On-line parameter identification and control parameters optimization of robot joints with unknown load torque

An online identification method based on discrete model reference adaptive identification is presented in this paper. First, the algorithm obtains the difference equation of the reference mode, which includes both load inertia and damping coefficient, by dispersing the mechanical movement equation of motion of motor. Landau's discrete time-recursive parameter identification is used to reduce the adaptation mechanism. Then, the control parameters are optimized on-line on the base of the estimation result and the error threshold. This method can estimate the load inertia and damping coefficient at the same time which are used to optimize the speed PI regulator parameters and improve the performance for speed control. The simulation and experiment results prove the effectiveness of the proposed method.

[1]  Qitao Huang,et al.  An inertial parameter identification method of eliminating system damping effect for a six-degree-of-freedom parallel manipulator , 2015 .

[2]  M.P.R.V. Rao.  Non-quadratic Lyapunov function and adaptive laws for model reference adaptive control , 1998 .

[3]  Masayoshi Tomizuka,et al.  Dual-Stage Adaptive Friction Compensation for Precise Load Side Position Tracking of Indirect Drive Mechanisms , 2015, IEEE Transactions on Control Systems Technology.

[4]  Zhao Ximei,et al.  Neural-network-based self-tuning PI controller for Permanent Magnet Synchronous Motor , 2011, 2011 International Conference on Electrical Machines and Systems.

[5]  G.L. Blankenship,et al.  Nonlinear Adaptive Control of Active Vehicle Suspensions , 1993, 1993 American Control Conference.

[6]  Zheng Wang,et al.  Speed Measurement Error Suppression for PMSM Control System Using Self-Adaption Kalman Observer , 2015, IEEE Transactions on Industrial Electronics.

[7]  Kiyong Kim,et al.  Self-Tuning of the PID Controller for a Digital Excitation Control System , 2010 .

[8]  Dianguo Xu,et al.  On-line Inertia Identification Algorithm for PI Parameters Optimization in Speed Loop , 2015, IEEE transactions on power electronics.

[9]  F. Andoh,et al.  Moment of Inertia Identification Using the Time Average of the Product of Torque Reference Input and Motor Position , 2007, IEEE Transactions on Power Electronics.

[10]  Rong-Ching Wu,et al.  Parameter estimation of induction machines under no-load test , 2010, 2010 5th IEEE Conference on Industrial Electronics and Applications.