Early-stage evaluation of catalyst manufacturing cost and environmental impact using CatCost

[1]  Damon S. Hartley,et al.  Ex Situ Catalytic Fast Pyrolysis of Lignocellulosic Biomass to Hydrocarbon Fuels: 2020 State of Technology , 2021 .

[2]  Mary Biddy,et al.  Techno-economic analysis for co-processing fast pyrolysis liquid with vacuum gasoil in FCC units for second-generation biofuel production , 2021 .

[3]  B. Patil.  Engineering catalysis , 2020, Focus on Catalysts.

[4]  Shelie A. Miller,et al.  The Need for and Path to Harmonized Life Cycle Assessment and Techno‐Economic Assessment for Carbon Dioxide Capture and Utilization , 2020, Energy Technology.

[5]  Damon S. Hartley,et al.  Ex Situ Catalytic Fast Pyrolysis of Lignocellulosic Biomass to Hydrocarbon Fuels: 2019 State of Technology and Future Research , 2020 .

[6]  A. Kendall,et al.  Understanding the future of lithium: Part 2, temporally and spatially resolved life‐cycle assessment modeling , 2019, Journal of Industrial Ecology.

[7]  M. Toivakka,et al.  Synthesis and Physicochemical Characterization of Shaped Catalysts of β and Y Zeolites for Cyclization of Citronellal , 2019, Industrial & Engineering Chemistry Research.

[8]  Mariefel V. Olarte,et al.  Technology advancements in hydroprocessing of bio-oils , 2019, Biomass and Bioenergy.

[9]  Damon S. Hartley,et al.  Ex Situ Catalytic Fast Pyrolysis of Lignocellulosic Biomass to Hydrocarbon Fuels: 2018 State of Technology and Future Research , 2018 .

[10]  Eric C. D. Tan,et al.  Driving towards cost-competitive biofuels through catalytic fast pyrolysis by rethinking catalyst selection and reactor configuration , 2018 .

[11]  Lesley J. Snowden-Swan,et al.  Estimating Precommercial Heterogeneous Catalyst Price: A Simple Step-Based Method , 2018, Organic Process Research & Development.

[12]  Susannah L. Scott,et al.  A Matter of Life(time) and Death , 2018, ACS Catalysis.

[13]  Joshua A. Schaidle,et al.  Production of low-oxygen bio-oil via ex situ catalytic fast pyrolysis and hydrotreating , 2017 .

[14]  Yuriy Román‐Leshkov,et al.  Encapsulation of Molybdenum Carbide Nanoclusters inside Zeolite Micropores Enables Synergistic Bifunctional Catalysis for Anisole Hydrodeoxygenation , 2017 .

[15]  M. Heben,et al.  Environmental Impacts from Photovoltaic Solar Cells Made with Single Walled Carbon Nanotubes. , 2017, Environmental science & technology.

[16]  A. Bhan,et al.  Mo2C Modification by CO2, H2O, and O2: Effects of Oxygen Content and Oxygen Source on Rates and Selectivity of m-Cresol Hydrodeoxygenation , 2017 .

[17]  Sandra Carey,et al.  International Molybdenum Association (IMOA) life cycle assessment program and perspectives on the LCA harmonization effort , 2016, The International Journal of Life Cycle Assessment.

[18]  Kara G. Cafferty,et al.  Field-to-Fuel Performance Testing of Lignocellulosic Feedstocks for Fast Pyrolysis and Upgrading: Techno-economic Analysis and Greenhouse Gas Life Cycle Analysis , 2016 .

[19]  Thomas Bligaard,et al.  Toward Benchmarking in Catalysis Science: Best Practices, Challenges, and Opportunities , 2016 .

[20]  L. Snowden‐Swan,et al.  Life cycle greenhouse gas emissions analysis of catalysts for hydrotreating of fast pyrolysis bio-oil , 2016 .

[21]  Qi Dang,et al.  Comparative techno-economic analysis of advanced biofuels, biochemicals, and hydrocarbon chemicals via the fast pyrolysis platform , 2016 .

[22]  W. R. Morrow,et al.  Unit Price Scaling Trends for Chemical Products , 2015 .

[23]  Abhijit Dutta,et al.  Process Design and Economics for the Conversion of Lignocellulosic Biomass to Hydrocarbon Fuels: Thermochemical Research Pathways with In Situ and Ex Situ Upgrading of Fast Pyrolysis Vapors , 2015 .

[24]  Mary J. Biddy,et al.  Process Design and Economics for the Conversion of Lignocellulosic Biomass to Hydrocarbons via Indirect Liquefaction. Thermochemical Research Pathway to High-Octane Gasoline Blendstock Through Methanol/Dimethyl Ether Intermediates , 2015 .

[25]  Yong Wang,et al.  Catalytic fast pyrolysis of lignocellulosic biomass. , 2014, Chemical Society reviews.

