Surface plasmon polaritons for micro and nano-texturing of metal surfaces

Surface Plasmon Polaritons (SPPs) have been known since the late 1950s with the work of Richie [1]. Today most research with these surface waves is aimed at production of subwavelength components in an attempt to merge the subjects of electronics and photonics on a nanometer scale. However, the features produced by SPPs could have uses in direct engineering applications due to their surface texturing capabilities, an area that is less exploited. The presented work is a demonstration of the production of SPP features by two picosecond pulsed fibre laser systems for the surface texturing of M42 High Speed Steel (HSS) (approximate composition by % wt; 1.1% C, 0.28% Mn, 0.4% Si, 3.88% Cr, 0.30%Max Ni, 9.5% Mo, 1.5% W, 1.15% V, 8.25% Co) and Ti-6Al-4V. Use of these laser systems allowed for the production of SPP patterns at high repetition rates (200kHz). Manipulation of the laser polarization allowed for the writing of features in a wide range of orientations allowing for greater control over the patterns produced. Writing, overwriting, erasing and rewriting of SPP features is demonstrated. The effect of these patterns on the water contact angle of HSS and Ti-6Al-4V was examined, and was found to reduce this value significantly in both cases.Surface Plasmon Polaritons (SPPs) have been known since the late 1950s with the work of Richie [1]. Today most research with these surface waves is aimed at production of subwavelength components in an attempt to merge the subjects of electronics and photonics on a nanometer scale. However, the features produced by SPPs could have uses in direct engineering applications due to their surface texturing capabilities, an area that is less exploited. The presented work is a demonstration of the production of SPP features by two picosecond pulsed fibre laser systems for the surface texturing of M42 High Speed Steel (HSS) (approximate composition by % wt; 1.1% C, 0.28% Mn, 0.4% Si, 3.88% Cr, 0.30%Max Ni, 9.5% Mo, 1.5% W, 1.15% V, 8.25% Co) and Ti-6Al-4V. Use of these laser systems allowed for the production of SPP patterns at high repetition rates (200kHz). Manipulation of the laser polarization allowed for the writing of features in a wide range of orientations allowing for greater control over the patterns pro...

[1]  Philippe M. Fauchet,et al.  Growth of spontaneous periodic surface structures on solids during laser illumination , 1982 .

[2]  John E. Sipe,et al.  Laser Induced Periodic Surface Structure , 1982 .

[3]  Peter G. Kazansky,et al.  ``Quill'' writing with ultrashort light pulses in transparent materials , 2007 .

[4]  Valerio Romano,et al.  Laser microstructuring of steel surfaces for tribological applications , 2000 .

[5]  I. Ursu,et al.  The Dependence of Linearly Polarized TEA-CO2 Laser Radiation Absorption on the Surface of a Metallic Sample on its Geometric Shape , 1986 .

[6]  I. Ursu,et al.  CO2‐laser radiation absorption by metal gratings , 1984 .

[7]  I. Ursu,et al.  High‐intensity laser irradiation of metallic surfaces covered by periodic structures , 1987 .

[8]  Izhak Etsion,et al.  Improving Tribological Performance of Mechanical Components by Laser Surface Texturing , 2004 .

[9]  R. H. Ritchie Plasma Losses by Fast Electrons in Thin Films , 1957 .

[10]  John E. Sipe,et al.  Laser-induced periodic surface structure. III. Fluence regimes, the role of feedback, and details of the induced topography in germanium , 1984 .

[11]  I. Etsion,et al.  Testing piston rings with partial laser surface texturing for friction reduction , 2006 .

[12]  Jeff F. Young,et al.  Laser-induced periodic surface structure. II. Experiments on Ge, Si, Al, and brass , 1983 .

[13]  Walter Perrie,et al.  Surface nanostructuring of Ni, Ti, and 316L stainless steel using ultrafast laser interactions , 2005, SPIE LASE.

[14]  I. Ursu,et al.  On the role of the periodical structures induced by powerful laser irradiation of metallic surfaces in the energy coupling process , 1985 .

[15]  Weijia Yang,et al.  Self-assembled periodic sub-wavelength structures by femtosecond laser direct writing. , 2006, Optics express.

[16]  R. Vajtai,et al.  Periodic nanostructures observed by STM on vanadium surface preilluminated with a cw Yag-laser , 1992 .

[17]  I. Etsion,et al.  Experimental Investigation of Partial Laser Surface Texturing for Piston-Ring Friction Reduction , 2005 .

[18]  Jeff F. Young,et al.  Laser-induced periodic surface structure. I. Theory , 1983 .

[19]  Oscar E. Martínez,et al.  Pulse distortions in tilted pulse schemes for ultrashort pulses , 1986 .

[20]  I. Ursu,et al.  Energy plasma-target coupling in the case a periodical structure is formed within the irradiation spot as an effect of powerful laser irradiation , 1985 .