Granulation by Roller Compaction and Enteric Coated Tablet Formulation of the Extract of the Seeds of Glinus Lotoides Loaded on Aeroperl® 300 Pharma

The purpose of this research was to improve the hygrpscopicity and poor flow properties of the crude dry extract of the seeds of Glinus lotoides and improve the disintegration time of the core-tablets for enteric coated formulation thereof. The liquid crude extract of the plant was adsorbed on granulated colloidal silicon dioxide (Aeroperl® 300 Pharma) at 30% w/w and the dry extract preparation (DEP) was dry-granulated with roller-compaction using Micro-Pactor®. Hygroscopicity, flow property and disintegration time were improved significantly due to the adsorption and granulation processes. Moreover, the DEP does not become mucilaginous even at higher relative humidity levels (above 65%). Oblong tablets (20 × 8.25 mm) containing 947 mg of the granulated DEP (equivalent to the traditional dose), 363 mg of Avicel® PH101 and 90 mg of Ac-di-Sol® as disintegrant were formulated using an instrumented eccentric tablet machine at 20 kN. The tablets showed a crushing strength of 195 N, a friability of 0.4% and disintegrated within 9 min. The tablets were then enteric coated using polymethacrylate co-polymers (Eudragit® L 100-55 and Kollicoat® MAE 100P). The coated tablets resisted disintegration or softening in simulated gastric fluid for a minimum of 2 h and disintegrated within 15 min in intestine simulated fluid at pH 6.8. In addition to controlling the release of the active agents, the enteric coating improved the strength and decreased friability of the core-tablets.