Direct train-to-train communications at low UHF frequencies
暂无分享,去创建一个
[1] Cheng Tao,et al. Position-Based Modeling for Wireless Channel on High-Speed Railway under a Viaduct at 2.35 GHz , 2012, IEEE Journal on Selected Areas in Communications.
[2] Gorazd Kandus,et al. Four-slope channel model for path loss prediction in tunnels at 400 MHz , 2010 .
[3] Zhangdui Zhong,et al. A Novel Train-to-Train Communication Model Design Based on Multihop in High-Speed Railway , 2012 .
[4] Andreas F. Molisch,et al. Measurements and Analysis of Propagation Channels in High-Speed Railway Viaducts , 2013, IEEE Transactions on Wireless Communications.
[5] Bo Ai,et al. Propagation measurements and analysis for high-speed railway cutting scenario , 2011 .
[6] Tao Tang,et al. Measurements and Analysis of Large-Scale Fading Characteristics in Curved Subway Tunnels at 920 MHz, 2400 MHz, and 5705 MHz , 2015, IEEE Transactions on Intelligent Transportation Systems.
[7] Pingzhi Fan,et al. Channel Measurements and Models for High-Speed Train Communication Systems: A Survey , 2016, IEEE Communications Surveys & Tutorials.
[8] Bo Ai,et al. An Empirical Path Loss Model and Fading Analysis for High-Speed Railway Viaduct Scenarios , 2011, IEEE Antennas and Wireless Propagation Letters.
[9] Aleksander Sniady,et al. LTE for Railways: Impact on Performance of ETCS Railway Signaling , 2014, IEEE Vehicular Technology Magazine.
[10] Andreas Lehner,et al. On the Performance of TETRA DMO Short Data Service in Railway VANETs , 2013, Wirel. Pers. Commun..
[11] Tung-Sang Ng,et al. Measurements of the propagation of UHF radio waves on an underground railway train , 2000, IEEE Trans. Veh. Technol..
[12] Bo Ai,et al. Propagation Measurements and Analysis for Train Stations of High-Speed Railway at 930 MHz , 2014, IEEE Transactions on Vehicular Technology.