Robust Optimization for Precision Product using Taguchi-RSM and Desirability Function

[1]  H. Ali,et al.  IJFP-2018-0015 - Robust Control Design for an Inlet Metering Velocity Control System of a Linear Hydraulic Actuator , 2020 .

[2]  Thanh-Phong Dao,et al.  Design variables optimization effects on acceleration and contact force of the double sliders-crank mechanism having multiple revolute clearance joints by use of the Taguchi method based on a grey relational analysis , 2020 .

[3]  Rakesh Mishra,et al.  Experimental Investigation of the Effect of Air Injection on Performance and Detection of Cavitation in the Centrifugal Pump Based on Vibration Technique , 2020, Arabian Journal for Science and Engineering.

[4]  Ming-Chyuan Lin,et al.  Using Taguchi and neural network approaches in the optimum design of product development process , 2020, Int. J. Comput. Integr. Manuf..

[5]  R. Patrikar,et al.  Design and fabrication of PDMS‐based electrostatically actuated MEMS cantilever beam , 2020, Micro & Nano Letters.

[6]  Yi Min Xie,et al.  The robust fail-safe topological designs based on the von Mises stress , 2020 .

[7]  Jionghua Jin,et al.  Bayesian closed-loop robust process design considering model uncertainty and data quality , 2020, IISE Trans..

[8]  Thanh-Phong Dao,et al.  An effective hybrid approach of desirability, fuzzy logic, ANFIS and LAPO algorithm for optimizing compliant mechanism , 2020, Engineering with Computers.

[9]  N. Alsaadi,et al.  Design and optimization of bimorph energy harvester based on Taguchi and ANOVA approaches , 2020 .

[10]  Linhan Ouyang,et al.  A new ensemble modeling approach for reliability-based design optimization of flexure-based bridge-type amplification mechanisms , 2020, The International Journal of Advanced Manufacturing Technology.

[11]  Mohammad A. Gharaibeh,et al.  Random vibration fatigue life analysis of electronic packages by analytical solutions and Taguchi method , 2019, Microelectronics Reliability.

[12]  Linhan Ouyang,et al.  An interval probability‐based FMEA model for risk assessment: A real‐world case , 2019, Qual. Reliab. Eng. Int..

[13]  Zheng Lv,et al.  A novel iterative algorithm for natural frequency analysis of FG thin plates under interval uncertainty , 2019, Structural and Multidisciplinary Optimization.

[14]  Wan Liangqi,et al.  Response surface methodology-based hybrid robust design optimization for complex product under mixed uncertainties , 2019, Journal of Systems Engineering and Electronics.

[15]  Srinivas Sriramula,et al.  Kriging models for aero-elastic simulations and reliability analysis of offshore wind turbine support structures , 2018, Ships and Offshore Structures.

[16]  Lei Wang,et al.  Motion error based robust topology optimization for compliant mechanisms under material dispersion and uncertain forces , 2018 .

[17]  Jianjun Wang,et al.  An interval programming model for continuous improvement in micro-manufacturing , 2018 .

[18]  Jae Jong Lee,et al.  Amplification ratio analysis of a bridge-type mechanical amplification mechanism based on a fully compliant model , 2018 .

[19]  F. Ibrahim,et al.  Design optimisation of high sensitivity MEMS piezoresistive intracranial pressure sensor using Taguchi approach , 2018 .

[20]  Thanh-Phong Dao,et al.  Robust Parameter Design and Analysis of a Leaf Compliant Joint for Micropositioning Systems , 2017 .

[21]  Qingsong Xu,et al.  Design and control of a novel piezo-driven XY parallel nanopositioning stage , 2017 .

[22]  Songtao Wang,et al.  Natural frequency analysis and experiment for 3SPS+1PS parallel hip joint manipulator based on rigid-flexible coupling theory , 2017 .

[23]  Atul Kumar Sahu,et al.  Optimization of weld bead geometry of MS plate (Grade: IS 2062) in the context of welding: a comparative analysis of GRA and PCA–Taguchi approaches , 2017 .

[24]  Thanh-Phong Dao,et al.  Design and computational optimization of a flexure-based XY positioning platform using FEA-based response surface methodology , 2016, International Journal of Precision Engineering and Manufacturing.

[25]  Ke-qi Qi,et al.  Analysis of the displacement amplification ratio of bridge-type mechanism , 2015 .

[26]  Xianmin Zhang,et al.  A multi-objective method of hinge-free compliant mechanism optimization , 2014 .

[27]  Jaehwa Jeong,et al.  Robust Design and Performance Verification of an In-Plane XYθ Micropositioning Stage , 2011, IEEE Transactions on Nanotechnology.

[28]  Seog-Young Han,et al.  Robust design of an active micro-mixer based on the Taguchi method , 2008 .

[29]  Y. Lai,et al.  Investigation of Structures of Microwave Microelectromechanical-System Switches by Taguchi Method , 2007 .

[30]  Hashem Omrani,et al.  An integrated multi response Taguchi- neural network- robust data envelopment analysis model for CO2 laser cutting , 2019, Measurement.

[31]  Muhammad Zubair,et al.  Multiphysics design optimization of RF-MEMS switch using response surface methodology , 2018, Microelectron. J..