Inception of Macroscopic Shear Bands During Hot Working of Aluminum Alloys

[1]  I. Samajdar,et al.  Study of grain boundary orientation gradients through combined experiments and strain gradient crystal plasticity modeling , 2022, International Journal of Plasticity.

[2]  C. V. Singh,et al.  Mechanistic Origin of Orientation-Dependent Substructure Evolution in Aluminum and Aluminum-Magnesium Alloys , 2022, Metallurgical and Materials Transactions A.

[3]  Shenyang Hu,et al.  Effect of loading path on grain misorientation and geometrically necessary dislocation density in polycrystalline aluminum under reciprocating shear , 2022, Computational Materials Science.

[4]  O. Hopperstad,et al.  Dynamic strain ageing in an AlMg alloy at different strain rates and temperatures: experiments and constitutive modelling , 2022, International Journal of Plasticity.

[5]  R. Bjørge,et al.  Prominent role of multi-scale microstructural heterogeneities on superplastic deformation of a high solid solution Al–7Mg alloy , 2021, International Journal of Plasticity.

[6]  S. Murty,et al.  Slip band formation in low and high solute aluminum: a combined experimental and modeling study , 2021, Modelling and Simulation in Materials Science and Engineering.

[7]  J. Lloyd,et al.  Incipient dynamic recrystallization and adiabatic shear bands in Ti–7Al studied via in situ X-ray diffraction , 2021 .

[8]  G. Pharr,et al.  Measurement of hardness and elastic modulus by load and depth sensing indentation: Improvements to the technique based on continuous stiffness measurement , 2021, Journal of Materials Research.

[9]  D. Fullwood,et al.  The role of crystallographic orientations on heterogeneous deformation in a zirconium alloy: A combined experimental and modeling study , 2020 .

[10]  P. Manach,et al.  A persistent modal plastic model for instabilities in Al–Mg alloys with 1D application , 2020 .

[11]  M. Preuss,et al.  A statistical study of the relationship between plastic strain and lattice misorientation on the surface of a deformed Ni-based superalloy , 2020, Acta Materialia.

[12]  Shengxin Zhu,et al.  Dynamic failure of titanium: Temperature rise and adiabatic shear band formation , 2020 .

[13]  W. Oliver,et al.  Critical examination of experimental data on strain bursts (pop-in) during spherical indentation , 2020, Journal of Materials Research.

[14]  C. Hutchinson,et al.  Microstructural Origin of Residual Stress Relief in Aluminum , 2019, Metallurgical and Materials Transactions A.

[15]  O. Türkoğlu,et al.  In situ investigation of strain heterogeneity and microstructural shear bands in rolled Magnesium AZ31 , 2019, International Journal of Plasticity.

[16]  W. Oliver,et al.  A critical assessment of the effect of indentation spacing on the measurement of hardness and modulus using instrumented indentation testing , 2019, Materials & Design.

[17]  D. Fang,et al.  Temperature Rise Associated with Adiabatic Shear Band: Causality Clarified. , 2019, Physical review letters.

[18]  B. Tang,et al.  The Formation and Evolution of Shear Bands in Plane Strain Compressed Nickel-Base Superalloy , 2018 .

[19]  R. Kaibyshev,et al.  Effect of Microstructure on Continuous Propagation of the Portevin–Le Chatelier Deformation Bands , 2017 .

[20]  C. Hutchinson,et al.  Relating Residual Stress and Substructural Evolution During Tensile Deformation of an Aluminum-Manganese Alloy , 2017, Metallurgical and Materials Transactions A.

[21]  I. Samajdar,et al.  Temperature dependence of work hardening in sparsely twinning zirconium , 2017 .

[22]  K. Narasimhan,et al.  Forming limit curves in low-carbon steels: improved prediction by incorporating microstructural evolution , 2016 .

[23]  J. Driver,et al.  Mechanism of macroscopic shear band formation in plane strain compressed fine-grained aluminium , 2015 .

[24]  C. C. Aydiner,et al.  Multiscale deformation heterogeneity in twinning magnesium investigated with in situ image correlation , 2014 .

[25]  I. Samajdar,et al.  Orientation Dependent Recovery in Interstitial Free Steel , 2012 .

