A review of low-temperature heat recovery technologies for industry processes

Abstract The amount of low-temperature heat generated in industrial processes is high, but recycling is limited due to low grade and low recycling efficiency, which is one of the reasons for low energy efficiency. It implies that there is a great potential for low-temperature heat recovery and utilization. This article provided a detailed review of recent advances in the development of low-temperature thermal upgrades, power generation, refrigeration, and thermal energy storage. The detailed description will be given from the aspects of system structure improvement, work medium improvement, and thermodynamic and economic performance evaluation. It also pointed out the development bottlenecks and future development trends of various technologies. The low-temperature heat combined utilization technology can recover waste heat in an all-round and effective manner, and has great development prospects.

[1]  Min Xu,et al.  Equilibrium Model and Performances of an Isopropanol–Acetone–Hydrogen Chemical Heat Pump with a Reactive Distillation Column , 2013 .

[2]  Daniele Fiaschi,et al.  Design and performance prediction of radial ORC turboexpanders , 2015 .

[3]  C. P. Jawahar,et al.  Generator absorber heat exchange based absorption cycle—A review , 2010 .

[4]  Wei He,et al.  Vapor compression multifunctional heat pumps in China: A review of configurations and operational modes , 2012 .

[5]  A. Sreekumar,et al.  Investigation on thermal reliability and corrosion characteristics of glutaric acid as an organic phase change material for solar thermal energy storage applications , 2018 .

[6]  K. Ng,et al.  Thermodynamic analysis of absorption chillers: internal dissipation and process average temperature , 1998 .

[7]  R. Escobar,et al.  Materials corrosion for thermal energy storage systems in concentrated solar power plants , 2018 .

[8]  Yong Tae Kang,et al.  High efficiency H2O/LiBr double effect absorption cycles with multi-heat sources for tri-generation application , 2017 .

[9]  Yaping Chen,et al.  Dual-pressure vaporization Kalina cycle for cascade reclaiming heat resource for power generation , 2015 .

[10]  Satha Aphornratana,et al.  Evaluation of a novel combined ejector-absorption refrigeration cycle — I: computer simulation , 1996 .

[11]  M. I. Fadhel,et al.  Review on advanced of solar assisted chemical heat pump dryer for agriculture produce , 2011 .

[12]  Gequn Shu,et al.  Multi-approach evaluations of a cascade-Organic Rankine Cycle (C-ORC) system driven by diesel engine waste heat: Part A – Thermodynamic evaluations , 2016 .

[13]  F. Duan,et al.  Three-dimensional transient numerical study on latent heat thermal storage for waste heat recovery from a low temperature gas flow , 2017 .

[14]  Xiaolin Wang,et al.  Absorption Cooling: A review of Lithium Bromide-water chiller technologies , 2009 .

[15]  Kyaw Thu,et al.  A second law analysis and entropy generation minimization of an absorption chiller , 2011 .

[16]  Zongchang Zhao,et al.  Thermodynamic performance of a double-effect absorption heat-transformer using TFE/E181 as the working fluid , 2005 .

[17]  Jianlin Yu,et al.  Performance evaluation and optimal configuration analysis of a CO2/NH3 cascade refrigeration system with falling film evaporator–condenser , 2014 .

[18]  Fei Yu,et al.  Multi-objective optimization of fin-and-tube evaporator for a diesel engine-organic Rankine cycle (ORC) combined system using particle swarm optimization algorithm , 2017 .

[19]  M. Fallah,et al.  Advanced exergy analysis of the Kalina cycle applied for low temperature enhanced geothermal system , 2016 .

[20]  Hang Zhang,et al.  Technical and economic feasibility of the Isopropanol-Acetone-Hydrogen chemical heat pump based on a lab-scale prototype , 2017 .

[21]  Fredrik Haglind,et al.  Selection and optimization of pure and mixed working fluids for low grade heat utilization using organic Rankine cycles , 2014 .

[22]  G. Fang,et al.  An overview of thermal energy storage systems , 2018 .

[23]  Tzong-Shing Lee,et al.  Thermodynamic analysis of optimal condensing temperature of cascade-condenser in CO2/NH3 cascade refrigeration systems , 2005 .

[24]  Ruzhu Wang,et al.  Comparison of the adsorption performance of compound adsorbent in a refrigeration cycle with and without mass recovery , 2006 .

