Bifurcation behavior and efficient pure hydrogen production for fuel cells using a novel autothermic membrane Circulating fluidized-bed (CFB) reformer: Sequential debottlenecking and the contribution of John Grace
暂无分享,去创建一个
[1] Jamal Chaouki,et al. Scaling considerations for circulating fluidized bed risers , 1992 .
[2] Dan Luss,et al. Ceramic membrane reactor for synthesis gas production , 2001 .
[3] Said S.E.H. Elnashaie,et al. Modeling and optimization of a novel membrane reformer for higher hydrocarbons , 2003 .
[4] U. Balachandran,et al. INTEGRATED CERAMIC MEMBRANE SYSTEM FOR HYDROGEN PRODUCTION , 2000 .
[5] P. B. Tottrup,et al. Kinetics of decomposition of carbon monoxide on a supported nickel catalyst. [Effects of temperature, water, and hydrogen; competition for methanation] , 1976 .
[6] Said S.E.H. Elnashaie,et al. Novel circulating fast fluidized-bed membrane reformer for efficient production of hydrogen from steam reforming of methane , 2003 .
[7] G. Froment,et al. Methane steam reforming, methanation and water‐gas shift: I. Intrinsic kinetics , 1989 .
[8] A. M. Adris,et al. Fluidized-bed steam methane reforming with oxygen input , 1999 .
[9] John R. Grace,et al. The fluidized-bed membrane reactor for steam methane reforming: model verification and parametric study , 1997 .
[10] Said S.E.H. Elnashaie,et al. A fluidized bed membrane reactor for the steam reforming of methane , 1991 .
[11] M. Dry,et al. Internal and external transport effects during the oxidative reforming of methane on a commercial steam reforming catalyst , 1997 .
[12] Gilbert F. Froment,et al. Kinetic Study of the Carbon Filament Formation by Methane Cracking on a Nickel Catalyst , 1997 .
[13] Octave Levenspiel,et al. Circulating fluidized-bed reactors , 1997 .
[14] Said S.E.H. Elnashaie,et al. Novel Circulating Fluidized-Bed Membrane Reformer for the Efficient Production of Ultraclean Fuels from Hydrocarbons , 2002 .
[15] Caixia Chen,et al. Numerical simulation of entrained flow coal gasifiers. Part I: modeling of coal gasification in an entrained flow gasifier , 2000 .
[16] Wanqin Jin,et al. Experimental and simulation study on a catalyst packed tubular dense membrane reactor for partial oxidation of methane to syngas , 2000 .
[17] Thomas Sandahl Christensen,et al. Adiabatic prereforming of hydrocarbons — an important step in syngas production , 1996 .
[18] John R. Grace,et al. The fluidized bed membrane reactor system: a pilot scale experimental study , 1994 .
[19] Bernard P. A. Grandjean,et al. Methane steam reforming in asymmetric Pd- and Pd-Ag/porous SS membrane reactors , 1994 .
[20] J. Rostrup-Nielsen. Coking on nickel catalysts for steam reforming of hydrocarbons , 1974 .
[21] C. Tsai. Dense perovskite membrane reactors for partial oxidation of methane to syngas , 1997 .
[22] Octave Levenspiel,et al. Entrainment of solids from fluidized beds I. Hold-up of solids in the freeboard II. Operation of fast fluidized beds , 1990 .
[23] Said S.E.H. Elnashaie,et al. Simulation and optimization of an industrial ammonia reactor , 1988 .
[24] Peter B. Tøttrup,et al. Evaluation of intrinsic steam reforming kinetic parameters from rate measurements on full particle size , 1982 .
[25] Michael Schwartz,et al. Catalytic membrane reactors for spontaneous synthesis gas production , 2000 .
[26] Kunio Suzuki,et al. Partial oxidation of methane to synthesis gas over some titanates based perovskite oxides , 1993 .