Flow field optimization for proton exchange membrane fuel cells with varying channel heights and widths

The optimal cathode flow field design of a single serpentine proton exchange membrane fuel cell is obtained by adopting a combined optimization procedure including a simplified conjugate-gradient method (SCGM) and a completely three-dimensional, two-phase, non-isothermal fuel cell model. The cell output power density Pcell is the objective function to be maximized with channel heights, H1–H5, and channel widths, W2–W5 as search variables. The optimal design has tapered channels 1, 3 and 4, and diverging channels 2 and 5, producing 22.51% increment compared with the basic design with all heights and widths setting as 1 mm. Reduced channel heights of channels 2–4 significantly enhance sub-rib convection to effectively transport oxygen to and liquid water out of diffusion layer. The final diverging channel prevents significant leakage of fuel to outlet via sub-rib convection from channel 4. Near-optimal design without huge loss in cell performance but is easily manufactured is discussed.

[1]  T. Nguyen,et al.  Multicomponent transport in porous electrodes of proton exchange membrane fuel cells using the interdigitated gas distributors , 1999 .

[2]  Cheng-Hung Huang,et al.  An inverse geometry design problem in optimizing the shape of the gas channel for a proton exchange membrane fuel cell , 2009 .

[3]  Shou-Shing Hsieh,et al.  Characterization of the operational parameters of a H2/air micro PEMFC with different flow fields by impedance spectroscopy☆ , 2006 .

[4]  Wei Jiang,et al.  Parameter sensitivity examination and discussion of PEM fuel cell simulation model validation. Part I. Current status of modeling research and model development , 2006 .

[5]  Chao-Yang Wang,et al.  Fundamental models for fuel cell engineering. , 2004, Chemical reviews.

[6]  Ramana G. Reddy,et al.  Effect of channel dimensions and shape in the flow-field distributor on the performance of polymer electrolyte membrane fuel cells , 2003 .

[7]  Tianshou Zhao,et al.  A new flow field design for polymer electrolyte-based fuel cells , 2007 .

[8]  N. Djilali,et al.  Influence of heat transfer on gas and water transport in fuel cells , 2002 .

[9]  Xiao-Dong Wang,et al.  Numerical Simulation of Cell Performance in Proton Exchange Membrane Fuel Cells with Contracted Flow Field Design , 2008 .

[10]  Hua Meng,et al.  A two-phase non-isothermal mixed-domain PEM fuel cell model and its application to two-dimensional simulations , 2007 .

[11]  M. Prud’homme,et al.  On the iterative regularization of inverse heat conduction problems by conjugate gradient method , 1998 .

[12]  Duu-Jong Lee,et al.  Determination of the optimal active area for proton exchange membrane fuel cells with parallel, interdigitated or serpentine designs , 2009 .

[13]  Wei-Mon Yan,et al.  Numerical study of cell performance and local transport phenomena in PEM fuel cells with various flow channel area ratios , 2007 .

[14]  Sirivatch Shimpalee,et al.  The impact of channel path length on PEMFC flow-field design , 2006 .

[15]  Chaoyang Wang,et al.  Three-dimensional analysis of transport and electrochemical reactions in polymer electrolyte fuel cells , 2004 .

[16]  Trung Van Nguyen,et al.  A Gas Distributor Design for Proton‐Exchange‐Membrane Fuel Cells , 1996 .

[17]  Chin-Hsiang Cheng,et al.  Predictions of internal temperature distribution of PEMFC by non-destructive inverse method , 2005 .

[18]  Chin-Hsiang Cheng,et al.  A SIMPLIFIED CONJUGATE-GRADIENT METHOD FOR SHAPE IDENTIFICATION BASED ON THERMAL DATA , 2003 .

[19]  T. Fuller,et al.  Influence of rib spacing in proton-exchange membrane electrode assemblies , 1996 .

[20]  T. Fuller,et al.  Water and Thermal Management in Solid‐Polymer‐Electrolyte Fuel Cells , 1993 .

[21]  Jack S. Brenizer,et al.  Quantification of liquid water accumulation and distribution in a polymer electrolyte fuel cell using neutron imaging , 2006 .

[22]  Suk Won Cha,et al.  The scaling behavior of flow patterns: a model investigation , 2004 .

[23]  Xianguo Li,et al.  Modelling of polymer electrolyte membrane fuel cells with variable degrees of water flooding , 2000 .

[24]  C. Min,et al.  Performance of a proton exchange membrane fuel cell with a stepped flow field design , 2009 .

[25]  Mark W. Verbrugge,et al.  A Mathematical Model of the Solid‐Polymer‐Electrolyte Fuel Cell , 1992 .

[26]  Frano Barbir,et al.  An Analytical Solution of a Half‐Cell Model for PEM Fuel Cells , 2000 .

[27]  Chin‐Hsiang Cheng,et al.  Non-destructive inverse method for determination of irregular internal temperature distribution in PEMFCs , 2005 .

[28]  S. H. Huang,et al.  A novel ribbed cathode polar plate design in piezoelectric proton exchange membrane fuel cells , 2008 .

[29]  N. Jenkins,et al.  Proton exchange membrane (PEM) fuel cell stack configuration using genetic algorithms , 2004 .

[30]  S. Dutta,et al.  Numerical prediction of mass-exchange between cathode and anode channels in a PEM fuel cell , 2001 .

[31]  Optimum beam design using finite elements , 1996 .

[32]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[33]  Jiujun Zhang,et al.  A review of water flooding issues in the proton exchange membrane fuel cell , 2008 .

[34]  Sirivatch Shimpalee,et al.  Numerical studies on rib & channel dimension of flow-field on PEMFC performance , 2007 .

[35]  Ned Djilali,et al.  A two-dimensional analysis of mass transport in proton exchange membrane fuel cells , 1999 .

[36]  Tatsuhiro Okada,et al.  Simulation for water management in membranes for polymer electrolyte fuel cells , 1998 .

[37]  Wei-Mon Yan,et al.  Novel serpentine-baffle flow field design for proton exchange membrane fuel cells , 2007 .

[38]  Pan-Chio Tuan, Ming-Ching Ju,et al.  THE VALIDATION OF THE ROBUST INPUT ESTIMATION APPROACH TO TWO-DIMENSIONAL INVERSE HEAT CONDUCTION PROBLEMS , 2000 .

[39]  Jenn-Jiang Hwang,et al.  A complete two-phase model of a porous cathode of a PEM fuel cell , 2007 .

[40]  Wei-Mon Yan,et al.  Local transport phenomena and cell performance of PEM fuel cells with various serpentine flow field designs , 2008 .