[25]  Yufeng Zhang,et al.  Experimental study on a bifunctional heat utilization system of heat pump and power generation using low-grade heat source , 2017 .

[26]  Mario Montes,et al.  Selectivity in the High-Temperature Hydrogenation of Acetone with Silica-Supported Nickel and Cobalt Catalysts , 1995 .

[27]  Robert Dobson,et al.  Characterising a turbine for application in an organic Rankine cycle , 2015 .

[28]  P. Nag,et al.  Exergy analysis of the Kalina cycle , 1998 .

[29]  Ruzhu Wang,et al.  Numerical investigation of a two-stage air-cooled absorption refrigeration system for solar cooling: Cycle analysis and absorption cooling performances , 2011 .

[30]  Kai Choong Leong,et al.  Numerical study of a novel cascading adsorption cycle , 2006 .

[31]  D. Brüggemann,et al.  Second law analysis of novel working fluid pairs for waste heat recovery by the Kalina cycle , 2017 .

[32]  Raya Al-Dadah,et al.  Modelling and optimization of organic Rankine cycle based on a small-scale radial inflow turbine , 2015 .

[33]  Ayad Al Jubori,et al.  Development of micro-scale axial and radial turbines for low-temperature heat source driven organic Rankine cycle , 2016 .

[34]  Ruzhu Wang,et al.  A novel variable effect LiBr-water absorption refrigeration cycle , 2013 .

[35]  Da‐Wen Sun Thermodynamic analysis of the operation of two-stage metal-hydride heat pumps , 1996 .

[36]  Marc A. Rosen,et al.  Exergoeconomic and environmental analyses of CO 2 /NH 3 cascade refrigeration systems equipped with different types of flash tank intercoolers , 2016 .

[37]  Jahar Sarkar,et al.  Review and future trends of supercritical CO2 Rankine cycle for low-grade heat conversion , 2015 .

[38]  Ruzhu Wang,et al.  Analysis on maximum internal heat recovery of a mass-coupled two stage ammonia water absorption refrigeration system , 2017 .

[39]  P. Muthukumar,et al.  Simulation of double-stage double-effect metal hydride heat pump , 2010 .

[40]  Yeong-Koo Yeo,et al.  Optimal design of a chemical heat pump using the 2-propanol/acetone/hydrogen system , 1997 .

[41]  Qingquan Su,et al.  A working pair of CaCl2–LiBr–LiNO3/H2O and its application in a single-stage solar-driven absorption refrigeration cycle. , 2018 .

[42]  M. He,et al.  A review of research on the Kalina cycle , 2012 .

[43]  E. Anil Kumar,et al.  Study of ammoniated salts based thermochemical energy storage system with heat up-gradation: A thermodynamic approach , 2017 .

[44]  A. Mosaffa,et al.  Thermodynamic analysis of a cascaded compression – Absorption heat pump and comparison with three classes of conventional heat pumps for the waste heat recovery , 2018 .

[45]  Manfred Groll,et al.  Development of a two-stage metal hydride system as topping cycle in cascading sorption systems for cold generation , 2002 .

[46]  Yong Tae Kang,et al.  The effect of micro-scale surface treatment on heat and mass transfer performance for a falling film H2O/LiBr absorber , 2003 .

[47]  Rainer Scholz,et al.  Economic Efficiency of Mobile Latent Heat Storages , 2014 .

[48]  Clemens Forman,et al.  Estimating the global waste heat potential , 2016 .

[49]  Fujun Zhang,et al.  Investigation on efficiency improvement of a Kalina cycle by sliding condensation pressure method , 2017 .

[50]  W. Mooksuwan,et al.  Study on 2‐propanol/acetone/hydrogen chemical heat pump: endothermic dehydrogenation of 2‐propanol , 2000 .

[51]  Niu Lijuan,et al.  Experimental evaluation on thermal performance of an air-cooled absorption refrigeration cycle with NH3–LiNO3 and NH3–NaSCN refrigerant solutions , 2016 .

[52]  Yiqiang Jiang,et al.  Advances in vapor compression air source heat pump system in cold regions: A review , 2018 .

[53]  Li Wang,et al.  Form-stable LiNO3–NaNO3–KNO3–Ca(NO3)2/calcium silicate composite phase change material (PCM) for mid-low temperature thermal energy storage , 2015 .

