A dislocation density–based comparative study of grain refinement, residual stresses, and surface roughness induced by shot peening and surface mechanical attrition treatment

[1]  Chuanli Wang,et al.  Dislocation-based study on the influences of shot peening on fatigue resistance , 2020 .

[2]  Chuan Wang,et al.  Dislocation density-based study of grain refinement induced by laser shock peening , 2020 .

[3]  R. Parker,et al.  Investigation on the effect of shot peening coverage on the surface integrity , 2019, Applied Surface Science.

[4]  X. Xiao,et al.  A design for lumped mass of a shot model in random peening simulation and prediction of dimple size evolution , 2019, The International Journal of Advanced Manufacturing Technology.

[5]  B. Ducharne,et al.  Investigation of surface induced-residual stresses due to shot peening using needle probes technique , 2019 .

[6]  H. Soyama.  Comparison between the improvements made to the fatigue strength of stainless steel by cavitation peening, water jet peening, shot peening and laser peening , 2019, Journal of Materials Processing Technology.

[7]  D. A. Desai,et al.  Literature review of numerical simulation and optimisation of the shot peening process , 2019, Advances in Mechanical Engineering.

[8]  R. Ritchie,et al.  Predicting surface deformation during mechanical attrition of metallic alloys , 2019, npj Computational Materials.

[9]  R. Miresmaeili,et al.  Hardness and wear behavior of surface mechanical attrition treated titanium , 2019, Materials Research Express.

[10]  Y. Murakami,et al.  Defects as a root cause of fatigue failure of metallic components. III: Cavities, dents, corrosion pits, scratches , 2019, Engineering Failure Analysis.

[11]  Zhidan Sun,et al.  Investigation of ductile damage during surface mechanical attrition treatment for TWIP steels using a dislocation density based viscoplasticity and damage models , 2019, Mechanics of Materials.

[12]  Zhou Wang,et al.  The study of universality of a method for predicting surface nanocrystallization after high energy shot peening based on finite element analysis , 2019, Surface and Coatings Technology.

[13]  Xin Wang,et al.  Effect of shot peening coverage on residual stress field and surface roughness , 2018 .

[14]  J. Zhou,et al.  Reconstruction of residual stress and work hardening and their effects on the mechanical behaviour of a shot peened structure , 2018, Mechanics of Materials.

[15]  A. Amanov,et al.  Novel experimental methods for the determination of the boundaries between conventional, severe and over shot peening processes , 2018, Surfaces and Interfaces.

[16]  S. Ehlers,et al.  Fatigue life enhancement of TIG-welded 304L stainless steels by shot peening , 2018, The International Journal of Advanced Manufacturing Technology.

[17]  Cheng Wang,et al.  Numerical study of grain refinement induced by severe shot peening , 2018, International Journal of Mechanical Sciences.

[18]  J. Zhou,et al.  Comparative study of the effects of surface mechanical attrition treatment and conventional shot peening on low cycle fatigue of a 316L stainless steel , 2018, Surface and Coatings Technology.

[19]  L. Hou,et al.  Evolution of grain refinement mechanism in Cu-4wt.%Ti alloy during surface mechanical attrition treatment , 2018, Journal of Alloys and Compounds.

[20]  Ming Chen,et al.  Evaluation of the residual stress and microstructure character in SAF 2507 duplex stainless steel after multiple shot peening process , 2018, Surface and Coatings Technology.

[21]  Kazem Reza Kashyzadeh,et al.  Effects of conventional, severe, over, and re-shot peening processes on the fatigue behavior of mild carbon steel , 2018, Surface and Coatings Technology.

[22]  P. Bocher,et al.  Surface characteristics and fatigue behavior of shot peened Inconel 718 , 2018 .

[23]  S. Virtanen,et al.  Severe shot peening of AISI 321 with 1 000 % and 1 300 % coverages: A comparative study on the surface nanocrystallization, phase transformation, sub-surface microcracks, and microhardness , 2018 .

[24]  Rongqiao Wang,et al.  Experimental and Numerical Analysis of Microstructures and Stress States of Shot-Peened GH4169 Superalloys , 2018, Metallurgical and Materials Transactions A.

[25]  P. Gilles,et al.  Finite element multi-impact simulations using a crystal plasticity law based on dislocation dynamics , 2018 .

[26]  R. Fathallah,et al.  Probabilistic methodology for predicting the dispersionof residual stresses and Almen intensity considering shot peening process uncertainties , 2018 .

[27]  S. Virtanen,et al.  Correlation between the surface coverage of severe shot peening and surface microstructural evolutions in AISI 321: A TEM, FE-SEM and GI-XRD study , 2018 .

[28]  T. Webster,et al.  Effects of nanofeatures induced by severe shot peening (SSP) on mechanical, corrosion and cytocompatibility properties of magnesium alloy AZ31. , 2017, Acta biomaterialia.

[29]  T. Webster,et al.  Nanofeatures Induced by Severe Shot Peening (SSP) on Magnesium Alloy AZ31 , 2017, 1712.02834.

[30]  Xin Wang,et al.  Gradient Structured Copper by Rotationally Accelerated Shot Peening , 2017 .

