Development of cube-type SOFC stacks using anode-supported tubular cells

Abstract Tubular SOFCs have shown many desirable characteristics such as high thermal stability during rapid heat cycling and large electrode area per unit volume, which can accelerate to realize SOFC systems applicable to portable devices and auxiliary power units for automobile. So far, we have developed anode-supported tubular SOFCs with 0.8–2 mm diameter using Gd-doped CeO 2 (GDC) electrolyte, NiO-GDC anode and (La, Sr)(Co, Fe)O 3 (LSCF)-GDC cathode. In this study, a newly developed cube-type SOFC stack which consists of three SOFC bundles was designed and examined. The bundle consists of three 2 mm diameter tubular SOFCs and a rectangular shaped cathode support where these tubular cells are arranged in parallel. The performance of the stack whose volume is less than 1 cm 3 was shown to be 2.8 V OCV and over 1 W at 1.6 V under 500 °C. Cathode loss factor due to current collection from cathode matrix was also estimated using a proposed model.

[1]  M. Sano,et al.  Comparative Performance of Anode-Supported SOFCs Using a Thin Ce0.9Gd0.1O1.95 Electrolyte with an Incorporated BaCe0.8Y0.2O3 − α Layer in Hydrogen and Methane , 2006 .

[2]  H. Bohn,et al.  Electrical Conductivity of the High-Temperature Proton Conductor BaZr0.9Y0.1O2.95 , 2004 .

[3]  Eric D. Wachsman,et al.  Functionally gradient bilayer oxide membranes and electrolytes , 2002 .

[4]  Anil V. Virkar,et al.  The role of electrode microstructure on activation and concentration polarizations in solid oxide fuel cells , 2000 .

[5]  P. Sarkar,et al.  Anode‐Supported Tubular Micro‐Solid Oxide Fuel Cell , 2007 .

[6]  N. Sammes,et al.  Design and fabrication of a 100 W anode supported micro-tubular SOFC stack , 2005 .

[7]  B. Steele,et al.  Materials for fuel-cell technologies , 2001, Nature.

[8]  N. Minh.  Ceramic Fuel Cells , 1993 .

[9]  S. Singhal.  Solid oxide fuel cells for stationary, mobile, and military applications , 2002 .

[10]  N. Brandon,et al.  Modelling of cells, stacks and systems based around metal-supported planar IT-SOFC cells with CGO electrolytes operating at 500–600 °C , 2005 .

[11]  Tatsumi Ishihara,et al.  High-Power SOFC Using La0.9Sr0.1Ga0.8Mg0.2O3 − δ ∕ Ce0.8Sm0.2O2 − δ Composite Film , 2005 .

[12]  Jun Akikusa,et al.  Characterization of solid oxide fuel cell using doped lanthanum gallate , 2000 .

[13]  M. M. Nasrallah,et al.  Structure and electrical properties of La1 − xSrxCo1 − yFeyO3. Part 2. The system La1 − xSrxCo0.2Fe0.8O3 , 1995 .

[14]  Jonghee Han,et al.  Performance of anode-supported solid oxide fuel cell with La0.85Sr0.15MnO3 cathode modified by sol–gel coating technique , 2002 .

[15]  Takashi Hibino,et al.  An Intermediate-Temperature Solid Oxide Fuel Cell Providing Higher Performance with Hydrocarbons than with Hydrogen , 2002 .

[16]  Fritz B. Prinz,et al.  High-Performance Ultrathin Solid Oxide Fuel Cells for Low-Temperature Operation , 2007 .

[17]  Kevin Kendall,et al.  A small solid oxide fuel cell demonstrator for microelectronic applications , 1998 .

[18]  Yanhai Du,et al.  Fabrication and characterization of tubular solid oxide fuel cells , 2007 .

[19]  Takanori Inoue,et al.  Electrical properties of ceria-based oxides and their application to solid oxide fuel cells , 1992 .

[20]  Kerry D. Meinhardt,et al.  Optimized Lanthanum Ferrite-Based Cathodes for Anode-Supported SOFCs , 2002 .

[21]  B. Steele.  Oxygen ion conductors and their technological applications , 1992 .

[22]  Zongping Shao,et al.  A high-performance cathode for the next generation of solid-oxide fuel cells , 2004, Nature.

[23]  O. Yamamoto.  Solid oxide fuel cells: fundamental aspects and prospects , 2000 .

[24]  Toshiaki Yamaguchi,et al.  Design and Fabrication of Lightweight, Submillimeter Tubular Solid Oxide Fuel Cells , 2007 .

[25]  Keiji Yashiro,et al.  Demonstration and Stack Concept of Quick Startup/shutdown SOFC (qSOFC) , 2002 .

[26]  Tatsumi Ishihara,et al.  Effects of rare earth cations doped for La site on the oxide ionic conductivity of LaGaO3-based perovskite type oxide , 1995 .

[27]  Toshio Suzuki,et al.  Optimization of Configuration for Cube-Shaped SOFC Bundles , 2007 .

[28]  Toshiaki Yamaguchi,et al.  Current collecting efficiency of micro tubular SOFCs , 2007 .

[29]  Brian C. H. Steele,et al.  Appraisal of Ce1−yGdyO2−y/2 electrolytes for IT-SOFC operation at 500°C , 2000 .

[30]  L. D. Jonghe,et al.  Reduced-Temperature Solid Oxide Fuel Cell Based on YSZ Thin-Film Electrolyte , 1997 .