Removal of ammonium from municipal wastewater with powdered and granulated metakaolin geopolymer

ABSTRACT Ammonium removal from municipal wastewater poses challenges with the commonly used biological processes. Especially at low wastewater temperatures, the process is frequently ineffective and difficult to control. One alternative is to use ion-exchange. In the present study, a novel ion-exchanger, metakaolin geopolymer (MK-GP), was prepared, characterised, and tested. Batch experiments with powdered MK-GP indicated that the maximum exchange capacities were 31.79, 28.77, and 17.75 mg/g in synthetic, screened, and pre-sedimented municipal wastewater, respectively, according to the Sips isotherm (R2 ≥ 0.91). Kinetics followed the pseudo-second-order rate equation in all cases (kp2 = 0.04–0.24 g mg−1 min−1, R2 ≥ 0.97) and the equilibrium was reached within 30–90 min. Granulated MK-GP proved to be suitable for a continuous column mode use. Granules were high-strength, porous at the surface and could be regenerated multiple times with NaCl/NaOH. A bench-scale pilot test further confirmed the feasibility of granulated MK-GP in practical conditions at a municipal wastewater treatment plant: consistently <4 mg/L could be reached even though wastewater had low temperature (approx. 10°C). The results indicate that powdered or granulated MK-GP might have practical potential for removal and possible recovery of from municipal wastewaters. The simple and low-energy preparation method for MK-GP further increases the significance of the results.

[1]  Leema A. Al-Makhadmeh,et al.  Fly ash based geopolymer for heavy metal removal: A case study on copper removal , 2015 .

[2]  M. Krom,et al.  Spectrophotometric determination of ammonia: a study of a modified Berthelot reaction using salicylate and dichloroisocyanurate , 1980 .

[3]  Shaobin Wang,et al.  Geopolymeric adsorbents from fly ash for dye removal from aqueous solution. , 2006, Journal of colloid and interface science.

[4]  Y. Ho,et al.  Pseudo-second order model for sorption processes , 1999 .

[5]  Wei Zhou,et al.  A comparative study on fly ash, geopolymer and faujasite block for Pb removal from aqueous solution , 2016 .

[6]  J. Rämö,et al.  Sulphate removal over barium-modified blast-furnace-slag geopolymer. , 2016, Journal of hazardous materials.

[7]  X. Cui,et al.  Facile fabrication of green geopolymer/alginate hybrid spheres for efficient removal of Cu(II) in water: Batch and column studies , 2017 .

[8]  J. Oleszkiewicz,et al.  Effect of Cold‐Temperature Shock on Nitrification , 2007, Water environment research : a research publication of the Water Environment Federation.

[9]  R. Sips,et al.  On the Structure of a Catalyst Surface , 1948 .

[10]  K. Komnitsas,et al.  Microstructural characteristics and adsorption potential of a zeolitic tuff–metakaolin geopolymer , 2015 .

[11]  Takaomi Kobayashi,et al.  Metakaolin-Based Geopolymers for Targeted Adsorbents to Heavy Metal Ion Separation , 2014 .

[12]  M. Y. Arica,et al.  Biosorption of inorganic mercury and alkylmercury species on to Phanerochaete chrysosporium mycelium , 1999 .

[13]  T. Luukkonen New adsorption and oxidation-based approaches for water and wastewater treatment : studies regarding organic peracids, boiler-water treatment, and geopolymers , 2016 .

[14]  H. D. Stensel,et al.  Wastewater Engineering: Treatment and Reuse , 2002 .

[15]  António Albuquerque,et al.  Mineral Waste Geopolymeric Artificial Aggregates as Alternative Materials for Wastewater-Treatment Processes: Study of Structural Stability and pH Variation in Water , 2012 .

[16]  S. Svilović,et al.  Removal of copper and cobalt ions by fly ash-based geopolymer from solutions-equilibrium study , 2016 .

[17]  S. Sufian,et al.  Effective removal of methylene blue from water using phosphoric acid based geopolymers: synthesis, characterizations and adsorption studies , 2015 .

[18]  Kamel K. Al-Zboon,et al.  Fly ash-based geopolymer for Pb removal from aqueous solution. , 2011, Journal of hazardous materials.

[19]  M. Khamidun,et al.  Understanding of mass transfer resistance for the adsorption of solute onto porous material from the modified mass transfer factor models , 2013 .

[20]  Yan He,et al.  Preparation and characterization of porous metakaolin-based inorganic polymer spheres as an adsorbent , 2015 .

[21]  Yan He,et al.  Porous geopolymeric spheres for removal of Cu(II) from aqueous solution: synthesis and evaluation. , 2015, Journal of hazardous materials.

[22]  Zhiwei Wang,et al.  Study on zeolite enhanced contact-adsorption regeneration-stabilization process for nitrogen removal. , 2008, Journal of hazardous materials.

[23]  R. Wetzel Limnology: Lake and River Ecosystems , 1975 .

[24]  Takaomi Kobayashi,et al.  Cesium-adsorbent Geopolymer Foams Based on Silica from Rice Husk and Metakaolin , 2014 .

[25]  L. Sun,et al.  Removal of ammonium from municipal landfill leachate using natural zeolites , 2015, Environmental technology.

[26]  Hongfu He,et al.  Nutrient sequestration from wastewater by using zeolite Na-P1 synthesized from coal fly ash , 2017, Environmental technology.

[27]  M. Marques,et al.  Removal of ammonia nitrogen from distilled old landfill leachate by adsorption on raw and modified aluminosilicate , 2017, Environmental technology.

[28]  J. Labrincha,et al.  Porous geopolymer spheres as novel pH buffering materials , 2017 .

[29]  J. Rämö,et al.  Metakaolin geopolymer characterization and application for ammonium removal from model solutions and landfill leachate , 2016 .

[30]  J. Niinimäki,et al.  Lightweight aggregates produced by granulation of peat-wood fly ash with alkali activator , 2016 .

[31]  N. Shah,et al.  Economic and environmental evaluation of nitrogen removal and recovery methods from wastewater. , 2016, Bioresource technology.

[32]  Chunjie Yan,et al.  A facile method for preparation of floatable and permeable fly ash-based geopolymer block , 2016 .

[33]  H. Javadian,et al.  Study of the adsorption of Cd (II) from aqueous solution using zeolite-based geopolymer, synthesized from coal fly ash; kinetic, isotherm and thermodynamic studies , 2015 .

[34]  C. Patinha,et al.  The effect of natural zeolite on microstructure, mechanical and heavy metals adsorption properties of metakaolin based geopolymers , 2016 .

[35]  J. Rämö,et al.  Simultaneous removal of Ni(II), As(III), and Sb(III) from spiked mine effluent with metakaolin and blast-furnace-slag geopolymers. , 2016, Journal of environmental management.

[36]  J. Deventer,et al.  Geopolymer technology: the current state of the art , 2007 .

[37]  T. Cheng,et al.  The heavy metal adsorption characteristics on metakaolin-based geopolymer , 2012 .

[38]  Annelie Hedström,et al.  Ion Exchange of Ammonium in Zeolites: A Literature Review , 2001 .

[39]  John L. Provis,et al.  The role of particle technology in developing sustainable construction materials , 2010 .

[40]  H. Khoury,et al.  The influence of using Jordanian natural zeolite on the adsorption, physical, and mechanical properties of geopolymers products. , 2009, Journal of hazardous materials.

[41]  Yuan Yuan,et al.  Preparation of geopolymer-based inorganic membrane for removing Ni(2+) from wastewater. , 2015, Journal of hazardous materials.

[42]  R. C. Weast CRC Handbook of Chemistry and Physics , 1973 .