A review of non-destructive techniques used for mechanical damage assessment in polymer composites

[1]  O. Bou Matar,et al.  Nonlinear based Time Reversal acoustic applied to crack detection: Simulations and experiments , 2019 .

[2]  M. Kharrat,et al.  Influence of damage accumulation under fatigue loading on the AE-based health assessment of composite materials: Wave distortion and AE-features evolution as a function of damage level , 2016, Composites Part A: Applied Science and Manufacturing.

[3]  Mouloud Feliachi,et al.  Development of circular arrayed eddy current sensor for detecting fibers orientation and in-plane fiber waviness in unidirectional CFRP , 2017 .

[4]  Mathias Kersemans,et al.  Non-destructive monitoring of delamination healing of a CFRP composite with a thermoplastic ionomer interlayer , 2017 .

[5]  F. Bouillon,et al.  Accurate measurement of in-plane and out-of-plane shear moduli on 3D woven SiC-SiBC material , 2017 .

[6]  N. Athanasopoulos,et al.  Damage detection on composite materials with active thermography and digital image processing , 2017 .

[7]  N. Saintier,et al.  In situ X-ray tomography investigation on damage mechanisms in short glass fibre reinforced thermoplastics: Effects of fibre orientation and relative humidity , 2017 .

[8]  Gisela Lanza,et al.  Conception of an Eddy Current In-process Quality Control for the Production of Carbon Fibre Reinforced Components in the RTM Process Chain , 2017 .

[9]  S. Gholizadeh,et al.  A review of non-destructive testing methods of composite materials , 2022 .

[10]  H. Kim,et al.  Nondestructive evaluation of hidden multi-delamination in a glass-fiber-reinforced plastic composite using terahertz spectroscopy , 2016 .

[11]  Robert A. Smith,et al.  Non-destructive characterisation of composite microstructures , 2016 .

[12]  Yoshiro Suzuki,et al.  Visualization and size estimation of fiber waviness in multidirectional CFRP laminates using eddy current imaging , 2016 .

[13]  An-bo Ming,et al.  Investigation on the damage evolution in the impacted composite material based on active infrared thermography , 2016 .

[14]  N. Pugno,et al.  Cracks, microcracks and fracture in polymer structures: Formation, detection, autonomic repair , 2016 .

[15]  S. Guessasma,et al.  Large‐Scale X‐Ray Microtomography Analysis of Fiber Orientation in Weld Line of Short Glass Fiber Reinforced Thermoplastic and Related Elasticity Behavior , 2016 .

[16]  P J Withers,et al.  A comparison of different approaches for imaging cracks in composites by X-ray microtomography , 2016, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[17]  Chokri Cherif,et al.  Automated detection of yarn orientation in 3D-draped carbon fiber fabrics and preforms from eddy current data , 2016 .

[18]  A. E. Mahi,et al.  Fatigue behaviour and structural health monitoring by acoustic emission of E-glass/epoxy laminates with piezoelectric implant , 2016 .

[19]  Nicolas Saintier,et al.  Damage mechanisms in short glass fibre reinforced thermoplastic during in situ microtomography tensile tests , 2016 .

[20]  Mira Mitra,et al.  Guided wave based structural health monitoring: A review , 2016 .

[21]  Philip J. Withers,et al.  Evolution of damage during the fatigue of 3D woven glass-fibre reinforced composites subjected to tension-tension loading observed by time-lapse X-ray tomography , 2016 .

[22]  Hélène Welemane,et al.  Damage detection in CFRP by coupling acoustic emission and infrared thermography , 2016 .

[23]  C. Sklarczyk.  Microwave, millimeter wave and terahertz (MMT) techniques for materials characterization , 2016 .

[24]  Gabriel Sas,et al.  Using digital image correlation to evaluate fatigue behavior of strengthened reinforced concrete beams , 2015 .