[31]  Jenn‐Ming Yang,et al.  Integration of Heat Treatment with Shot Peening of 17-4 Stainless Steel Fabricated by Direct Metal Laser Sintering , 2017 .

[32]  Cheng Wang,et al.  Simulation on Residual Stress of Shot Peening Based on a Symmetrical Cell Model , 2017 .

[33]  S. Bagherifard,et al.  Incorporating the principles of shot peening for a better understanding of surface mechanical attrition treatment (SMAT) by simulations and experiments , 2017 .

[34]  C. Jiang,et al.  Effect of Shot Peening on Residual Stress and Microstructure in the Deformed Layer of Inconel 625 , 2017 .

[35]  S. Bahl,et al.  Elucidating microstructural evolution and strengthening mechanisms in nanocrystalline surface induced by surface mechanical attrition treatment of stainless steel , 2017 .

[36]  Jenn‐Ming Yang,et al.  Improving the surface quality and mechanical properties by shot-peening of 17-4 stainless steel fabricated by additive manufacturing , 2016 .

[37]  A. Ghasemi,et al.  Shot peening coverage effect on residual stress profile by FE random impact analysis , 2016 .

[38]  Zengliang Gao,et al.  Numerical modeling of the confined laser shock peening of the OFHC copper , 2016 .

[39]  A. Ghasemi,et al.  A comprehensive experimental and numerical study on redistribution of residual stresses by shot peening , 2016 .

[40]  Xiaohua Yu,et al.  Effect of surface mechanical attrition treatment on corrosion resistance of commercial pure titanium , 2015 .

[41]  M. Guagliano,et al.  Experimental assessment and simulation of surface nanocrystallization by severe shot peening , 2015 .

[42]  D. Nélias,et al.  A methodology to predict the roughness of shot peened surfaces , 2015 .

[43]  Lin Xiao,et al.  Effect of Surface Nanocrystallization on Fatigue Behavior of Pure Titanium , 2015, Journal of Materials Engineering and Performance.

[44]  M. Laleh,et al.  Effect of treatment time on characterization and properties of nanocrystalline surface layer in copper induced by surface mechanical attrition treatment , 2014, Bulletin of Materials Science.

[45]  Yung C. Shin,et al.  Dislocation Density-Based Grain Refinement Modeling of Orthogonal Cutting of Titanium , 2014 .

[46]  Y. Estrin,et al.  Extreme grain refinement by severe plastic deformation: A wealth of challenging science , 2013 .

[47]  Cheng Jin,et al.  Study on the Plastic Strain Rate and Its Effect on Surface Nanocrystallization During Shot Peening , 2012 .

[48]  Mario Guagliano,et al.  Numerical and experimental analysis of surface roughness generated by shot peening , 2012 .

[49]  Yung C. Shin,et al.  Dislocation density-based modeling of subsurface grain refinement with laser-induced shock compression , 2012 .

[50]  Wang Ren-zhi.  Overview on the Shot Peening Principle and Its Strengshening Mechanisms for Metallic Materials , 2012 .

[51]  S. M. Srinivasan,et al.  Numerical simulation of Almen strip response due to random impacts with strain-rate effects , 2011 .

[52]  P. Jiang,et al.  Grain Refinement of Pure Ti During Plastic Deformation , 2010 .

[53]  H. Chan,et al.  Optimization of the strain rate to achieve exceptional mechanical properties of 304 stainless steel using high speed ultrasonic surface mechanical attrition treatment , 2010 .

[54]  Y. Estrin,et al.  Grain refinement under high strain rate impact: A numerical approach , 2010 .

[55]  A. L. Ortiz,et al.  Experimental study of the microstructure and stress state of shot peened and surface mechanical attrition treated nickel alloys , 2010 .

[56]  Hyungyil Lee,et al.  An area-average approach to peening residual stress under multi-impacts using a three-dimensional symmetry-cell finite element model with plastic shots , 2010 .

[57]  Yu Wang,et al.  Improved Fatigue Behavior of Pipeline Steel Welded Joint by Surface Mechanical Attrition Treatment (SMAT) , 2009 .

[58]  Martin Lévesque,et al.  On the potential applications of a 3D random finite element model for the simulation of shot peening , 2009, Adv. Eng. Softw..

[59]  Ping Liu,et al.  Microstructural characterization of nanocrystalline nickel produced by surface mechanical attrition treatment , 2009 .

[60]  Y. Estrin,et al.  The influence of back pressure on ECAP processed AA 6016 : Modeling and experiment , 2007 .

[61]  Y. Estrin,et al.  Modelling microstructure evolution toward ultrafine crystallinity produced by severe plastic deformation , 2007 .

[62]  V. Schulze,et al.  Finite Element Simulation of the Residual Stress States after Shot Peening , 2006 .

[63]  Jian Lu,et al.  Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment , 2004 .

[64]  S. Nemat-Nasser,et al.  Mechanical properties and deformation mechanisms of a commercially pure titanium , 1999 .

[65]  Laszlo S. Toth,et al.  A dislocation-based model for all hardening stages in large strain deformation , 1998 .

[66]  Yuri Estrin,et al.  Dislocation Theory Based Constitutive Modelling: Foundations and Applications , 1998 .

[67]  N. M. Ghoniem,et al.  A review of experimental observations and theoretical models of dislocation cells and subgrains , 1988 .