Multielement Synergetic Effect of Boron Nitride and Multi-walled Carbon Nanotubes for Fabrication of Novel Shape-Stabilized Phase-Change Composites with Enhanced Thermal Conductivity.

Shape-stabilized phase-change composites (SSPCCs) have been widely applied for thermal energy storage and thermal management due to their excellent properties. To further improve their thermal conductivity and thermal cycling stability, we successfully designed and synthesized a series of SSPCCs with three-dimensional (3D) thermally conductive networks by exploiting the synergistic effect between one-dimensional (1D) carbon nanotubes (CNTs) and two-dimensional (2D) hexagonal boron nitride (h-BN). The interconnected thermally conductive network composed of h-BN and multi-walled carbon nanotubes (MWCNTs) enhanced the SSPCCs performance. The micro-morphologies of the prepared SSPCCs revealed that well-dispersed MWCNTs, hydroxylated h-BN, and polyethylene glycol (PEG) molecular chains were effectively bonded into a 3D crosslinking structure for the SSPCCs. Moreover, the chemical and crystalline structural, thermal properties, and thermal cycling stability of the novel SSPCCs were systematically investigated by various characterization techniques. The presence of the 3D thermally conductive network in the as-synthesized SSPCCs evidently improved the shape stability, phase-change behavior, and thermal stability. Benefiting from the 3D nano-structural uniqueness of SSPCCs, the thermal conductivity of the SSPCC-2 was up to 1.15 W m-1 K-1, which represented a significant enhancement of 239.7% compared with that of pure PEG. Meanwhile, the efficient synergistic effect of h-BN and MWCNTs remarkably enhanced the heat transfer rate of the SSPCCs. These results demonstrate that the prepared SSPCCs have potential for applications in thermal energy storage and thermal management systems. The study opens a new avenue toward the development of SSPCCs with good comprehensive properties.

[1]  Y. Ko,et al.  Highly Durable and Thermally Conductive Shell-Coated Phase-Change Capsule as a Thermal Energy Battery. , 2020, ACS applied materials & interfaces.

[2]  Zong-liang Du,et al.  Alkylated nanofibrillated cellulose/carbon nanotubes aerogels supported form-stable phase change composites with improved n-alkanes loading capacity and thermal conductivity. , 2020, ACS applied materials & interfaces.

[3]  A. Fleischer,et al.  Thermal enhancement and shape stabilization of a phase-change energy-storage material via copper nanowire aerogel , 2019, Chemical Engineering Journal.

[4]  Xiaodong Wang,et al.  A molecularly imprinted phase-change microcapsule system for bifunctional applications in waste heat recovery and targeted pollutant removal. , 2019, ACS applied materials & interfaces.

[5]  Q. Wei,et al.  Ultralight and Flexible Carbon Foam-Based Phase Change Composites with High Latent-Heat Capacity and Photo-Thermal Conversion Capability. , 2019, ACS applied materials & interfaces.

[6]  Fei Xue,et al.  Melamine foam-templated graphene nanoplatelet framework toward phase change materials with multiple energy conversion abilities , 2019, Chemical Engineering Journal.

[7]  Lixian Sun,et al.  Graphene-oxide-induced lamellar structures used to fabricate novel composite solid-solid phase change materials for thermal energy storage , 2019, Chemical Engineering Journal.

[8]  M. Huang,et al.  Remarkably anisotropic conductive MWCNTs/polypropylene nanocomposites with alternating microlayers , 2019, Chemical Engineering Journal.

[9]  Tingting Qian,et al.  Comparative Study of Single-Walled Carbon Nanotubes and Graphene Nanoplatelets for Improving the Thermal Conductivity and Solar-to-Light Conversion of PEG-Infiltrated Phase-Change Material Composites , 2019, ACS Sustainable Chemistry & Engineering.

[10]  Hang Yu,et al.  Preparation and characterization of PMMA/TiO2 hybrid shell microencapsulated PCMs for thermal energy storage , 2019, Energy.

[11]  Hongyi Gao,et al.  Shape-stabilized phase change materials based on porous supports for thermal energy storage applications , 2019, Chemical Engineering Journal.

[12]  Ang Li,et al.  Nanoconfinement effects on thermal properties of nanoporous shape-stabilized composite PCMs: A review , 2018, Nano Energy.

[13]  Ayesha Kausar,et al.  Fabrication of epoxy functionalized MWCNTs reinforced PVDF nanocomposites with high dielectric permittivity, low dielectric loss and high electrical conductivity , 2018, Composites Science and Technology.

[14]  G. Fang,et al.  Palmitic acid/polyvinyl butyral/expanded graphite composites as form-stable phase change materials for solar thermal energy storage , 2018, Applied Energy.

[15]  G. Song,et al.  A facile approach to synthesize microencapsulated phase change materials embedded with silver nanoparicle for both thermal energy storage and antimicrobial purpose , 2018, Energy.