[25]  Yongming Liu,et al.  In-situ fatigue life prognosis for composite laminates based on stiffness degradation , 2015 .

[26]  M. Ourak,et al.  Multi-technique approach for non destructive diagnostic of structural composite materials using bulk ultrasonic waves, guided waves, acoustic emission and infrared thermography , 2015 .

[27]  Petr Homola,et al.  Application of material analysis and eddy current conductivity tests to aircraft accident investigation , 2015 .

[28]  M. Gigliotti,et al.  Electro-mechanical fatigue of CFRP laminates for aircraft applications , 2015 .

[29]  Yoshiro Suzuki,et al.  Detection of delamination in thermoplastic CFRP welded zones using induction heating assisted eddy current testing , 2015 .

[30]  Gui Yun Tian,et al.  Investigation into eddy current pulsed thermography for rolling contact fatigue detection and characterization , 2015 .

[31]  Akira Todoroki,et al.  Design of eddy current-based dielectric constant meter for defect detection in glass fiber reinforced plastics , 2015 .

[32]  E. Guglielmino,et al.  Experimental analyses of SFRP material under static and fatigue loading by means of thermographic and DIC techniques , 2015 .

[33]  Z. Fawaz,et al.  Modeling fatigue damage evolution in polymer matrix composite structures and validation using in-situ digital image correlation , 2015 .

[34]  Wang Yang,et al.  Study on probability of detection (POD) determination using lock-in thermography for nondestructive inspection (NDI) of CFRP composite materials , 2015 .

[35]  Wang Yang,et al.  Inverse heat transfer approach for nondestructive estimation the size and depth of subsurface defects of CFRP composite using lock-in thermography , 2015 .

[36]  Karen Margaret Holford,et al.  Parameter Correction Technique (PCT): A novel method for acoustic emission characterisation in large-scale composites , 2015 .

[37]  Karen Margaret Holford,et al.  Localisation and identification of fatigue matrix cracking and delamination in a carbon fibre panel by acoustic emission , 2015 .

[38]  Francesca Cosmi,et al.  Threshold Identification for Micro‐Tomographic Damage Characterisation in a Short‐Fibre‐Reinforced Polymer , 2015 .

[39]  Z. Fawaz,et al.  Non-destructive assessment of the fatigue strength and damage progression of satin woven fiber reinforced polymer matrix composites , 2015 .

[40]  Ian Sinclair,et al.  In situ synchrotron tomographic evaluation of the effect of toughening strategies on fatigue micromechanisms in carbon fibre reinforced polymers , 2015 .

[41]  M. Ourak,et al.  Mechanical damage characterization of glass fiber-reinforced polymer laminates by ultrasonic maps , 2015 .

[42]  Adrian P. Mouritz,et al.  Acoustic emission analysis of composite pressure vessels under constant and cyclic pressure , 2015 .

[43]  Stéphane Roux,et al.  Damage measurements via DIC , 2015, International Journal of Fracture.

[44]  Gangbing Song,et al.  A review of damage detection methods for wind turbine blades , 2015 .

[45]  M. Collinson,et al.  Direct electrical cure of carbon fiber composites , 2015 .

[46]  S. Delruea,et al.  Non-Destructive Evaluation of Kissing Bonds using Local Defect Resonance (LDR) Spectroscopy: A Simulation Study , 2015 .

[47]  M. Aparna,et al.  Fatigue Testing of Continuous GFRP Composites Using Digital Image Correlation (DIC) Technique a Review , 2015 .

[48]  S. Thomas,et al.  ScienceDirect The Fourth International Conference on Through-life Engineering Services Review of Non-destructive Testing ( NDT ) Techniques and their applicability to thick walled composites , 2015 .

[49]  H. Lopes,et al.  Localization of damage with speckle shearography and higher order spatial derivatives , 2014 .

[50]  Ning Hu,et al.  Role of interlaminar interface on bulk conductivity and electrical anisotropy of CFRP laminates measured by eddy current method , 2014 .

