Investigation on the shear performance of circumferential joints of segments in super‐large cross‐section shield tunnels

[1]  A. Chourasia,et al.  Reinforced concrete beam‐columns anchored with headed bars subjected to reversed cyclic loading: Experimental and numerical investigation , 2023, Structural Concrete.

[2]  Jing-Xuan Zhang,et al.  Experimental study on Inter-ring joint shearing characteristics of gas transmission shield tunnel with bent bolt and tenon , 2022, Tunnelling and Underground Space Technology.

[3]  Chi Zhang,et al.  Full-scale experimental study on failure characteristics of the key segment in shield tunnel with super-large cross-section , 2022, Tunnelling and Underground Space Technology.

[4]  Linzhu Sun,et al.  Experimental study on seismic behavior of T‐shaped steel fiber reinforced concrete columns , 2022, Structural Concrete.

[5]  Q. Yan,et al.  Failure analysis of a new-type shield tunnel based on distributed optical fiber sensing technology , 2022, Engineering Failure Analysis.

[6]  Kun Feng,et al.  Prototype test of the mechanical behavior and failure mechanism of segment structure with distributed mortises and tenons , 2021, Structural Concrete.

[7]  Shaokun Ma,et al.  Study of the mechanical behaviour and damage characteristics of three new types of joints for fabricated rectangular tunnels using a numerical approach , 2021, Tunnelling and Underground Space Technology.

[8]  Di Wang,et al.  3D nonlinear finite element modelling of mechanical behavior of a new wall-beam-strut joint for prefabricated underground construction and validation again experimental testing , 2021 .

[9]  F. Liang,et al.  Numerical simulation and simplified analytical model for the longitudinal joint bending stiffness of a tunnel considering axial force , 2021, Structural Concrete.

[10]  Li-li Xue,et al.  Deformation Behavior of Shield Segment Joint Controlled by Bolt and Positioning Tenon , 2021, Arabian Journal for Science and Engineering.

[11]  Zhang Dong-mei,et al.  Shearing Behavior of Circumferential Joints with Oblique Bolts in Large Diameter Shield Tunnel , 2020 .

[12]  Chuan He,et al.  Refined three‐dimensional numerical model for segmental joint and its application , 2020, Structural Concrete.

[13]  Hehua Zhu,et al.  Experimental and analytical study on longitudinal bending behavior of shield tunnel subjected to longitudinal axial forces , 2019, Tunnelling and Underground Space Technology.

[14]  Weiqi Wang,et al.  Full-scale tests on bending behavior of segmental joints for large underwater shield tunnels , 2018 .

[15]  Kenichi Soga,et al.  Comparison of the structural behavior of reinforced concrete and steel fiber reinforced concrete tunnel segmental joints , 2017 .

[16]  Xian Liu,et al.  Ultimate load‐carrying capacity of the longitudinal joints in segmental tunnel linings , 2017 .

[17]  Huai-Na Wu,et al.  Longitudinal structural modelling of shield tunnels considering shearing dislocation between segmental rings , 2015 .

[18]  Hehua Zhu,et al.  A progressive model to simulate the full mechanical behavior of concrete segmental lining longitudinal joints , 2015 .

[19]  Huai-na Wu,et al.  Deformation behaviors and failure mechanism of segmental RC lining under unloading condition , 2022, Tunnelling and Underground Space Technology.

[20]  Xian Liu,et al.  Investigation of the structural effect induced by stagger joints in segmental tunnel linings: Direct insight from mechanical behaviors of longitudinal and circumferential joints , 2018 .