[54]  F. Su,et al.  Characteristic analysis of adiabatic spray absorption process in aqueous lithium bromide solution , 2011 .

[55]  Ruzhu Wang,et al.  A review on transportation of heat energy over long distance: Exploratory development , 2009 .

[56]  L. Bonaccorsi,et al.  Efficiency improvement of heat storage materials for MgO/H2O/Mg(OH)2 chemical heat pumps , 2016 .

[57]  Ruzhu Wang,et al.  Study on heat and mass recovery in adsorption refrigeration cycles , 2001 .

[58]  Boiling heat transfer and pressure drop of NH3/LiNO3 and NH3/(LiNO3 + H2O) in a plate heat exchanger , 2016 .

[59]  R. Ventas,et al.  Experimental assessment of vapour adiabatic absorption into solution droplets using a full cone nozzle , 2015 .

[60]  Vasile Minea,et al.  Power generation with ORC machines using low-grade waste heat or renewable energy , 2014 .

[61]  B. Tao,et al.  Experimental investigation on vapor injection heat pump with a newly designed twin rotary variable speed compressor for cold regions , 2016 .

[62]  Xiangguo Xu,et al.  A new open absorption heat pump for latent heat recovery from moist gas , 2015 .

[63]  Muhammad Imran,et al.  Volumetric expanders for low grade heat and waste heat recovery applications , 2016 .

[64]  V. Zare,et al.  Employing thermoelectric generator for power generation enhancement in a Kalina cycle driven by low-grade geothermal energy , 2018 .

[65]  Xiaosong Zhang,et al.  Analysis of NH3-H2O-LiBr absorption refrigeration integrated with an electrodialysis device , 2017 .

[66]  Wenxing Shi,et al.  A new heating system based on coupled air source absorption heat pump for cold regions: Energy saving analysis , 2013 .

[67]  Reinhard Radermacher,et al.  Thermodynamic and heat transfer implications of working fluid mixtures in Rankine cycles , 1989 .

[68]  Markus Preißinger,et al.  Low grade waste heat recovery with subcritical and supercritical Organic Rankine Cycle based on natural refrigerants and their binary mixtures , 2015 .

[69]  Jing Zhang,et al.  A comprehensive review on advances and applications of industrial heat pumps based on the practices in China , 2016 .

[70]  Patrick Linke,et al.  Multi-level Design and Selection of Optimum Working Fluids and ORC Systems for Power and Heat Cogeneration from Low Enthalpy Renewable Sources , 2012 .

[71]  Jin-Kuk Kim,et al.  Composition optimisation of working fluids for Organic Rankine Cycles and Kalina cycles , 2013 .

[72]  Steven Lecompte,et al.  Review of organic Rankine cycle (ORC) architectures for waste heat recovery , 2015 .

[73]  A. Roskilly,et al.  Integrated chemisorption cycles for ultra-low grade heat recovery and thermo-electric energy storage and exploitation , 2016 .

[74]  Yan Li,et al.  Optimization study of distillation column based on Type I absorption heat pump , 2017 .

[75]  R. K. Sharma,et al.  Developments in organic solid–liquid phase change materials and their applications in thermal energy storage , 2015 .

[76]  A. Roskilly,et al.  Chemisorption power generation driven by low grade heat – Theoretical analysis and comparison with pumpless ORC , 2017 .

[77]  Edmond P. Byrne,et al.  Recycling waste heat energy using vapour absorption heat transformers: A review , 2015 .

[78]  Yaodong Wang,et al.  Optimisation of a Novel Resorption Cogeneration Using Mass and Heat Recovery , 2014 .

[79]  Takao Kashiwagi,et al.  A four-bed mass recovery adsorption refrigeration cycle driven by low temperature waste/renewable heat source , 2004 .

[80]  Takao Kashiwagi,et al.  Study on a dual-mode, multi-stage, multi-bed regenerative adsorption chiller , 2006 .

[81]  Wenxing Shi,et al.  Comparisons of different working pairs and cycles on the performance of absorption heat pump for heating and domestic hot water in cold regions , 2012 .

[82]  Luisa F. Cabeza,et al.  Review on system and materials requirements for high temperature thermal energy storage. Part 1: General requirements , 2017 .