[51]  S. Chaki,et al.  Mechanical damage assessment of Polymer–Matrix Composites using active infrared thermography , 2014 .

[52]  Francesco Aymerich,et al.  Impact damage detection in laminated composites by non-linear vibro-acoustic wave modulations , 2014 .

[53]  A. Scott,et al.  Fatigue micromechanism characterisation in carbon fibre reinforced polymers using synchrotron radiation computed tomography , 2014 .

[54]  Noureddine Zerhouni,et al.  An Unsupervised Pattern Recognition Approach for AE Data Originating from Fatigue Tests on Polymer-Composite Materials , 2014 .

[55]  Giovanni Maria Carlomagno,et al.  Infrared thermography to evaluate impact damage in glass/epoxy with manufacturing defects , 2014 .

[56]  N. Saintier,et al.  Multiscale fatigue damage characterization in short glass fiber reinforced polyamide-66 , 2014 .

[57]  A. Benaarbia,et al.  Kinetics of stored and dissipated energies associated with cyclic loadings of dry polyamide 6.6 specimens , 2014 .

[58]  Yunze He,et al.  Impact evaluation in carbon fiber reinforced plastic (CFRP) laminates using eddy current pulsed thermography , 2014 .

[59]  S. Chaki,et al.  Mechanical damage assessment of Glass Fiber-Reinforced Polymer composites using passive infrared thermography , 2014 .

[60]  Igor Solodov,et al.  Resonant Acoustic Nonlinearity of Defects for Highly-Efficient Nonlinear NDE , 2014 .

[61]  Alejandro Enfedaque,et al.  Automatic quantification of matrix cracking and fiber rotation by X-ray computed tomography in shear-deformed carbon fiber-reinforced laminates , 2014 .

[62]  Theodore E. Matikas,et al.  Rapid evaluation of the fatigue limit in composites using infrared lock-in thermography and acoustic emission , 2013 .

[63]  Constantinos Soutis,et al.  Subcritical damage mechanisms of bolted joints in CFRP composite laminates , 2013 .

[64]  Alexei Vinogradov,et al.  A real-time approach to acoustic emission clustering , 2013 .

[65]  Ivan Bartoli,et al.  Damage quantification in polymer composites using a hybrid NDT approach , 2013 .

[66]  Elodie Péronnet,et al.  Damage investigation in CFRP composites using full-field measurement techniques: Combination of digital image stereo-correlation, infrared thermography and X-ray tomography , 2013 .

[67]  F. Cosmi,et al.  Micro-CT investigation on fatigue damage evolution in short fibre reinforced polymers , 2013 .

[68]  Giovanni Maria Carlomagno,et al.  Porosity Distribution in Composite Structures with Infrared Thermography , 2013 .

[69]  V. Dattoma,et al.  Evaluation of energy of fatigue damage into GFRC through digital image correlation and thermography , 2013 .

[70]  Nezih Mrad,et al.  A Methodological Review of Piezoelectric Based Acoustic Wave Generation and Detection Techniques for Structural Health Monitoring , 2013 .

[71]  Norbert J. Delatte.  Review of Infrastructure Health in Civil Engineering, Volume I: Theory and Components, and Volume II: Applications and Management by Mohammed M. Ettouney and Sreenivas Alampalli , 2013 .

[72]  John Montesano,et al.  Use of infrared thermography to investigate the fatigue behavior of a carbon fiber reinforced polymer composite , 2013 .

[73]  Krishnan Balasubramaniam,et al.  Transmission and reflection of the fundamental Lamb modes in a metallic plate with a semi-infinite horizontal crack. , 2013, Ultrasonics.

[74]  S. Calloch,et al.  Fast prediction of the Wöhler curve from heat build-up measurements on Short Fiber Reinforced Plastic , 2013 .

[75]  Advanced ultrasonic non-destructive testing for damage detection on thick and curved composite elements for constructions , 2013 .

