In situ processing and aging behaviour of an aluminium/Al2O3 composite

Abstract Reactive sintering involving a displacement reaction between aluminium and CuO powders was applied to fabricate an aluminium based composite. The two powders were mixed in a ball mill and uniaxially pressed before sintering in nitrogen atmosphere at 900 °C. During sintering a displacement reaction between CuO and aluminium occurred, which resulted in in situ synthesis of alumina particles. Differential thermal analysis (DTA), X-ray diffractometry (XRD), optical and scanning electron microscopies were used to investigate the phase and microstructural changes taking place during processing of the composite. Results revealed that no chemical reaction occurred during ball milling and Al2O3 phase developed in two stages during sintering of the compact. Below 700 °C, amorphous alumina formed which transformed to crystalline alumina at higher temperature. Aging response of the composite was examined as a function of time in temperature range of 180–220 °C. Composite attained a peak hardness value of 133 Hv after 4 h of aging at 200 °C.

[1]  W. Kaplan,et al.  Microstructure of alumina composites containing niobium and niobium aluminides , 2004 .

[2]  Q. Jiang,et al.  Development of aluminium composites with in situ formed AlTiSi reinforcements through infiltration , 2007 .

[3]  R. Arsenault,et al.  Microstructure of fiber and particulate SiC in 6061 Al composites , 1983 .

[4]  Zhengang Zhu,et al.  On the chemical reactions to process particle reinforced Al–Cu alloy matrix composites , 1998 .

[5]  V. Phillips.  High resolution electron microscope observations on precipitation in Al-3.0% Cu alloy , 1975 .

[6]  Deliang Zhang,et al.  Microstructural evolution during combustion reaction between CuO and Al induced by high energy ball milling , 1999 .

[7]  Minoru Taya,et al.  Dislocations punched-out around a short fiber in a short fiber metal matrix composite subjected to uniform temperature change , 1987 .

[8]  J. Elíasson,et al.  Applications of Aluminium Matrix Composites , 1995 .

[9]  B. S. Rao,et al.  Microstructural development in the directed melt-oxidized (DIMOX) Al-Mg-Si alloys , 1995 .

[10]  Y. Mai,et al.  Effect of ceramic reinforcement on the ageing behaviour of an aluminium alloy , 1993 .

[11]  M. Y. Yau,et al.  Formation of nanostructured eutectic network in α-Al2O3 reinforced Al–Cu alloy matrix composite , 2003 .

[12]  T. Sheppard,et al.  Structural changes occurring during thermal treatments during extrusion of Al–Cu–Mg–Mn–Si (AA 2014) alloy , 1982 .

[13]  P. McCormick,et al.  Mechanochemical Reduction of V2O5 , 1994 .

[14]  D. Lloyd,et al.  Microstructural aspects of aluminium-silicon carbide particulate composites produced by a casting method , 1989 .

[15]  J. Duszczyk,et al.  Aging response of an AA2014-based composite prepared from an elemental powder mixture , 1999 .

[16]  R. Subramanian,et al.  Synthesis of iron aluminide-Al2O3 composites by in-situ displacement reactions , 1997 .

[17]  R. J. Arsenault,et al.  Anin situ HVEM study of dislocation generation at Al/SiC interfaces in metal matrix composites , 1986 .

[18]  Pradeep K. Rohatgi,et al.  Solidification, structures, and properties of cast metal-ceramic particle composites , 1986 .

[19]  Farghalli A. Mohamed,et al.  Particulate reinforced metal matrix composites — a review , 1991, Journal of Materials Science.

[20]  M. Y. Yau,et al.  Formation of Al2Cu and AlCu intermetallics in Al(Cu) alloy matrix composites by reaction sintering , 2004 .

[21]  M. K. Premkumar,et al.  Emerging technologies for the in-situ production of MMCs , 1993 .

[22]  Di Zhang,et al.  Fabrication of in situ Al2O3/Al composite via remelting , 2003 .

[23]  B. Niroumand,et al.  Synthesis of In-situ Aluminum Matrix Composite Using a New Activated Powder Injection Method , 2008 .