[83]  Thore Berntsson,et al.  The compression/absorption cycle - influence of some major parameters on COP and a comparison with the compression cycle , 1999 .

[84]  Mario Montes,et al.  Effect of the design variables on the energy performance and size parameters of a heat transformer based on the system acetone/H2/2-propanol , 1992 .

[85]  Jiangfeng Wang,et al.  Assessment of off-design performance of a Kalina cycle driven by low-grade heat source , 2017 .

[86]  Michele Pinelli,et al.  Experimental Performance of a Micro-ORC Energy System for Low Grade Heat Recovery , 2017 .

[87]  Massimiliano Manfren,et al.  Energy Savings through Variable Speed Compressor Heat Pump Systems , 2012 .

[88]  Chi-Chuan Wang,et al.  Effect of working fluids on organic Rankine cycle for waste heat recovery , 2004 .

[89]  Chao Liu,et al.  Performance research on modified KCS (Kalina cycle system) 11 without throttle valve , 2014 .

[90]  Raya Al-Dadah,et al.  Parametric analysis and optimization of a small-scale radial turbine for Organic Rankine Cycle , 2015 .

[91]  J. Jänchen,et al.  Adsorption Properties of Modified Zeolites for Operating Range Enhancement of Adsorption Heat Pumps through the Use of Organic Adsorptive Agents , 2016 .

[92]  Jaehyeok Heo,et al.  Performance characteristics of a two-stage CO2 heat pump water heater adopting a sub-cooler vapor injection cycle at various operating conditions , 2014 .

[93]  Omar Abdelaziz,et al.  State-of-the-art review on crystallization control technologies for water/LiBr absorption heat pumps , 2011 .

[94]  Ruzhu Wang,et al.  Performance improvement of adsorption cooling by heat and mass recovery operation , 2001 .

[95]  Min Li,et al.  Analytical thermal efficiency of medium-low temperature organic Rankine cycles derived from entropy-generation analysis , 2016 .

[96]  Shugang Wang,et al.  Optimum compressor cylinder volume ratio for two-stage compression air source heat pump systems. , 2016 .

[97]  Oguz Arslan,et al.  Power generation from medium temperature geothermal resources: ANN-based optimization of Kalina cycl , 2011 .

[98]  R. AL-Dadah,et al.  Aluminium fumarate and CPO-27(Ni) MOFs: Characterization and thermodynamic analysis for adsorption heat pump applications , 2016 .

[99]  M. P. Maiya,et al.  Thermodynamic comparison of water-based working fluid combinations for a vapour absorption refrigeration system , 1998 .

[100]  Boyuan Fan,et al.  A performance analysis of a novel system of a dual loop bottoming organic Rankine cycle (ORC) with a light-duty diesel engine , 2013 .

[101]  Steven Lecompte,et al.  Exergy analysis of zeotropic mixtures as working fluids in organic rankine cycles , 2014 .

[102]  Abdessamad Faik,et al.  Graphite foam as interpenetrating matrices for phase change paraffin wax: A candidate composite for low temperature thermal energy storage , 2017 .

[103]  Z Gnutek,et al.  The thermodynamic analysis of multicycle ORC engine , 2001 .

[104]  Emilie Sauret,et al.  Turbulent Dense Gas Flow Characteristics in Swirling Conical Diffuser , 2017 .

[105]  Xuanming Su,et al.  Energy–exergy analysis and optimization of the solar-boosted Kalina cycle system 11 (KCS-11) , 2014 .

[106]  Xuedan Zhang,et al.  A review of heat pump systems for heating and cooling of buildings in China in the last decade , 2015 .

[107]  Xianting Li,et al.  Experimental investigation on NH3–H2O compression-assisted absorption heat pump (CAHP) for low temperature heating under lower driving sources , 2016 .

[108]  Emilie Sauret,et al.  Three-dimensional off-design numerical analysis of an organic Rankine cycle radial-inflow turbine , 2014 .

[109]  Weiwei Yang,et al.  Performance analysis of different high-temperature heat pump systems for low-grade waste heat recovery , 2014 .

[110]  Muhsin Kilic,et al.  Second law-based thermodynamic analysis of water-lithium bromide absorption refrigeration system , 2007 .

