Fault Diagnosis of Multimode Processes Based on Similarities

In this paper, a new large-scale process monitoring method based on knowledge mining is proposed. The contributions are as follows: 1) between-mode independent similarities are explored to reveal the between-mode relationship for multimode model development and online monitoring; 2) comprehensive subspace decomposition is performed in each mode regarding their relative similarities and influences on process monitoring; 3) each mode is separated into three different systematic subspaces and one residual subspace (RS) based on the between-mode similarities; and 4) different variations are modeled, respectively, for online monitoring to identify mode affiliation and detect the fault status. The proposed method is applied to fault detection of Tennessee Eastman process (TE Process). The monitoring results show the effectiveness of the proposed method, compared to the conventional monitoring method.

[1]  Zhiqiang Ge,et al.  Mixture Bayesian Regularization of PCR Model and Soft Sensing Application , 2015, IEEE Transactions on Industrial Electronics.

[2]  Iqbal Gondal,et al.  Vibration Spectrum Imaging: A Novel Bearing Fault Classification Approach , 2015, IEEE Transactions on Industrial Electronics.

[3]  Richard D. Braatz,et al.  Fault Detection and Diagnosis in Industrial Systems , 2001 .

[4]  Daniel Hissel,et al.  Diagnosis for PEMFC Systems: A Data-Driven Approach With the Capabilities of Online Adaptation and Novel Fault Detection , 2015, IEEE Transactions on Industrial Electronics.

[5]  Zhiqiang Ge,et al.  Multimode process monitoring based on Bayesian method , 2009 .

[6]  Arie Yeredor,et al.  Independent Component Analysis Over Galois Fields of Prime Order , 2011, IEEE Transactions on Information Theory.

[7]  Huijun Gao,et al.  Data-Based Techniques Focused on Modern Industry: An Overview , 2015, IEEE Transactions on Industrial Electronics.

[8]  H. Shi,et al.  Dynamic Multimode Process Modeling and Monitoring Using Adaptive Gaussian Mixture Models , 2012 .

[9]  Zhiming Li,et al.  Modeling and Monitoring of Dynamic Processes , 2012, IEEE Transactions on Neural Networks and Learning Systems.

[10]  Jialin Liu,et al.  Data‐driven fault detection and isolation for multimode processes , 2011 .

[11]  Age K. Smilde,et al.  Generalized contribution plots in multivariate statistical process monitoring , 2000 .

[12]  Xu Yang,et al.  Robust PLS approach for KPI-related prediction and diagnosis against outliers and missing data , 2014, Int. J. Syst. Sci..

[13]  Okyay Kaynak,et al.  Improved PLS Focused on Key-Performance-Indicator-Related Fault Diagnosis , 2015, IEEE Transactions on Industrial Electronics.

[14]  Manabu Kano,et al.  Evolution of multivariate statistical process control: application of independent component analysis and external analysis , 2004, Comput. Chem. Eng..

[15]  S. Joe Qin,et al.  Fault Detection of Nonlinear Processes Using Multiway Kernel Independent Component Analysis , 2007 .

[16]  Furong Gao,et al.  Mixture probabilistic PCR model for soft sensing of multimode processes , 2011 .

[17]  ChangKyoo Yoo,et al.  On-line monitoring of batch processes using multiway independent component analysis , 2004 .

[18]  Jie Yu.  A nonlinear kernel Gaussian mixture model based inferential monitoring approach for fault detection and diagnosis of chemical processes , 2012 .

[19]  ChangKyoo Yoo,et al.  Statistical process monitoring with independent component analysis , 2004 .

[20]  Jin Hyun Park,et al.  Process monitoring using a Gaussian mixture model via principal component analysis and discriminant analysis , 2004, Comput. Chem. Eng..

[21]  Fuli Wang,et al.  Multimode Process Monitoring Based on Mode Identification , 2012 .

[22]  Hong Zhou,et al.  Decentralized Fault Diagnosis of Large-Scale Processes Using Multiblock Kernel Partial Least Squares , 2010, IEEE Transactions on Industrial Informatics.

[23]  Jian Yang,et al.  Kernel ICA: An alternative formulation and its application to face recognition , 2005, Pattern Recognit..

[24]  ChangKyoo Yoo,et al.  Fault detection of batch processes using multiway kernel principal component analysis , 2004, Comput. Chem. Eng..

[25]  Yi Hu,et al.  A novel local neighborhood standardization strategy and its application in fault detection of multimode processes , 2012 .

[26]  Manabu Kano,et al.  Monitoring independent components for fault detection , 2003 .

[27]  X. Wang,et al.  Statistical Process Control Charts for Batch Operations Based on Independent Component Analysis , 2004 .

[28]  Nan Yang,et al.  Fault Isolation of Nonlinear Processes Based on Fault Directions and Features , 2014, IEEE Transactions on Control Systems Technology.

[29]  Yingwei Zhang,et al.  Enhanced statistical analysis of nonlinear processes using KPCA, KICA and SVM , 2009 .

[30]  Haihong Hu,et al.  Human Gait Recognition Based on Kernel Independent Component Analysis , 2007, 9th Biennial Conference of the Australian Pattern Recognition Society on Digital Image Computing Techniques and Applications (DICTA 2007).

[31]  Steven X. Ding,et al.  A Review on Basic Data-Driven Approaches for Industrial Process Monitoring , 2014, IEEE Transactions on Industrial Electronics.

[32]  In-Beum Lee,et al.  Fault detection and diagnosis based on modified independent component analysis , 2006 .

[33]  Yingwei Zhang,et al.  Modeling and Monitoring Between-Mode Transition of Multimodes Processes , 2013, IEEE Transactions on Industrial Informatics.

[34]  Torsten Jeinsch,et al.  Quality-Related Fault Detection in Industrial Multimode Dynamic Processes , 2014, IEEE Transactions on Industrial Electronics.

[35]  Yingwei Zhang,et al.  Monitoring of time-varying processes using kernel independent component analysis , 2013 .