Low-Power and Low-Cost Environmental IoT Electronic Nose Using Initial Action Period Measurements

In this work, we present a complete hardware development and current consumption study of a portable electronic nose designed for the Internet-of-Things (IoT). Thanks to the technique of measuring in the initial action period, it can be reliably powered with a moderate-sized battery. The system is built around the well-known SoC (System on Chip) ESP8266EX, using low-cost electronics and standard sensors from Figaro’s TGS26xx series. This SoC, in addition to a powerful microcontroller, provides Wi-Fi connectivity, making it very suitable for IoT applications. The system also includes a precision analog-to-digital converter for the measurements and a charging module for the lithium battery. During its operation, the designed software takes measurements periodically, and keeps the microcontroller in deep-sleep state most of the time, storing several measurements before uploading them to the cloud. In the experiments and tests carried out, we have focused our work on the measurement and optimization of current consumption, with the aim of extending the battery life. The results show that taking measurements every 4 min and uploading data every five measurements, the battery of 750 mAh needs to be charged approximately once a month. Despite the fact that we have used a specific model of gas sensor, this methodology is quite generic and could be extended to other sensors with lower consumption, increasing very significantly the duration of the battery.

[1]  Anne-Claude Romain,et al.  Long term stability of metal oxide-based gas sensors for e-nose environmental applications: An overview , 2009 .

[2]  Andrey Somov,et al.  Optimization of power consumption for gas sensor nodes: A survey , 2015 .

[3]  Rajeev Piyare,et al.  On-Demand LoRa: Asynchronous TDMA for Energy Efficient and Low Latency Communication in IoT , 2018, Sensors.

[4]  Héctor Sánchez Santamaría,et al.  Gas sensor measurements during the initial action period of duty-cycling for power saving , 2017 .

[5]  Toshio Itoh,et al.  Selective Detection of Target Volatile Organic Compounds in Contaminated Humid Air Using a Sensor Array with Principal Component Analysis , 2017, Sensors.

[6]  Hyung Seok Kim,et al.  Adaptive Preheating Duration Control for Low-Power Ambient Air Quality Sensor Networks , 2014, Sensors.

[7]  Tommaso Addabbo,et al.  A low power IoT architecture for the monitoring of chemical emissions , 2019, ACTA IMEKO.

[8]  Santiago Marco,et al.  Low Power Operation of Temperature-Modulated Metal Oxide Semiconductor Gas Sensors , 2018, Sensors.

[9]  Juan Enrique Agudo,et al.  Improving Short Term Instability for Quantitative Analyses with Portable Electronic Noses , 2014, Sensors.

[10]  Saeid Minaei,et al.  Real-time aroma monitoring of mint (Mentha spicata L.) leaves during the drying process using electronic nose system , 2018, Measurement.

[11]  Roland J. Leigh,et al.  Practical Use of Metal Oxide Semiconductor Gas Sensors for Measuring Nitrogen Dioxide and Ozone in Urban Environments , 2017, Sensors.

[12]  K. Ihokura,et al.  The Stannic Oxide Gas SensorPrinciples and Applications , 1994 .

[13]  Rekha Jain,et al.  Wireless Sensor Network -A Survey , 2013 .

[14]  David Zhang,et al.  Temperature Modulated Gas Sensing E-Nose System for Low-Cost and Fast Detection , 2016, IEEE Sensors Journal.

[15]  Sarmistha Neogy,et al.  Building Wireless Sensor Networks: Theoretical and Practical Perspectives , 2015 .

[16]  Giuseppe Anastasi,et al.  Energy management in wireless sensor networks with energy-hungry sensors , 2009 .

[17]  Lachit Dutta,et al.  A Novel Low-Cost Hand-Held Tea Flavor Estimation System , 2018, IEEE Transactions on Industrial Electronics.

[18]  Carles Gomez,et al.  Bluetooth Mesh Energy Consumption: A Model , 2019, Sensors.

[19]  David E. Culler,et al.  System software techniques for low-power operation in wireless sensor networks , 2005, ICCAD-2005. IEEE/ACM International Conference on Computer-Aided Design, 2005..