[111]  Xiaosong Zhang,et al.  A novel low-grade heat-driven absorption refrigeration system with LiCl–H2O and LiBr–H2O working pairs , 2015 .

[112]  Qiang Wang,et al.  Application of waste heat recovery technology in union station and analysis of energy efficiency , 2017 .

[113]  L. Cabeza,et al.  Selection of materials with potential in sensible thermal energy storage , 2010 .

[114]  Jianlin Yu,et al.  Theoretical analysis on optimal configurations of heat exchanger and compressor in a two-stage compression air source heat pump system , 2016 .

[115]  E. Proverbio,et al.  Synthesis of SAPO-34 zeolite filled macrocellular foams for adsorption heat pump applications: A preliminary study , 2017 .

[116]  Ayad Al Jubori,et al.  An innovative small-scale two-stage axial turbine for low-temperature organic Rankine cycle , 2017 .

[118]  K. Kim,et al.  Thermal performance of brazed metalfoam-plate heat exchanger as an evaporator for organic Rankine cycle , 2017 .

[119]  Jiangfeng Wang,et al.  Comprehensive analysis and optimization of Kalina-Flash cycles for low-grade heat source , 2018 .

[120]  Iman Janghorban Esfahani,et al.  Thermodynamic and economic studies of two new high efficient power-cooling cogeneration systems based on Kalina and absorption refrigeration cycles , 2016 .

[121]  L. Duanmu,et al.  Research and Application of Flue Gas Waste Heat Recovery in Co-generation Based on Absorption Heat-exchange , 2016 .

[122]  Shuang-Ying Wu,et al.  Comparative Investigation on Thermo-economic Performance between ORC and LiBr Absorption Refrigerating Cycle in Waste Heat Recovery☆ , 2017 .

[123]  Chun-wei Gu,et al.  Influence of the radial-inflow turbine efficiency prediction on the design and analysis of the Organic Rankine Cycle (ORC) system , 2016 .

[124]  Jianlin Yu,et al.  Solar-assisted auto-cascade heat pump cycle with zeotropic mixture R32/R290 for small water heaters , 2015 .

[125]  I. Eames,et al.  Thermodynamic analysis of absorption refrigeration cycles using the second law of thermodynamics method , 1995 .

[126]  N. Filiz Tumen Ozdil,et al.  Investigation of the effect of the water phase in the evaporator inlet on economic performance for an Organic Rankine Cycle (ORC) based on industrial data , 2016 .

[127]  Pierre Neveu,et al.  A review of chemical heat pump technology and applications , 2001 .

[128]  P. Muthukumar,et al.  Performance investigation of double-stage metal hydride based heat pump , 2010 .

[129]  Yong Tae Kang,et al.  Analytical investigation of two different absorption modes: falling film and bubble types , 2000 .

[130]  Ramón Ferreiro García,et al.  A review of thermodynamic cycles used in low temperature recovery systems over the last two years , 2018 .

[131]  Ji Hwan Jeong,et al.  The selection of volume ratio of two-stage rotary compressor and its effects on air-to-water heat pump with flash tank cycle , 2013 .

[132]  Noboru Yamada,et al.  Experiment on pumpless Rankine-type cycle with scroll expander , 2013 .

[133]  R. Lizarte,et al.  Evaluation of mass absorption in LiBr flat-fan sheets , 2009 .

[134]  Patrick Linke,et al.  Systematic Methods for Working Fluid Selection and the Design, Integration and Control of Organic Rankine Cycles—A Review , 2015 .

[135]  Rosenberg J. Romero,et al.  Performance of Different Experimental Absorber Designs in Absorption Heat Pump Cycle Technologies: A Review , 2014 .

[136]  Soo-Yong Cho,et al.  A study of the optimal operating conditions in the organic Rankine cycle using a turbo-expander for fluctuations of the available thermal energy , 2014 .

[137]  D. J. Krishna,et al.  Step by Step Methodology for the Assessment of Metal Corrosion Rate with PCMs Suitable for Low Temperature Heat Storage Applications , 2017 .

[138]  Xiulan Huai,et al.  Design of an isopropanol–acetone–hydrogen chemical heat pump with exothermic reactors in series , 2014 .

[139]  Ali A. Dehghan,et al.  An exergy based comparative study between LiBr/water absorption refrigeration systems from half effect to triple effect , 2017 .

