Material uncertainty propagation in helicopter nonlinear aeroelastic response and vibration analysis

The effect of uncertainty in composite material properties on the nonlinear aeroelastic response and vibratory loads of a four-bladed composite helicopter rotor is studied. The aeroelastic analysis is done using a finite element method in space and time, and the composite cross section is analyzed using a variational asymptotic approach. The effective material properties of composite laminas are first considered as random variables with a coefficient of variation of 5%. The material uncertainty is propagated to cross-sectional stiffness,rotating natural frequencies, aeroelastic response, and vibratory loadsof the composite helicopter rotor. The stochastic cross-sectional and aeroelastic analyses are carried out with Monte Carlo simulations. The stochastic stiffness values are scattered up to 15% around the baseline stiffness values and show a Gaussian distribution with a coefficient of variation of about 4%. The uncertainty impact on rotating natural frequencies depends on the level of centrifugal stiffening for different modes. The stochastic rotating natural frequencies indicate a possibility of their coincidence with the integer multiples of rotor speed. The propagation of material uncertainty into aeroelastic response causes large deviations from the baseline predictions and affects the crucial higher harmonics content, which is critical for vibration predictions. The magnitudes of 4/rev vibratory loads show a scattering up to 300% from the baseline value,and their probability density functions show non-Gaussian-type distributions. Further, the uncertainty results for a coefficient of variation of 10% in the material properties are obtained. The uncertainty impact on the aeroelastic response is found to be proportional to the coefficient of variation of the composite material properties.

[1]  Raphael T. Haftka,et al.  Response Surface Approximations for Cost Optimization of Dropped Ply Composite Laminates with Uncertainty , 1998 .

[2]  Inderjit Chopra,et al.  Aeroelastic optimization of a helicopter rotor with two-cell composite blades , 1996 .

[3]  Ahsan Kareem,et al.  Aerodynamic response of structures with parametric uncertainties , 1988 .

[4]  Ramana V. Grandhi,et al.  Optimization of a wing structure for gust response and aileron effectiveness , 2003 .

[5]  N.G.R. Iyengar,et al.  Free vibration of composite cylindrical panels with random material properties , 2002 .

[6]  David A. Peters,et al.  Optimization of composite rotor blades with advanced structural and aerodynamic modeling , 1994 .

[7]  D. Yadav,et al.  Stochastic Finite Element Buckling Analysis of Laminated Plates With Circular Cutout Under Uniaxial Compression , 2007 .

[8]  Ramana V. Grandhi,et al.  Uncertainty Quantification of Structural Response Using Evidence Theory , 2002 .

[9]  Jin Cheng,et al.  Aerostatic stability analysis of suspension bridges under parametric uncertainty , 2003 .

[10]  Michał Kleiber,et al.  The Stochastic Finite Element Method: Basic Perturbation Technique and Computer Implementation , 1993 .

[11]  Fabrice Poirion,et al.  On some stochastic methods applied to aeroservoelasticity , 2000 .

[12]  Dimitri N. Mavris,et al.  Robust Design Simulation: A Probabilistic Approach to Multidisciplinary Design , 1999 .

[13]  Ranjan Ganguli,et al.  Aeroelastic Stability Enhancement and Vibration Suppression in a Composite Helicopter Rotor , 2005 .

[14]  Ivo Babuška,et al.  Damage analysis of fiber composites Part I: Statistical analysis on fiber scale , 1999 .

[15]  Achintya Haldar,et al.  Reliability Assessment Using Stochastic Finite Element Analysis , 2000 .

[16]  Ranjan Ganguli,et al.  Survey of Recent Developments in Rotorcraft Design Optimization , 2004 .

[17]  Rakesh K. Kapania,et al.  Free vibration of unsymmetrically laminated beams having uncertain ply orientations , 2002 .

[18]  Edward C. Smith,et al.  Vibration and flutter of stiff-inplane elastically tailored composite rotor blades , 1993 .

[19]  Edward C. Smith,et al.  Aeroelastic response, loads, and stability of a composite rotor in forward flight , 1993 .

[20]  Sung Nam Jung,et al.  Structural Behavior of Thin- and Thick-Walled Composite Blades with Multicell Sections , 2002 .

[21]  Wenbin Yu,et al.  Variational asymptotic modeling of composite dimensionally reducible structures , 2002 .

[22]  Peretz P. Friedmann,et al.  Rotary-wing aeroelasticity - Current status and future trends , 2001 .

[23]  Anubhav Datta,et al.  Validation and Understanding of UH-60A Vibratory Loads in Steady Level Flight , 2002 .

[24]  Ramana V. Grandhi,et al.  Reliability-based Structural Design , 2006 .

[25]  Ranjan Ganguli,et al.  Aeroelastic Response of Composite Helicopter Rotor with Random Material Properties , 2008 .

[26]  D. Hodges,et al.  Validation of the Variational Asymptotic Beam Sectional Analysis , 2002 .

[27]  Inderjit Chopra,et al.  Comparison of Calculated Vibratory Rotor Hub Loads with Experimental Data , 1998 .

[28]  R. Grandhi,et al.  Polynomial Chaos Expansion with Latin Hypercube Sampling for Estimating Response Variability , 2003 .

[29]  D. Yadav,et al.  Non-linear response statistics of composite laminates with random material properties under random loading , 2003 .

[30]  Chris L. Pettit,et al.  Uncertainty Quantification in Aeroelasticity: Recent Results and Research Challenges , 2004 .

[31]  Earl H. Dowell,et al.  Stochastic Analysis of a Nonlinear Aeroelastic Model Using the Response Surface Method , 2006 .

[32]  Carlos E. S. Cesnik,et al.  VABS: A New Concept for Composite Rotor Blade Cross-Sectional Modeling , 1995 .