Deteriorated corrosion performance of micro-alloyed Mg-Zn alloy after heat treatment and mechanical processing

[1]  Yiming Jin,et al.  Microstructure-corrosion behaviour relationship of micro-alloyed Mg-0.5Zn alloy with the addition of Ca, Sr, Ag, In and Cu , 2020 .

[2]  D. Snihirova,et al.  Corrosion and discharge properties of Ca/Ge micro-alloyed Mg anodes for primary aqueous Mg batteries , 2020 .

[3]  Fu-hui Wang,et al.  Active protection of Mg alloy by composite PEO coating loaded with corrosion inhibitors , 2020, Applied Surface Science.

[4]  Byeong-Chan Suh,et al.  The Corrosion Behavior of High Purity Mg According to Process History , 2020, Magnesium Technology 2020.

[5]  Yiming Jin,et al.  Time-sequential corrosion behaviour observation of micro-alloyed Mg-0.5Zn-0.2Ca alloy via a quasi-in situ approach , 2019, Corrosion Science.

[6]  D. Tolnai,et al.  Influences of Al and high shearing dispersion technique on the microstructure and creep resistance of Mg-2.85Nd-0.92Gd-0.41Zr-0.29Zn alloy , 2019, Materials Science and Engineering: A.

[7]  Liguo Wang,et al.  Microstructure, mechanical properties and deformation mechanisms of an as-cast Mg–Zn–Y–Nd–Zr alloy for stent applications , 2019, Journal of Materials Science & Technology.

[8]  Hua-nan Liu,et al.  Preparation of a single-phase Mg–6Zn alloy via ECAP-stimulated solution treatment , 2019, Journal of Magnesium and Alloys.

[9]  Y. Huang,et al.  Effects of Zr Addition on Thermodynamic and Kinetic Properties of Liquid Mg-6Zn-xZr Alloys , 2019, Metals.

[10]  B. Liu,et al.  Influence of surface pretreatment on phosphate conversion coating on AZ91 Mg alloy , 2019, Surface and Coatings Technology.

[11]  M. Easton,et al.  Recent advances in biodegradation controls over Mg alloys for bone fracture management: A review , 2019, Journal of Materials Science & Technology.

[12]  T. Ebel,et al.  The Effect of Surface Treatments on the Degradation of Biomedical Mg Alloys—A Review Paper , 2018, Materials.

[13]  Xiaobo Chen,et al.  Corrosion Types of Magnesium Alloys , 2018, Magnesium Alloys - Selected Issue.

[14]  G. Thompson,et al.  Effect of iron content on the corrosion of pure magnesium: Critical factor for iron tolerance limit , 2018, Corrosion Science.

[15]  Yujuan Wu,et al.  Quasi-in-situ STEM-EDS insight into the role of Ag in the corrosion behaviour of Mg-Gd-Zr alloys , 2018 .

[16]  Sung Hyuk Park,et al.  Influence of Intermetallic Particles on the Corrosion Properties of Extruded ZK60 Mg Alloy Containing Cu , 2018 .

[17]  S. Lamaka,et al.  Comprehensive screening of Mg corrosion inhibitors , 2017 .

[18]  N. Birbilis,et al.  Fundamentals and advances in magnesium alloy corrosion , 2017 .

[19]  Yuansheng Yang,et al.  Microstructure and corrosion resistance of directionally solidified Mg-2 wt.% Zn alloy , 2017 .

[20]  Jie Luo,et al.  Effects of Zn concentration and heat treatment on the microstructure, mechanical properties and corrosion behavior of as-extruded Mg-Zn alloys produced by powder metallurgy , 2017 .

[21]  D. Shan,et al.  Characterization of Filiform Corrosion of Mg-3Zn Mg Alloy , 2017 .

[22]  M. Zheludkevich,et al.  Plasma electrolytic oxidation coatings with particle additions – A review , 2016 .

[23]  Yan Li,et al.  In vitro and in vivo corrosion and histocompatibility of pure Mg and a Mg-6Zn alloy as urinary implants in rat model. , 2016, Materials science & engineering. C, Materials for biological applications.

[24]  James F Curtin,et al.  Biodegradable magnesium alloys for orthopaedic applications: A review on corrosion, biocompatibility and surface modifications. , 2016, Materials science & engineering. C, Materials for biological applications.

[25]  G. Song,et al.  Corrosion and passivation of magnesium alloys , 2016 .

[26]  Tingting Liu,et al.  A novel approach to melt purification of magnesium alloys , 2016 .

[27]  E. Aghion,et al.  Influence of Heat Treatment Temperature on Corrosion Characteristics of Biodegradable EW10X04 Mg Alloy Coated with Nd , 2016 .

[28]  Zi-kui Liu,et al.  Diffusion coefficients of alloying elements in dilute Mg alloys: A comprehensive first-principles study , 2016 .

[29]  M. Kannan,et al.  Influence of zinc on the microstructure, mechanical properties and in vitro corrosion behavior of magnesium–zinc binary alloys , 2015 .

[30]  P. Uggowitzer,et al.  Influence of trace impurities on the in vitro and in vivo degradation of biodegradable Mg-5Zn-0.3Ca alloys. , 2015, Acta biomaterialia.

