On-machine measurement method for the geometric error of shafts with a large ratio of length to diameter

Abstract For shafts with a large ratio of length to diameter, the existing measurement method mainly uses a contact coordinate machine. But machining errors have a strong influence on the offline measurement results, and the accumulation errors of the measurement system also make the measurement datum difficult to identify. For this reason, a new on-machine measuring method is proposed based on the spatial analytical geometry theory to achieve the measurement of the shape and position tolerance of shafts. Through the method, the measurement system combines the line laser measuring instrument and the laser displacement sensor together. Then, the ideal central axis of the workpieces can be obtained and serve as a datum. Finally, the on-machine non-contact measurement of large-size shafts with geometric errors is realized with high measurement accuracy (

[1]  Gábor Stépán,et al.  Laser scanned patterns of machined surfaces , 2018 .

[2]  Guangjun Zhang,et al.  Complete calibration of a structured light stripe vision sensor through planar target of unknown orientations , 2005, Image Vis. Comput..

[3]  Xian-bin Fu,et al.  The dynamic position compensation method of the online laser detection system for the ring workpiece , 2019, Measurement.

[4]  Songling Huang,et al.  Laser based measurement for the monitoring of shaft misalignment. , 2016 .

[5]  Jean-Pierre Kruth,et al.  Automated dimensional inspection planning using the combination of laser scanner and tactile probe , 2012 .

[6]  Liding Wang,et al.  A large-scale laser plane calibration system , 2007 .

[7]  Peng Zheng,et al.  In-process measuring method for the size and roundness of workpiece with discontinuous surface in cylindrical grinding process , 2020 .

[8]  Fang-Jung Shiou,et al.  Development of a novel scattered triangulation laser probe with six linear charge-coupled devices (CCDs) , 2009 .

[9]  Soichi Ibaraki,et al.  On-machine identification of rotary axis location errors under thermal influence by spindle rotation , 2019 .

[10]  Yasuhiro Takaya,et al.  On-machine dimensional measurement of large parts by compensating for volumetric errors of machine tools , 2016 .

[11]  Yi Qin,et al.  A new static method of calibration for low-cost laser triangulation systems , 2020 .

[12]  K. Stępień,et al.  Cylindricity measurement by the V-block method – Theoretical and practical problems , 2011 .

[14]  Ismail Lazoglu,et al.  Design and analysis of a 3D laser scanner , 2017 .

[15]  Yoshihiro Deguchi,et al.  Development of receiver optics for simplified 3D laser scanner composition , 2019, Measurement.

[16]  Chao Bi,et al.  Extrinsic calibration of a laser displacement sensor in a non-contact coordinate measuring machine , 2017 .

[17]  V. J. Bogev,et al.  New Technology for Measuring Geometric Parameters of Large-Sized Rotary Parts , 2018, 2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon).

[18]  Fangyu Peng,et al.  A measurement strategy and an error-compensation model for the on-machine laser measurement of large-scale free-form surfaces , 2014 .

[19]  Radovan Kovacevic,et al.  A laser-based machine vision measurement system for laser forming , 2016 .