[26]  F. Roters,et al.  Orientation dependence of shear banding in face-centered-cubic single crystals , 2012 .

[27]  M. Kazeminezhad,et al.  Hot deformation behavior of hot extruded Al–6Mg alloy , 2012 .

[28]  Yanfei Gao,et al.  Indentation Schmid factor and orientation dependence of nanoindentation pop-in behavior of NiAl single crystals , 2011 .

[29]  P. Houtte,et al.  Strain Mode Dependence of Deformation Texture Developments: Microstructural Origin , 2011 .

[30]  E. Palmiere,et al.  Measurement of flow stress in hot plane strain compression tests , 2006 .

[31]  B. Verlinden,et al.  On Crystallographic Texture of As-Drawn Doped-W Wires , 2005 .

[32]  A. Ngan,et al.  Indentation strain burst phenomenon induced by grain boundaries in niobium , 2004 .

[33]  J. Jonas,et al.  Initiation of Dynamic Recrystallization in Constant Strain Rate Hot Deformation , 2003 .

[34]  E. Romhanji,et al.  The effect of temperature on strain-rate sensitivity in high strength Al–Mg alloy sheet , 2002 .

[35]  Dierk Raabe,et al.  Micromechanical and macromechanical effects in grain scale polycrystal plasticity experimentation and simulation , 2001 .

[36]  P. Withers,et al.  Residual stress. Part 1 – Measurement techniques , 2001 .

[37]  E. B. Hawbolt,et al.  Modeling recovery and recrystallization kinetics in cold-rolled Ti-Nb stabilized interstitial-free steel , 1996 .

[38]  O. Engler,et al.  Formation of Cu-type shear bands and their influence on deformation and texture of rolled f.c.c. {112}〈111〉 single crystals , 1995 .

[39]  P. Houtte,et al.  The influence of crystallographic texture on diffraction measurements of residual stress , 1993 .

[40]  A. Korbel.  The model of microshear banding in metals , 1990 .

[41]  R. Asaro,et al.  Shear band formation in plane strain compression , 1988 .

[42]  A. Needleman.  Continuum mechanics studies of plastic instabilities , 1988 .

[43]  Y. Estrin,et al.  Local strain hardening and nonuniformity of plastic deformation , 1986 .

[44]  A. Korbel,et al.  Microscopic versus macroscopic aspect of shear bands deformation , 1986 .

[45]  J. Embury,et al.  Microstructural aspects of strain localization in AlMg alloys , 1986 .

[46]  S. Semiatin,et al.  The occurrence of shear bands in isothermal, hot forging , 1982 .

[47]  S. Semiatin,et al.  Deformation and unstable flow in hot forging of Ti-6Ai-2Sn-4Zr-2Mo-0.1Si , 1981 .

[48]  I. Dillamore,et al.  Occurrence of shear bands in heavily rolled cubic metals , 1979 .

[49]  J. Jonas,et al.  Plastic stability in tension and compression , 1976 .

[50]  W. A. Backofen,et al.  Mechanical contributions to the plane-strain deformation and recrystallization textures of aluminum-killed steel , 1973 .

[51]  E. W. Hart.  Theory of the tensile test , 1967 .

[52]  A. P. Green.  XCII. A theoretical investigation of the compression of a ductile material between smooth flat dies , 1951 .

[53]  S. Mahesh.  A binary-tree based model for rate-independent polycrystals , 2010 .

[54]  John Lambros,et al.  Multiscale strain measurements of plastically deforming polycrystalline titanium: Role of deformation heterogeneities , 2010 .

[55]  John J. Jonas,et al.  A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization , 1996 .

[56]  W. Reimers,et al.  Procedures for Residual Stress Analysis in Textured and in Coarse Grained Materials , 1995 .

[57]  S. I. Oh,et al.  The Occurrence of Shear Bands in Metalworking , 1983 .

[58]  R. Asaro,et al.  An experimental study of shear localization in aluminum-copper single crystals , 1981 .

[59]  J. Jonas,et al.  Recovery and Recrystallization during High Temperature Deformation , 1975 .

[60]  W. A. Backofen.  Deformation processing , 1973 .

[61]  R. Hill.  The mathematical theory of plasticity , 1950 .