[76]  T. M. Young,et al.  Characterising the behaviour of composite single lap bonded joints using digital image correlation , 2013 .

[77]  Günther Pfeifer,et al.  Ultrasound Flow Sensor Based on Arrays of Piezoelectric Transducers Integrated in a Composite , 2013 .

[78]  Y. Y. Hung,et al.  Non-destructive evaluation (NDE) of composites: digital shearography , 2013 .

[79]  D. Petkie,et al.  Terahertz applications in the aerospace industry , 2013 .

[80]  Walid Harizi.  Caractérisation de l'endommagement des composites à matrice polymère par une approche multi-technique non destructive , 2012 .

[81]  Z. Pakiela,et al.  Digital Image Correlation measurements as a tool of composites deformation description , 2012 .

[82]  Edoardo Proverbio,et al.  Noise removal by cluster analysis after long time AE corrosion monitoring of steel reinforcement in concrete , 2012 .

[83]  Dapeng Chen,et al.  Defect Recognition in Thermosonic Imaging , 2012 .

[84]  C. Basaran,et al.  Far-field modeling of Moiré interferometry using scalar diffraction theory , 2012 .

[85]  David K. Hsu,et al.  NDE inspection of terahertz waves in wind turbine composites , 2012 .

[86]  J. Lahiri,et al.  In situ thermal diffusivity determination of anisotropic composite structures: Transverse diffusivity measurement , 2012 .

[87]  P. Wilcox,et al.  Imaging composite material using ultrasonic arrays , 2012 .

[88]  Tadeusz Uhl,et al.  Nonlinear acoustics for fatigue crack detection – experimental investigations of vibro-acoustic wave modulations , 2012 .

[89]  E. Cerreta,et al.  Dimensional Quantification of Embedded Voids or Objects in Three Dimensions Using X-Ray Tomography , 2012, Microscopy and Microanalysis.

[90]  Akira Todoroki,et al.  Impact-damage visualization in CFRP by resistive heating: Development of a new detection method for indentations caused by impact loads , 2012 .

[91]  Darryl P Almond,et al.  A new technique to detect defect size and depth in composite structures using digital shearography and unconstrained optimization , 2012 .

[92]  Chiara Colombo,et al.  Static and fatigue characterisation of new basalt fibre reinforced composites , 2012 .

[93]  G. Busse,et al.  A local defect resonance to enhance acoustic wave-defect interaction in ultrasonic nondestructive evaluation , 2011 .

[94]  G. Mayr,et al.  Active thermography as a quantitative method for non-destructive evaluation of porous carbon fiber reinforced polymers , 2011 .

[95]  Krishnan Balasubramaniam,et al.  Lamb wave based ultrasonic imaging of interface delamination in a composite T-joint , 2011 .

[96]  Ian Sinclair,et al.  In situ fibre fracture measurement in carbon-epoxy laminates using high resolution computed tomography , 2011 .

[97]  Rong-Sheng Lu,et al.  A Review of Optical NDT Technologies , 2011, Sensors.

[98]  Alkiviadis S. Paipetis,et al.  On the fatigue life prediction of CFRP laminates using the Electrical Resistance Change method , 2011 .

[99]  G. Busse,et al.  Air-coupled guided waves combined with thermography for monitoring fatigue in biaxially loaded composite tubes , 2011 .

[100]  F. Taillade,et al.  Shearography and pulsed stimulated infrared thermography applied to a nondestructive evaluation of FRP strengthening systems bonded on concrete structures , 2011 .

[101]  Theodore P. Philippidis,et al.  Fatigue life prediction in composites using progressive damage modelling under block and spectrum loading , 2011 .

[102]  F. Choy,et al.  Damage detection of carbon fiber reinforced polymer composites via electrical resistance measurement , 2011 .

[103]  W. Hufenbach,et al.  Experimentally based strategy for damage analysis of textile-reinforced composites under static loading , 2010 .

