Limiting-case Analysis of Continuum Trunk Kinematics

Continuum robotic manipulators, termed trunks, mimic the astounding capabilities of elephant trunks and octopus arms by bending in smooth arcs. Several approaches to kinematic analysis of continuum trunks complement a wide variety of available continuum robots. However, these kinematics exhibit singularity-like conditions when the trunk assumes a straight posture, which is essential to complete many tasks. The novel limiting-case analysis presented in this paper eliminates these problems, demonstrating that the unique causes of the problem are rooted in the continuum formulation and cannot be solved by traditional rigid-link singularity analysis. Three practical examples demonstrate the necessity of this analysis presented, enabling the trunk to successfully perform each task.

[1]  Nabil Simaan,et al.  Snake-Like Units Using Flexible Backbones and Actuation Redundancy for Enhanced Miniaturization , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[2]  Ian D. Walker,et al.  Dynamic Modelling for Planar Extensible Continuum Robot Manipulators , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[3]  Ian D. Walker,et al.  Large deflection dynamics and control for planar continuum robots , 2001 .

[4]  Ian D. Walker,et al.  Kinematics and the Implementation of an Elephant's Trunk Manipulator and Other Continuum Style Robots , 2003, J. Field Robotics.

[5]  Yacine Amirat,et al.  Modeling and Control of a Hybrid Continuum Active Catheter for Aortic Aneurysm Treatment , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[6]  Takeshi Aoki,et al.  Study on slime robot: development of the mobile robot prototype model using bridle bellows , 2004, IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.

[7]  H. Tanaka,et al.  Applying a flexible microactuator to robotic mechanisms , 1992, IEEE Control Systems.

[8]  Guido D. Salvucci,et al.  Ieee standard for binary floating-point arithmetic , 1985 .

[9]  Rob Buckingham,et al.  Snake arm robots , 2002 .

[10]  Ian D. Walker,et al.  Kinematics for multisection continuum robots , 2006, IEEE Transactions on Robotics.

[11]  J. Bruce C. Davies,et al.  Continuum robots - a state of the art , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[12]  Gregory S. Chirikjian,et al.  A modal approach to hyper-redundant manipulator kinematics , 1994, IEEE Trans. Robotics Autom..

[13]  Jean-Arcady Meyer,et al.  Biologically Inspired Robots , 2008, Springer Handbook of Robotics.

[14]  Nirvana Popescu,et al.  A Variable Length Tentacle Manipulator Control System , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[15]  Guillaume Thomann,et al.  The development of a bendable colonoscopic tip , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).