[16]  Ang Li,et al.  Hierarchical 3D Reduced Graphene Porous-Carbon-Based PCMs for Superior Thermal Energy Storage Performance. , 2018, ACS applied materials & interfaces.

[17]  W. Dong,et al.  Alkylated Meso-Macroporous Metal-Organic Framework Hollow Tubes as Nanocontainers of Octadecane for Energy Storage and Thermal Regulation. , 2018, Small.

[18]  Wei Yang,et al.  Hybridizing graphene aerogel into three-dimensional graphene foam for high-performance composite phase change materials , 2018, Energy Storage Materials.

[19]  Ang Li,et al.  Highly graphitized 3D network carbon for shape-stabilized composite PCMs with superior thermal energy harvesting , 2018, Nano Energy.

[20]  A. Mahmood,et al.  Nanoconfined phase change materials for thermal energy applications , 2018 .

[21]  L. Fu,et al.  Enhanced thermal conductivity of poly(vinylidene fluoride)/boron nitride nanosheet composites at low filler content , 2018, Composites Part A: Applied Science and Manufacturing.

[22]  Lixian Sun,et al.  Preparation and thermal properties of exfoliated graphite/erythritol/mannitol eutectic composite as form-stable phase change material for thermal energy storage , 2018 .

[23]  E. Shchukina,et al.  Nanoencapsulation of phase change materials for advanced thermal energy storage systems , 2018, Chemical Society reviews.

[24]  Zhongzhen Yu,et al.  High-quality graphene aerogels for thermally conductive phase change composites with excellent shape stability , 2018 .

[25]  Hongyi Gao,et al.  A one-step in-situ assembly strategy to construct PEG@MOG-100-Fe shape-stabilized composite phase change material with enhanced storage capacity for thermal energy storage , 2017 .

[26]  Wei Yang,et al.  Hierarchically interconnected porous scaffolds for phase change materials with improved thermal conductivity and efficient solar-to-electric energy conversion. , 2017, Nanoscale.

[27]  Lixian Sun,et al.  Synthesis of three-dimensional graphene aerogel encapsulated n-octadecane for enhancing phase-change behavior and thermal conductivity , 2017 .

[28]  Xuan He,et al.  Synthesis of boron nitride nanotubes by catalytic pyrolysis of organic-inorganic hybrid precursor , 2017 .

[29]  Qilin Guo,et al.  Preparation and thermal properties of short carbon fibers/erythritol phase change materials , 2017 .

[30]  Xingyi Huang,et al.  Cellulose Nanofiber Supported 3D Interconnected BN Nanosheets for Epoxy Nanocomposites with Ultrahigh Thermal Management Capability , 2017 .

[31]  Wei Yang,et al.  An ice-templated assembly strategy to construct graphene oxide/boron nitride hybrid porous scaffolds in phase change materials with enhanced thermal conductivity and shape stability for light–thermal–electric energy conversion , 2016 .

[32]  Dmitri Golberg,et al.  Functionalized hexagonal boron nitride nanomaterials: emerging properties and applications. , 2016, Chemical Society reviews.

[33]  Jooheon Kim,et al.  Filler orientation of boron nitride composite via external electric field for thermal conductivity enhancement , 2016 .

[34]  Wei Yang,et al.  Hybrid graphene aerogels/phase change material composites: Thermal conductivity, shape-stabilization and light-to-thermal energy storage , 2016 .

[35]  Zuowan Zhou,et al.  Largely Enhanced Thermal Conductivity and High Dielectric Constant of Poly(vinylidene fluoride)/Boron Nitride Composites Achieved by Adding a Few Carbon Nanotubes , 2016 .

[36]  Zhengguo Zhang,et al.  Preparation and properties of graphene oxide-modified poly(melamine-formaldehyde) microcapsules containing phase change material n-dodecanol for thermal energy storage , 2015 .

[37]  Jun Hou,et al.  Preparation and characterization of surface modified boron nitride epoxy composites with enhanced thermal conductivity , 2014 .

[38]  K. Pielichowski,et al.  Phase change materials for thermal energy storage , 2014 .

[39]  Haiyan Wu,et al.  Melamine foam/reduced graphene oxide supported form-stable phase change materials with simultaneous shape memory property and light-to-thermal energy storage capability , 2020, Chemical Engineering Journal.

[40]  Wei Yang,et al.  Hybrid network structure of boron nitride and graphene oxide in shape-stabilized composite phase change materials with enhanced thermal conductivity and light-to-electric energy conversion capability , 2018 .

[41]  Yuming Yang,et al.  Synthesis and properties of crosslinking halloysite nanotubes/polyurethane-based solid-solid phase change materials , 2018 .

[42]  Zhongzhen Yu,et al.  Highly anisotropic graphene/boron nitride hybrid aerogels with long-range ordered architecture and moderate density for highly thermally conductive composites , 2018 .