[104]  Francesco Aymerich,et al.  Impact damage detection in composite laminates using nonlinear acoustics , 2010 .

[105]  Ralph P. Tatam,et al.  Shearography technology and applications: a review , 2010 .

[106]  Pascal Reynaud,et al.  Acoustic emission and lifetime prediction during static fatigue tests on ceramic-matrix-composite at high temperature under air , 2010 .

[107]  Janice M. Dulieu-Barton,et al.  Assessment of fatigue damage evolution in woven composite materials using infra-red techniques , 2010 .

[108]  V. Dattoma,et al.  Fatigue damage evolution of fiber reinforced composites with digital image correlation analysis , 2010 .

[109]  Francesco Aymerich,et al.  Experimental Study of Impact-Damage Detection in Composite Laminates using a Cross-Modulation Vibro-Acoustic Technique , 2010 .

[110]  Christopher D. Stoik,et al.  Nondestructive evaluation of aircraft composites using reflective terahertz time domain spectroscopy , 2010 .

[111]  Rolf Lammering.  Observation of Piezoelectrically Induced Lamb Wave Propagation in Thin Plates by Use of Speckle Interferometry , 2010 .

[112]  Y. Kagawa,et al.  Dielectric properties of eight-harness-stain fabric glass fiber reinforced polyimide matrix composite in the THz frequency range , 2009 .

[113]  Y. Y. Hung,et al.  Review and comparison of shearography and active thermography for nondestructive evaluation , 2009 .

[114]  John J. Lesko,et al.  Modeling the variable amplitude fatigue of composite materials: A review and evaluation of the state of the art for spectrum loading , 2008 .

[115]  Michele Meo,et al.  Detecting Damage in Composite Material Using Nonlinear Elastic Wave Spectroscopy Methods , 2008 .

[116]  J. H. Thomas,et al.  Damage characterization of polymer-based composite materials: Multivariable analysis and wavelet transform for clustering acoustic emission data , 2008 .

[117]  Alexander Sutin,et al.  Time reversal and non-linear elastic wave spectroscopy (TR NEWS) techniques , 2008 .

[118]  O. Matar,et al.  Non-linear based time reversal acoustic applied to crack detection: Simulations and experiments , 2008 .

[119]  Robert F. Anastasi,et al.  Investigation of fiber waviness in a thick glass composite beam using THz NDE , 2008, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[120]  Christian Rasche,et al.  STRUCTURAL INTEGRITY EVALUATION OF CNG COMPOSITE CYLINDERS BY ACOUSTIC EMISSION MONITORING , 2008 .

[121]  Carlos E. S. Cesnik,et al.  Review of guided-wave structural health monitoring , 2007 .

[122]  Moussa Karama,et al.  Damage evolution and infrared thermography in woven composite laminates under fatigue loading , 2006 .

[123]  Hideo Kobayashi,et al.  Matrix crack detection of CFRP using electrical resistance change with integrated surface probes , 2006 .

[124]  Lin Ye,et al.  Guided Lamb waves for identification of damage in composite structures: A review , 2006 .

[125]  Bruce W. Drinkwater,et al.  Intra-laminar cracking in CFRP laminates: observations and modelling , 2006 .

[126]  Antonino Squillace,et al.  Non-destructive evaluation of aerospace materials with lock-in thermography , 2006 .

[127]  David K. Hsu,et al.  Inspecting Composites with Airborne Ultrasound: Through Thick and Thin , 2006 .

[128]  Jaycee H. Chung,et al.  Method of sensing impact damage in carbon fiber polymer-matrix composite by electrical resistance measurement , 2006 .

[129]  N. Karpowicz,et al.  Damage and defect inspection with terahertz waves , 2006 .

[130]  P. Cawley.  Inspection of Composites - Current Status and Challenges , 2006 .