[31]  H. Jafari,et al.  Effect of solution treatment on corrosion characteristics of biodegradable Mg-6Zn alloy , 2015 .

[32]  F. Pan,et al.  Preparation and characterization of as-extruded Mg–Sn alloys for orthopedic applications , 2015 .

[33]  N. Birbilis,et al.  Corrosion of magnesium alloys: the role of alloying , 2015 .

[34]  M. Dargusch,et al.  Review of Recent Developments in the Field of Magnesium Corrosion , 2015 .

[35]  Jörg F. Löffler,et al.  Assessing the degradation performance of ultrahigh-purity magnesium in vitro and in vivo , 2015 .

[36]  J. Robson,et al.  Effect of traces of silicon on the formation of Fe-rich particles in pure magnesium and the corrosion susceptibility of magnesium , 2015 .

[37]  Z. Fan,et al.  The role of intermetallics on the corrosion initiation of twin roll cast AZ31 Mg alloy , 2015 .

[38]  M. Medraj,et al.  Effect of heat treatment on the microstructure and corrosion behaviour of Mg–Zn alloys , 2014 .

[39]  Ming Liu,et al.  Impurity control and corrosion resistance of magnesium-aluminum alloy , 2013 .

[40]  G. Song,et al.  Corrosion behaviour in salt spray and in 3.5% NaCl solution saturated with Mg(OH)2 of as-cast and solution heat-treated binary Mg–X alloys: X = Mn, Sn, Ca, Zn, Al, Zr, Si, Sr , 2013 .

[41]  G. Song,et al.  Corrosion of ultra-high-purity Mg in 3.5% NaCl solution saturated with Mg(OH)2 , 2013 .

[42]  Yufeng Zheng,et al.  Novel Magnesium Alloys Developed for Biomedical Application: A Review , 2013 .

[43]  H. Matsubara,et al.  Effect of impurity Fe on corrosion behavior of AM50 and AM60 magnesium alloys , 2013 .

[44]  E. Han,et al.  The effect of Zn concentration on the corrosion behavior of Mg-xZn alloys , 2012 .

[45]  Dong-Ik Kim,et al.  Preferred crystallographic pitting corrosion of pure magnesium in Hanks’ solution , 2012 .

[46]  A. Atrens,et al.  Corrosion behaviour of a nominally high purity Mg ingot produced by permanent mould direct chill casting , 2012 .

[47]  P. Uggowitzer,et al.  Production of High Purity Magnesium Alloys by Melt Purification with Zr , 2012 .

[48]  E. Han,et al.  The role of second phases in the corrosion behavior of Mg–5Zn alloy , 2012 .

[49]  N. Birbilis,et al.  Enhanced corrosion resistance of Mg alloy ZK60 after processing by integrated extrusion and equal channel angular pressing , 2011 .

[50]  Z. Fan,et al.  Microstructure and mechanical properties of as-cast and heat treated Mg-15Gd-3Y alloy , 2011 .

[51]  E. Han,et al.  Effects of heat treatment on corrosion behaviors of Mg-3Zn magnesium alloy , 2010 .

[52]  C. Xie,et al.  Influence of Heat Treatments on In Vitro Degradation Behavior of Mg‐6Zn Alloy Studied by Electrochemical Measurements , 2010 .

[53]  Yingwei Song,et al.  Effect of second phases on the corrosion behaviour of wrought Mg-Zn-Y-Zr alloy , 2010 .

[54]  Yang Song,et al.  Research on an Mg-Zn alloy as a degradable biomaterial. , 2010, Acta biomaterialia.

[55]  Yu‐Chan Kim,et al.  Effects of impurities on the biodegradation behavior of pure magnesium , 2009 .

[56]  C. Xie,et al.  In vitro degradation, hemolysis and MC3T3-E1 cell adhesion of biodegradable Mg–Zn alloy , 2009 .

[57]  M. Liu,et al.  Calculated phase diagrams and the corrosion of die-cast Mg–Al alloys , 2009 .

[58]  Yufeng Zheng,et al.  The development of binary Mg-Ca alloys for use as biodegradable materials within bone. , 2008, Biomaterials.

[59]  D. Thierry,et al.  Corrosion product formation during NaCl induced atmospheric corrosion of magnesium alloy AZ91D , 2007 .

[60]  D. Eliezer,et al.  The role of Si and Ca on new wrought Mg–Zn–Mn based alloy , 2007 .

[61]  G. Song,et al.  Corrosion resistance of anodised single-phase Mg alloys , 2006 .

[62]  J. Duszczyk,et al.  Volta potential of second phase particles in extruded AZ80 magnesium alloy , 2006 .

[63]  K. Kainer,et al.  Metallographische Gefügeuntersuchungen von Magnesiumlegierungen / The Metallographical Examination of Magnesium Alloys , 2004 .

[64]  R. Lillard.  Relationships Between Metal-Metal Bonding and Crystallographic Pitting in hcp Metals , 2003 .

[65]  Shenyang,et al.  MODELS OF ACTIVITY AND ACTIVITY INTERACTION PARAMETER IN TERNARY METALLIC MELT , 1994 .

[66]  A. Miedema,et al.  Cohesion in alloys — fundamentals of a semi-empirical model , 1980 .

[67]  J. Hanawalt.  Corrosion studies of magnesium and its alloys , 1942 .