Application of Kalman Filter to Estimate Junction Temperature in IGBT Power Modules

Knowledge of instantaneous junction temperature is essential for effective health management of power converters, enabling safe operation of the power semiconductors under all operating conditions. Methods based on fixed thermal models are typically unable to compensate for degradation of the thermal path resulting from aging and the effect of variable cooling conditions. Thermosensitive electrical parameters (TSEPs), on the other hand, can give an estimate of junction temperature TJ, but measurement inaccuracies and the masking effect of varying operating conditions can corrupt the estimate. This paper presents a robust and noninvasive real-time estimate of junction temperature that can provide enhanced accuracy under all operating and cooling conditions when compared to model-based or TSEP-based methods alone. The proposed method uses a Kalman filter to fuse the advantages of model-based estimates and an online measurement of TSEPs. Junction temperature measurements are obtained from an online measurement of the on-state voltage, VCE (ON), at high current and processed by a Kalman filter, which implements a predict-correct mechanism to generate an adaptive estimate of TJ. It is shown that the residual signal from the Kalman filter may be used to detect changes in thermal model parameters, thus allowing the assessment of thermal path degradation. The algorithm is implemented on a full-bridge inverter and the results verified with an IR camera.

[1]  Magda Osman,et al.  Control Systems Engineering , 2010 .

[2]  Ovidiu Vermesan,et al.  High temperature power electronics IGBT modules for electrical and hybrid vehicles , 2009 .

[3]  Robert D. Lorenz,et al.  Active thermal control of power electronics modules , 2003 .

[4]  Jorg Roth-Stielow,et al.  Chances and limits of a thermal control for a three-phase voltage source inverter in traction applications using permanent magnet synchronous or induction machines , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[5]  E. Bianda,et al.  Online estimation of IGBT junction temperature (Tj) using gate-emitter voltage (Vge) at turn-off , 2013, 2013 15th European Conference on Power Electronics and Applications (EPE).

[6]  Ebrahim Farjah,et al.  Application and analysis of thermosensitive parameters in the case of hybrid power modules , 1994, Proceedings of 1994 IEEE Industry Applications Society Annual Meeting.

[7]  Tore Undeland,et al.  Power Electronics: Converters, Applications and Design , 1989 .

[8]  Wei Qiao,et al.  An effective heat propagation path-based online adaptive thermal model for IGBT modules , 2014, 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014.

[9]  Seung-Ki Sul,et al.  On-line estimation of IGBT junction temperature using on-state voltage drop , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[10]  M. Pecht,et al.  Precursor Parameter Identification for Insulated Gate Bipolar Transistor (IGBT) Prognostics , 2009, IEEE Transactions on Reliability.

[11]  Mohinder S. Grewal,et al.  Kalman Filtering: Theory and Practice Using MATLAB , 2001 .

[12]  Uwe Scheuermann,et al.  Using the chip as a temperature sensor — The influence of steep lateral temperature gradients on the Vce(T)-measurement , 2009, 2009 13th European Conference on Power Electronics and Applications.

[13]  Volker Pickert,et al.  Estimation and control of power electronic device temperature during operation with variable conducting current , 2007, IET Circuits Devices Syst..

[14]  Michael G. Pecht,et al.  A prognostic approach for non-punch through and field stop IGBTs , 2012, Microelectron. Reliab..

[15]  M. Liserre,et al.  Junction temperature measurements via thermo-sensitive electrical parameters and their application to condition monitoring and active thermal control of power converters , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[16]  Johnson,et al.  Determination of thermal cross-coupling effects in mufti-idevice power electronic modules , 1988 .

[17]  W. Brekel,et al.  Time Resolved In Situ Tvj Measurements of 6 . 5 kV IGBTs during Inverter Operation , 2009 .

[18]  Huifeng Chen,et al.  Real-Time Temperature Estimation for Power MOSFETs Considering Thermal Aging Effects , 2014, IEEE Transactions on Device and Materials Reliability.

[19]  Chunyan Yin,et al.  In-service life consumption estimation in power modules , 2008, 2008 13th International Power Electronics and Motion Control Conference.

[20]  Peter Tavner,et al.  Condition Monitoring for Device Reliability in Power Electronic Converters: A Review , 2010, IEEE Transactions on Power Electronics.

[21]  Hui Huang,et al.  A Lifetime Estimation Technique for Voltage Source Inverters , 2013, IEEE Transactions on Power Electronics.

[22]  G. Nicoletti,et al.  Fast power cycling test of IGBT modules in traction application , 1997, Proceedings of Second International Conference on Power Electronics and Drive Systems.

[23]  Constantine Alois Neugebauer,et al.  Hot Spots Caused by Voids and Cracks in the Chip Mountdown Medium in Power Semiconductor Packaging , 1983 .

[24]  Volker Pickert,et al.  A thermal model for a multichip device with changing cooling conditions , 2008 .

[25]  C Mark Johnson,et al.  Real-Time Compact Thermal Models for Health Management of Power Electronics , 2010, IEEE Transactions on Power Electronics.

[26]  Pericle Zanchetta,et al.  Dynamic active cooling for improved power system reliability , 2011, Microelectron. Reliab..

[27]  Daniel Domes,et al.  IGBT-Module integrated Current and Temperature Sense Features based on Sigma-Delta Converter , 2009 .

[28]  O. Karim,et al.  Heat transfer coefficient for water cooled heat sink: application for standard power modules cooling at high temperature , 2001, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230).

[29]  S. Bernet,et al.  Estimation and measurement of junction temperatures in a three-level voltage source converter , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[30]  Salvatore D'Arco,et al.  Thermal stress analysis of IGBT modules in VSCs for PMSG in large offshore Wind Energy Conversion Systems , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[31]  Dr. Martin März,et al.  Thermal Modeling of Power-electronic Systems , 2000 .

[32]  C. Mark Johnson,et al.  Thermal path integrity monitoring for IGBT power electronics modules , 2014 .

[33]  R. K. Mehra,et al.  Correspondence item: An innovations approach to fault detection and diagnosis in dynamic systems , 1971 .