Stationary transducer response to planetary-gear vibration excitation with non-uniform planet loading

A relatively simple first-principles mathematical model of a generic planetary gear system is developed. System imperfections included are planet-to-planet variability in planet/ring-gear loading and generic ring-gear imperfections. General formulas for Fourier-series spectrum contributions of fixed-transducer responses to transmission-error vibratory excitations caused by planet/ring-gear tooth-meshing harmonics and ring-gear imperfections are derived, which include predicted effects caused by planet-to-planet variability in planet/ring-gear loading. Good approximations to the coefficient of variation of planet loading (CVPL) are shown to be readily obtainable from measured planet-carrier rotational-harmonic spectra obtained by fixed transducers. The predicted spectrum behavior is compared with fixed-accelerometer response spectra measured from UH-60A planetary systems without and with planet-loading variability caused by a cracked planet-carrier plate. The main features of predicted and measured spectra are in good agreement.

[1]  G. Vachtsevanos,et al.  A Helicopter Planetary Gear Plate Crack Analysis and Feature Extraction Based on Ground and Aircraft Data , 2005, Proceedings of the 2005 IEEE International Symposium on, Mediterrean Conference on Control and Automation Intelligent Control, 2005..

[2]  P D McFadden,et al.  An Explanation for the Asymmetry of the Modulation Sidebands about the Tooth Meshing Frequency in Epicyclic Gear Vibration , 1985 .

[3]  Abhinav Saxena,et al.  A methodology for analyzing vibration data from planetary gear systems using complex Morlet wavelets , 2005, Proceedings of the 2005, American Control Conference, 2005..

[4]  James McNames,et al.  Fourier Series Analysis of Epicyclic Gearbox Vibration , 2002 .

[5]  Hines,et al.  Effects of Time-Synchronous Averaging Implementations on HUMS Features for UH-60A Planetary Carrier Cracking , 2005 .

[6]  P. D. McFadden,et al.  A technique for calculating the time domain averages of the vibration of the individual planet gears and the sun gear in an epicyclic gearbox , 1991 .

[7]  Andrew,et al.  A USN Strategy for Mechanical and Propulsion Systems Prognostics with Demonstration Results , 2002 .

[8]  Marianne Mosher.  Results From a New Separation Algorithm for Planetary Gear System Vibration Measurements , 2005 .

[9]  Cyril M. Harris,et al.  Handbook of Acoustical Measurements and Noise Control, 3rd edition , 1993 .

[10]  Ian Howard,et al.  The Detection of Seeded Faults in an Epicyclic Gearbox by Signal Averaging of the Vibration , 1990 .

[11]  Jonathan A. Keller,et al.  Detection of a fatigue crack in a UH-60A planet gear carrier using vibration analysis , 2006 .

[12]  S. L. Harris,et al.  Dynamic Loads on the Teeth of Spur Gears , 1958 .

[13]  W. D. Mark.  Analysis of the vibratory excitation of gear systems. II - Tooth error representations, approximations, and application , 1979 .

[14]  F. B. Hildebrand,et al.  Methods of Applied Mathematics , 1966 .

[15]  Darryll J. Pines,et al.  Vibration separation methodology for planetary gear health monitoring , 2000, Smart Structures.

[16]  Marianne Mosher.  Understanding Vibration Spectra of Planetary Gear Systems for Fault Detection , 2003 .

[17]  Emanuel Parzen,et al.  Modern Probability Theory And Its Applications , 1962 .

[18]  Eugen J. Skudrzyk,et al.  Simple and Complex Vibratory Systems , 1969 .

[19]  P. Lewis,et al.  The finite Fourier transform , 1969 .

[20]  W. D. Mark.  Analysis of the vibratory excitation of gear systems: Basic theory , 1978 .

[21]  Herbert Kolsky,et al.  Stress Waves in Solids , 2003 .