[131]  K. K. Borum.  Evaluation of the quality of thick fibre composites using immersion and air-coupled ultrasonic techniques , 2006 .

[132]  Giovanni Maria Carlomagno,et al.  Application of infrared thermography and geophysical methods for defect detection in architectural structures , 2005 .

[133]  Michele Meo,et al.  Nonlinear elastic wave spectroscopy identification of impact damage on a sandwich plate , 2005 .

[134]  Junji Takatsubo,et al.  Stiffness evaluation and damage identification in composite beam under tension using Lamb waves , 2005 .

[135]  Nathalie Godin,et al.  Integration of the Kohonen's self-organising map and k-means algorithm for the segmentation of the AE data collected during tensile tests on cross-ply composites , 2005 .

[136]  Y. Y. Hung,et al.  Shearography: An optical measurement technique and applications , 2005 .

[137]  K. Maslov,et al.  Ultrasonic Ply-by-Ply Detection of Matrix Cracks in Laminated Composites , 2005 .

[138]  Phil E. Irving,et al.  The electrical resistance response of continuous carbon fibre composite laminates to mechanical strain , 2004 .

[139]  Akira Todoroki,et al.  Electrical Resistance Change of Unidirectional CFRP Due to Applied Load , 2004 .

[140]  Jung-Ryul Lee,et al.  Application of grating shearography and speckle shearography to mechanical analysis of composite material , 2004 .

[141]  Akira Todoroki,et al.  Multi-prove electric potential change method for delamination monitoring of graphite/epoxy composite plates using normalized response surfaces , 2004 .

[142]  Nik Rajic,et al.  Principal component thermography for flaw contrast enhancement and flaw depth characterisation in composite structures , 2002 .

[143]  Farhad Ansari,et al.  Embedded fiber optic sensor for characterization of interface strains in FRP composite , 2002 .

[144]  R. Gaertner,et al.  Use of acoustic emission to identify damage modes in glass fibre reinforced polyester , 2002 .

[145]  Akira Todoroki,et al.  Delamination monitoring of graphite/epoxy laminated composite plate of electric resistance change method , 2002 .

[146]  G. Busse,et al.  CAN: an example of nonclassical acoustic nonlinearity in solids. , 2002, Ultrasonics.

[147]  I. Solodov,et al.  DC effects, sub-harmonics, stochasticity and "memory" for contact acoustic non-linearity. , 2002, Ultrasonics.

[148]  V Yu Zaitsev,et al.  Observation of the "Luxemburg-Gorky effect" for elastic waves. , 2002, Ultrasonics.

[149]  Akira Todoroki,et al.  Delamination identification of cross-ply graphite/epoxy composite beams using electric resistance change method , 2002 .

[150]  Akira Todoroki,et al.  Measurement of orthotropic electric conductance of CFRP laminates and analysis of the effect on delamination monitoring with an electric resistance change method , 2002 .

[151]  T. Franz.  Photoelastic study of the mechanic behaviour of orthotropic composite plates subjected to impact , 2001 .

[152]  Paul L. Rosin,et al.  Neural fuzzy analysis of delaminated composites from shearography imaging , 2001 .

[153]  Akira Todoroki,et al.  The effect of number of electrodes and diagnostic tool for monitoring the delamination of CFRP laminates by changes in electrical resistance , 2001 .

[154]  Graham T. Reed,et al.  Interaction between optical fibre sensors and matrix cracks in cross-ply GRP laminates—part 1: passive optical fibres , 2001 .

[155]  Alexander Sutin,et al.  Micro-damage diagnostics using Nonlinear Elastic Wave Spectroscopy (NEWS) , 2001 .

[156]  Alexander Sutin,et al.  Nonlinear acoustic interaction on contact interfaces and its use for nondestructive testing , 2001 .

[157]  Karl Schulte,et al.  Non-destructive testing of FRP by d.c. and a.c. electrical methods , 2001 .