[140]  Enhua Wang,et al.  A numerical analysis of a composition-adjustable Kalina cycle power plant for power generation from low-temperature geothermal sources , 2016 .

[141]  Jianghong Wu,et al.  Transient behavior and dynamic performance of cascade heat pump water heater with thermal storage system , 2012 .

[142]  Adsorption Refrigeration New Opportunities for Solar , 2011 .

[143]  Xiulan Huai,et al.  3D CFD modeling of acetone hydrogenation in fixed bed reactor with spherical particles , 2013 .

[144]  R. Radermacher,et al.  Development of a vapor compression cycle with a solution circuit and desorber/absorber heat exchange , 1997 .

[145]  Thore Berntsson,et al.  The compression/absorption heat pump cycle—conceptual design improvements and comparisons with the compression cycle , 2002 .

[146]  Da-Wen Sun,et al.  Comparison of the performances of NH3-H2O, NH3-LiNO3 and NH3-NaSCN absorption refrigeration systems , 1998 .

[147]  Jagannath Munda,et al.  Power Generation from Condenser Waste Heat in Coal-fired Thermal Power Plant Using Kalina Cycle☆ , 2016 .

[148]  Ruzhu Wang,et al.  Integrated energy storage and energy upgrade, combined cooling and heating supply, and waste heat recovery with solid–gas thermochemical sorption heat transformer , 2014 .

[149]  Maoqing Li,et al.  Construction and preliminary test of a low-temperature regenerative Organic Rankine Cycle (ORC) using R123 , 2013 .

[150]  K. Satanphol,et al.  A study on optimal composition of zeotropic working fluid in an Organic Rankine Cycle (ORC) for low grade heat recovery , 2017 .

[151]  Nasruddin,et al.  Energy and exergy analysis of kalina cycle system (KCS) 34 with mass fraction ammonia-water mixture variation , 2009 .

[152]  Pradeep Bansal,et al.  Thermodynamic analysis of an R744-R717 cascade refrigeration system , 2008 .

[153]  Yeong Koo Yeo,et al.  Chemical heat pump based on dehydrogenation and hydrogenation of i-propanol and acetone , 1992 .

[154]  Hailong Li,et al.  Experimental study on the direct/indirect contact energy storage container in mobilized thermal energy system (M-TES) , 2014 .

[155]  Vincent Lemort,et al.  Experimental study on an open-drive scroll expander integrated into an ORC (Organic Rankine Cycle) system with R245fa as working fluid , 2013 .

[156]  Pornpote Piumsomboon,et al.  Isopropanol–acetone–hydrogen chemical heat pump: A demonstration unit , 2007 .

[157]  Muhammad Imran,et al.  Multi-objective optimization of evaporator of organic Rankine cycle (ORC) for low temperature geothermal heat source , 2015 .

[158]  H. J. Dakkama,et al.  Integrated evaporator–condenser cascaded adsorption system for low temperature cooling using different working pairs , 2017 .

[159]  D. C. Wang,et al.  A review on adsorption refrigeration technology and adsorption deterioration in physical adsorption systems , 2010 .

[160]  Magnus Genrup,et al.  Improved load control for a steam cycle combined heat and power plant , 2010 .

[161]  H. Majdi Performance evaluation of combined ejector LiBr/H2O absorption cooling cycle , 2016 .

[162]  Takao Kashiwagi,et al.  Experimental investigation of mass recovery adsorption refrigeration cycle , 2005 .

[163]  Xianting Li,et al.  Experimental investigation on NH3–H2O compression-assisted absorption heat pump (CAHP) for low temperature heating in colder conditions , 2016 .

[164]  L. Bonaccorsi,et al.  Thermochemical performance of carbon nanotubes based hybrid materials for MgO/H2O/Mg(OH)2 chemical heat pumps , 2016 .

[165]  José M. Corberán,et al.  Analysis and optimization of subcritical two-stage vapor injection heat pump systems , 2014 .

[166]  S. Chungpaibulpatana,et al.  A review of absorption refrigeration technologies , 2001 .

[167]  Ruzhu Wang,et al.  An improved cycle for large temperature lifts application in water-ammonia absorption system , 2017 .

[168]  Wei Zhang,et al.  Effects of evaporator superheat on system operation stability of an organic Rankine cycle , 2017 .