Interface Intermixing in Type II InAs/GaInAsSb Quantum Wells Designed for Active Regions of Mid-Infrared-Emitting Interband Cascade Lasers

The effect of interface intermixing in W-design GaSb/AlSb/InAs/Ga0.665In0.335AsxSb1 − x/InAs/AlSb/GaSb quantum wells (QWs) has been investigated by means of optical spectroscopy supported by structural data and by band structure calculations. The fundamental optical transition has been detected at room temperature through photoluminescence and photoreflectance measurements and appeared to be blueshifted with increasing As content of the GaInAsSb layer, in contrast to the energy-gap-driven shifts calculated for an ideally rectangular QW profile. The arsenic incorporation into the hole-confining layer affects the material and optical structure also altering the InAs/GaInAsSb interfaces and their degree of intermixing. Based on the analysis of cross-sectional transmission electron microscopy images and energy-dispersive X-ray spectroscopy, we could deduce the composition distribution across the QW layers and hence simulate more realistic confinement potential profiles. For such smoothed interfaces that indicate As-enhanced intermixing, the energy level calculations have been able to reproduce the experimentally obtained trend.

[1]  Rui Q. Yang.  Infrared laser based on intersubband transitions in quantum wells , 1995 .

[2]  M. Kamp,et al.  Effect of arsenic on the optical properties of GaSb-based type II quantum wells with quaternary GaInAsSb layers , 2013 .

[3]  Habib Bouchriha,et al.  Infrared absorption in S i / S i 1 − x Ge x / Si quantum wells , 2001 .

[4]  K. Ryczko,et al.  Tailoring the effect of electric field in type II W-design InAs/GaInSb quantum well structures for emission up to 12 μm , 2015 .

[5]  Markus-Christian Amann,et al.  Room-temperature 3.73 µm GaSb-based type-I quantum-well lasers with quinternary barriers , 2012 .

[6]  K. Regiński,et al.  Blueshift of bandgap energy and reduction of non-radiative defect density due to precise control of InAs-on-GaSb interface in type-II InAs/GaSb superlattice , 2011 .

[7]  G. Sȩk,et al.  Effect of Annealing-Induced Interdiffusion on the Electronic Structure of Mid Infrared Emitting GaInAsSb/AlGaInAsSb Quantum Wells , 2011 .

[8]  G. Patriarche,et al.  Abrupt GaP/GaAs Interfaces in Self-Catalyzed Nanowires. , 2015, Nano letters.

[9]  S. Höfling,et al.  Optical properties of GaSb-based type II quantum wells as the active region of midinfrared interband cascade lasers for gas sensing applications , 2009 .

[10]  I. Vurgaftman,et al.  Rebalancing of internally generated carriers for mid-infrared interband cascade lasers with very low power consumption. , 2011, Nature communications.

[11]  Fred H. Pollak,et al.  Optical constants of Ga1−xInxAsySb1−y lattice matched to GaSb (001): Experiment and modeling , 2000 .

[12]  L. Nähle,et al.  Detection of acetylene impurities in ethylene and polyethylene manufacturing processes using tunable diode laser spectroscopy in the 3-μm range , 2011 .

[13]  Jerry R. Meyer,et al.  Type‐II quantum‐well lasers for the mid‐wavelength infrared , 1995 .

[14]  G. Sȩk,et al.  Fourier-transformed photoreflectance and fast differential reflectance of HgCdTe layers. The issues of spectral resolution and Fabry–Perot oscillations , 2011 .

[15]  L. Mawst,et al.  InGaAs/AlInAs strain-compensated Superlattices grown on metamorphic buffer layers for low-strain, 3.6 μm-emitting quantum-cascade-laser active regions , 2013 .

[16]  S. Höfling,et al.  Carrier loss mechanisms in type II quantum wells for the active region of GaSb-based mid-infrared interband cascade lasers , 2011 .

[17]  I. V. Mitchell,et al.  InGaAs/InP quantum well intermixing studied by cross-sectional scanning tunneling microscopy , 2001 .

[18]  A. Talneau,et al.  Bonding mechanism of a yttrium iron garnet film on Si without the use of an intermediate layer , 2014 .

[19]  Ksenia A. Fedorova,et al.  InAs/AlSb widely tunable external cavity quantum cascade laser around 3.2 μm , 2013 .

[20]  Wei Huang,et al.  Photoreflectance spectroscopy with a step-scan Fourier-transform infrared spectrometer: technique and applications. , 2007, The Review of scientific instruments.

[21]  Guojun Zhang,et al.  Suppression of dislocations by Sb spray in the vicinity of InAs/GaAs quantum dots , 2014, Nanoscale Research Letters.

[22]  S. Höfling,et al.  Type II quantum wells on GaSb substrate designed for laser-based gas sensing applications in a broad range of mid infrared , 2012 .

[23]  B. Murdin,et al.  A new Fourier transform photo‐modulation spectroscopic technique for narrow band‐gap materials in the mid‐ to far‐infra‐red , 2005 .

[24]  Sven Höfling,et al.  Increasing the optical transition oscillator strength in GaSb-based type II quantum wells , 2012 .

[25]  O'Reilly,et al.  Evaluation of various approximations used in the envelope-function method. , 1994, Physical review. B, Condensed matter.

[26]  G. Sȩk,et al.  Band Offsets and Photoluminescence Thermal Quenching in Mid-Infrared Emitting GaInAsSb Quantum Wells with Quinary AlGaInAsSb Barriers , 2010 .

[27]  T. Nilsen,et al.  Critical thickness of MBE-grown Ga1−xInxSb (x<0.2) on GaSb , 2009 .

[28]  J. Misiewicz,et al.  Eight-band k·p modeling of InAs/InGaAsSb type-II W-design quantum well structures for interband cascade lasers emitting in a broad range of mid infrared , 2013 .

[29]  M. Kamp,et al.  Verification of band offsets and electron effective masses in GaAsN/GaAs quantum wells: Spectroscopic experiment versus 10-band k·p modeling , 2013 .