[158]  Shiv P. Joshi,et al.  Damage detection in CFRP by electrical conductivity mapping , 2001 .

[159]  G. Giraud,et al.  In-situ monitoring of damage in CFRP laminates by means of AC and DC measurements , 2001 .

[160]  Libo Yuan,et al.  Strain monitoring in FRP laminates and concrete beams using FBG sensors , 2001 .

[161]  Rhys Jones,et al.  Optical fibre sensors for health monitoring of bonded repair systems , 2000 .

[162]  Y. Y. Hung,et al.  Evaluating the soundness of bonding using shearography , 2000 .

[163]  Alexander L. Kalamkarov,et al.  Reliability assessment of pultruded FRP reinforcements with embedded fiber optic sensors , 2000 .

[164]  D.D.L. Chung,et al.  Piezoresistivity in continuous carbon fiber polymer‐matrix composite , 2000 .

[165]  K. E.-A. Van Den Abeele,et al.  Nonlinear Elastic Wave Spectroscopy (NEWS) Techniques to Discern Material Damage, Part I: Nonlinear Wave Modulation Spectroscopy (NWMS) , 2000 .

[166]  Antonino Risitano,et al.  Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components , 2000 .

[167]  X. E. Gros,et al.  NDT data fusion at pixel level , 1999 .

[168]  Farhad Ansari,et al.  Method and Theory for a Multi-Gauge Distributed Fiber Optic Crack Sensor , 1999 .

[169]  Joy P. Dunkers,et al.  Optical coherence tomography of glass reinforced polymer composites , 1999 .

[170]  Keiji Ogi,et al.  Eddy Current, Ultrasonic C-Scan and Scanning Acoustic Microscopy Testing of Delaminated Quasi-Isotropic CFRP Materials: A Case Study , 1998 .

[171]  Peter B. Nagy,et al.  Fatigue damage assessment by nonlinear ultrasonic materials characterization , 1998 .

[172]  Saibal Roy,et al.  Broadband ac conductivity of conductor-polymer composites , 1998 .

[173]  J. Pabiot,et al.  Integrated sensors for in-service health monitoring of glass/resin composites , 1998 .

[174]  Emmanuel Moulin,et al.  Piezoelectric transducer embedded in a composite plate: Application to Lamb wave generation , 1997 .

[175]  Koen Van Den Abeele,et al.  Elastic pulsed wave propagation in media with second‐ or higher‐order nonlinearity. Part I. Theoretical framework , 1996 .

[176]  Robert S. Frankle,et al.  Flexible ultrasonic array system for inspecting thick composite structures , 1995, Smart Structures.

[177]  P. Krawczak,et al.  Acoustic emission applied to glass fibre/organic thermosetting matrix interface characterization , 1994 .

[178]  G. Briggs,et al.  Acoustic microscopy of ceramic-fibre composites , 1993 .

[179]  G. Briggs,et al.  Acoustic microscopy of ceramic-fibre composites , 1993 .

[180]  K. Wapenaar,et al.  Non-destructive inspection of carbon fibre-reinforced plastics using eddy current methods , 1992 .

[181]  L. A. Martinez,et al.  Defects in Thick Composites and Some Methods to Locate Them , 1991 .

[182]  P. M. Sheaffer,et al.  NDE of Thick Composites in the Aerospace Industry — An Overview , 1991 .

[183]  J. Rhazi,et al.  Acoustic emission in carbon fibre composites , 1990 .

[184]  Karl Schulte,et al.  Load and failure analyses of CFRP laminates by means of electrical resistivity measurements , 1989 .

[185]  R. Prakash,et al.  Non-destructive testing of composites , 1980 .

[186]  T. Suzuki,et al.  Analysis of thickness-direction ultrasonic wave propagation of fiberglass reinforced plastics laminates , 1978 .

[187]  V. Vavilov.  Determining Limits of Thermal NDT of Thick Graphite/Epoxy Composites , 2022 .