[26]  Juha Lehtonen,et al.  Product quality and catalyst deactivation in a four day catalytic fast pyrolysis production run , 2014 .

[27]  L. Moens,et al.  Recent Advances in Heterogeneous Catalysts for Bio‐Oil Upgrading via “ex situ Catalytic Fast Pyrolysis”: Catalyst Development Through the Study of Model Compounds , 2014 .

[28]  Jane C. Bare,et al.  Updated US and Canadian normalization factors for TRACI 2.1 , 2014, Clean Technologies and Environmental Policy.

[29]  Jun Wang,et al.  Recent advances in heterogeneous catalysts for bio-oil upgrading via “ex situ catalytic fast pyrolysis”: catalyst development through the study of model compounds , 2014 .

[30]  Fabio Menten,et al.  A review of LCA greenhouse gas emissions results for advanced biofuels: The use of meta-regression analysis , 2013 .

[31]  Sharon Mitchell,et al.  From powder to technical body: the undervalued science of catalyst scale up. , 2013, Chemical Society reviews.

[32]  Fabio Menten,et al.  The use of Meta-Regression Analysis to harmonize LCA literature: an application to GHG emissions of 2nd and 3rd generation biofuels , 2013 .

[33]  J. R. Hess,et al.  Process Design and Economics for Conversion of Lignocellulosic Biomass to Ethanol: Thermochemical Pathway by Indirect Gasification and Mixed Alcohol Synthesis , 2011 .

[34]  Akshay D. Patel,et al.  Techno-economic analysis of dimethylfuran (DMF) and hydroxymethylfurfural (HMF) production from pure fructose in catalytic processes , 2011 .

[35]  J. Woodley,et al.  Guidelines and Cost Analysis for Catalyst Production in Biocatalytic Processes , 2011 .

[36]  Jane C. Bare,et al.  TRACI 2.0: the tool for the reduction and assessment of chemical and other environmental impacts 2.0 , 2011 .

[37]  Magnus Fröhling,et al.  Techno-Economic Analysis of Fast Pyrolysis as a Process Step Within Biomass-to-Liquid Fuel Production , 2010 .

[38]  John D. Super.  The Precious Metal Loop, Costs from an Operating Company Perspective , 2010 .

[39]  Mario Schmidt,et al.  The Sankey Diagram in Energy and Material Flow Management , 2008 .

[40]  J. Armor.  Do you really have a better catalyst , 2005 .

[41]  Marcel Schreier,et al.  A fundamental study of Pt tetraammine impregnation of silica: 1. The electrostatic nature of platinum adsorption , 2004 .

[42]  Marcel Schreier,et al.  A fundamental study of platinum tetraammine impregnation of silica: 2. The effect of method of preparation, loading, and calcination temperature on (reduced) particle size , 2004 .

[43]  G. Norris.  Impact Characterization in the Tool for the Reduction and Assessment of Chemical and Other Environmental Impacts , 2002 .

[44]  J. Bare.  Traci , 2002 .

[45]  B. Engler,et al.  Forming of high surface area TiO2 to catalyst supports , 1992 .

[46]  Thomas L. Saaty,et al.  How to Make a Decision: The Analytic Hierarchy Process , 1990 .

[47]  Donald E. Garrett,et al.  Chemical Engineering Economics , 1989 .

[48]  Gael D. Ulrich,et al.  A Guide to Chemical Engineering Process Design and Economics , 1984 .

[49]  N. V. Kuzichkin.  On comprehensive understanding of catalyst shaping by extrusion , 2016 .

[50]  Eric C. D. Tan,et al.  Conceptual process design and economics for the production of high‐octane gasoline blendstock via indirect liquefaction of biomass through methanol/dimethyl ether intermediates , 2016 .

[51]  Abhijit Dutta,et al.  Conceptual Process Design and Techno-Economic Assessment of Ex Situ Catalytic Fast Pyrolysis of Biomass: A Fixed Bed Reactor Implementation Scenario for Future Feasibility , 2015, Topics in Catalysis.

[52]  Yoshimitsu Kobayashi,et al.  Technology Roadmap Energy and GHG Reductions in the Chemical Industry via Catalytic Processes , 2013 .

[53]  John Anderson,et al.  Communicating the Cost of Product and Process Development , 2010 .

[54]  John C. Anderson,et al.  Determining Manufacturing Costs , 2008 .

[55]  Gavin Towler,et al.  Chemical engineering design : principles, practice, and economics of plant and process design , 2008 .

[56]  M F Drummond,et al.  Economic evaluation. , 2006, Singapore medical journal.

[57]  M. Bohanec,et al.  The Analytic Hierarchy Process , 2004 .

[58]  D. Hairston,et al.  Estimating product costs , 2000 .

[59]  Don W. Green,et al.  Perry's chemical engineers' handbook. 7th ed. , 1997 .

[60]  Klaus D. Timmerhaus,et al.  Plant design and economics for chemical engineers , 1958 .