Arbitrary Induction Waveforms and DC Bias , 2017, IEEE Transactions on Industrial Electronics.

[67]  Seyed Ali Mousavi,et al.  Investigation of GIC effects on core losses in single phase power transformers , 2011 .

[68]  Ryusuke Hasegawa,et al.  Soft Magnetic Properties of Magnetic Cores Assembled With a High $B_{s}$ Fe-Based Nanocrystalline Alloy , 2017, IEEE Transactions on Magnetics.