Speed control of 3-mass system with sliding mode control and CMAC

This work deals with a design scheme of the speed control for a 3-mass system, which has a hybrid structure of a sliding mode controller and a cerebellar model articulation controller (CMAC). The nonlinear control part in the sliding mode controller is firstly designed, and then a real-coded genetic algorithm is utilized to optimize the output from the sliding mode controller. The CMAC compensates the sliding mode controller so that the control performance is improved well. The behavior of the newly proposed control scheme is experimentally examined in comparison with using only the sliding mode controller.

[1]  Shinji Wakui,et al.  Trajectory Control of Robot Arm Using Sliding Mode Control and Experimented Results , 1989 .

[2]  Junji Furusho,et al.  A Consideration on Inertia-Ratio and Vibration Control of Two-Inertia System , 2003 .

[3]  Katsuhisa Furuta,et al.  Design of sliding mode control systems with constrained inputs , 1996, Proceedings of 35th IEEE Conference on Decision and Control.

[4]  Toru Yamamoto,et al.  Robust PD Sway Control of a Lifted Load for a Crane Using a Genetic Algorithm , 2003 .

[5]  Sarah K. Spurgeon,et al.  Sliding Mode Control , 1998 .

[6]  James S. Albus,et al.  Data Storage in the Cerebellar Model Articulation Controller (CMAC) , 1975 .

[7]  James S. Albus,et al.  New Approach to Manipulator Control: The Cerebellar Model Articulation Controller (CMAC)1 , 1975 .

[8]  Toru Yamamoto,et al.  A Design of PID Controllers Using a Genetic Algorithm , 1999 .

[9]  Toru Yamamoto,et al.  A Design of Self-Tuning PID Controllers Fused with a Neural Network , 1998 .

[10]  Guoguang Zhang,et al.  Control of Three-inertia System by PI/PID Control , 1999 .

[11]  Isao Ono,et al.  Global and multi-objective optimization for lens design by real-coded genetic algorithms , 1998, Other Conferences.

[12]  Takayuki Suzuki,et al.  Disturbance Suppression of Two-mass Positioning System with Small Inertia Ratio under Two-degree of Freedom Controller , 2000 .

[13]  Shigenobu Kobayashi,et al.  Multi-Parental Extension of the Unimodal Normal Distribution Crossover for Real-Coded Genetic Algorithms , 2000 .

[14]  Yoshihiro Ohnishi,et al.  A Design of Self-Tuning PID Control Systems Based on Pole-Assignment Method , 2003 .

[15]  Toru Yamamoto,et al.  Path Tracking Control by Online Learning using CMAC for an Omnidirectional Mobile Robots , 2002 .

[16]  Masahiro Kaneda,et al.  A design of self-tuning PID controllers using a genetic algorithm , 1999, Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251).

[17]  Yoshihiro Matsui,et al.  Design of Controller for Three-Inertia Benchmark Problem Using PID Controller , 1999 .

[18]  James S. Albus,et al.  I A New Approach to Manipulator Control: The I Cerebellar Model Articulation Controller , 1975 .

[19]  Nobuyuki Matsui,et al.  Genetic Algorithms-Based Design of Vibration Suppression Compensator for 2-Mass Resonant System , 2000 .

[20]  Yoshihiro Matsui.  Speed Control of 2-Mass System by PID Controller , 1996 .