Shape estimation of IPMC actuators in ionic solutions using hyper redundant kinematic modeling

Abstract Ionic Polymer Metal Composites (IPMCs) has established itself as an ionomer rendering wide-ranging applications spanning the paradigm of robotics to medical appliances, thereby drawing significant research interests. Prior studies to characterize IPMCs have been conducted over several years but efforts on its kinematic modeling have remained inchoate. The bending profile of IPMC changes when placed in different ionic solutions. The IPMC trace along with its tip location characterizes its complete behavior upon low level actuation. This article aims at identifying the bending patterns of an IPMC actuator, decomposing it as a 20-link hyper-redundant serial manipulator. The Tractrix based inverse kinematics engine is used to study the polymer profile in distilled water, 1.5 N LiCl and NaCl solutions respectively. The proposed algorithm yields a natural curve (Tractrix) which resembles the profile traced by an actuated IPMC strip — enabling its use in potential applications which would require a foresight of the actuator workspace.

[1]  K. Kim,et al.  The effect of surface-electrode resistance on the performance of ionic polymer-metal composite (IPMC) artificial muscles , 2000 .

[2]  Nadia Naghavi,et al.  Nonlinear identification of IPMC actuators based on ANFIS–NARX paradigm , 2014 .

[3]  G. Alici,et al.  Performance Quantification of Conducting Polymer Actuators for Real Applications: A Microgripping System , 2007, IEEE/ASME Transactions on Mechatronics.

[4]  Subhasis Bhaumik,et al.  IPMC-Actuated Compliant Mechanism-Based Multifunctional Multifinger Microgripper , 2014 .

[5]  Frédéric Boyer,et al.  Macro-continuous computed torque algorithm for a three-dimensional eel-like robot , 2006, IEEE Transactions on Robotics.

[6]  Wen-Pin Shih,et al.  Effects of water content on the actuation performance of ionic polymer–metal composites , 2010 .

[7]  Ritwik Chattaraj,et al.  Design and control of two fingered compliant gripper for micro gripping , 2014, 2014 International Conference on Informatics, Electronics & Vision (ICIEV).

[8]  Andrew McDaid,et al.  Gain scheduled control of IPMC actuators with ‘model-free’ iterative feedback tuning , 2010 .

[9]  Subhasis Bhaumik,et al.  Novel approach of IPMC actuated finger for micro-gripping , 2015, 2015 International Conference on Informatics, Electronics & Vision (ICIEV).

[10]  Hoon Cheol Park,et al.  Performance Improvement of IPMC (Ionic Polymer Metal Composites) for a Flapping Actuator , 2006 .

[11]  Ritwik Chattaraj,et al.  Gesture based control of IPMC actuated gripper , 2014, 2014 Recent Advances in Engineering and Computational Sciences (RAECS).

[12]  K. Kim,et al.  Ionic polymer-metal composites: I. Fundamentals , 2001 .

[13]  Ritwik Chattaraj,et al.  Simultaneous parametric optimization of IPMC actuator for compliant gripper , 2015 .

[14]  Min Yu,et al.  Manufacture and performance of ionic polymer-metal composites , 2007 .

[15]  Shoichi Iikura,et al.  Development of flexible microactuator and its applications to robotic mechanisms , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[16]  G. Alici,et al.  Validation of Resonant Frequency Model for Polypyrrole Trilayer Actuators , 2008, IEEE/ASME Transactions on Mechatronics.

[17]  Ian D. Walker,et al.  Analysis and initial experiments for a novel elephant's trunk robot , 2000, Proceedings. 2000 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2000) (Cat. No.00CH37113).

[18]  Subrata Rakshit,et al.  Redundancy Resolution Using Tractrix—Simulations and Experiments , 2009 .

[19]  Tamar Flash,et al.  Dynamic model of the octopus arm. II. Control of reaching movements. , 2005, Journal of neurophysiology.

[20]  G. Alici.  An effective modelling approach to estimate nonlinear bending behaviour of cantilever type conducting polymer actuators , 2009 .

[21]  Kinji Asaka,et al.  Recent advances in ionic polymer–metal composite actuators and their modeling and applications , 2013 .

[22]  Gursel Alici,et al.  Kinematic modeling for artificial flagellum of a robotic bacterium based on electroactive polymer actuators , 2011, 2011 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM).

[23]  M. Safari,et al.  The enhancement effect of lithium ions on actuation performance of ionic liquid-based IPMC soft actuators , 2015 .

[24]  Sung-hoon Ahn,et al.  A review on IPMC material as actuators and sensors: Fabrications, characteristics and applications , 2012 .

[25]  Luigi Fortuna,et al.  Static and Dynamic Characterization of the Temperature and Humidity Influence on IPMC Actuators , 2010, IEEE Transactions on Instrumentation and Measurement.

[26]  Kyehan Rhee,et al.  Modeling of bending behavior of IPMC beams using concentrated ion boundary layer , 2009 .

[27]  Actuation and Sensing Studies of a Miniaturized Five Fingered Robotic Hand Made with Ion Polymeric Metal Composite (IPMC) , 2013 .