Micro-macro bilateral control with compensation of gravity and friction

In the macro-micro bilateral control, external force added to the slave motor is scaled. In the control, gravity and friction of the slave motor is scaled. Therefore, when the scaling rate is large, adverse effects of the gravity and friction become large. For accurate control, these factors must be compensated. Environment quarrier is proposed as the real time identification and compensation of the gravity and friction. It uses dummy motor and operate motor. These motors have same structure and same position. By assuming that the gravity and friction of the motors are same, the system achieves real time identification and compensation of the gravity and friction. This paper proposes micro macro bilateral control with compensation of the gravity and friction. The system consists of master motor, slave motor and dummy motor. The master and slave motors are controlled by macro-micro bilateral control. The dummy motor compensates gravity and friction of the slave motor. The proposed system decreases the negative effect of the gravity and friction when the scaling rate is large.

[1]  K. Ohnishi,et al.  Reproducibility and operationality in bilateral teleoperation , 2004, The 8th IEEE International Workshop on Advanced Motion Control, 2004. AMC '04..

[2]  Toshiyuki Murakami,et al.  Torque sensorless control in multidegree-of-freedom manipulator , 1993, IEEE Trans. Ind. Electron..

[3]  Tsuneo Yoshikawa,et al.  Bilateral control of master-slave manipulators for ideal kinesthetic coupling-formulation and experiment , 1994, IEEE Trans. Robotics Autom..

[4]  Septimiu E. Salcudean,et al.  On the use of local force feedback for transparent teleoperation , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[5]  Kouhei Ohnishi,et al.  Motion control for advanced mechatronics , 1996 .

[6]  Tomoyuki Shimono,et al.  Gravity compensation for improvement of operationarity in bilateral teleoperation , 2008 .

[7]  Kouhei Ohnishi,et al.  Transmission of real world force sensation by micro/macro bilateral control based on acceleration control with standardization matrix , 2008 .

[8]  Syh-Shiuh Yeh,et al.  Precision Control and Compensation of Servomotors and Machine Tools via the Disturbance Observer , 2010, IEEE Transactions on Industrial Electronics.

[9]  Septimiu E. Salcudean,et al.  Bilateral parallel force/position teleoperation control , 2002, J. Field Robotics.

[10]  K. Kosuge,et al.  Implementation of the micro-macro teleoperation system without using slave-side force sensors , 1997, Proceedings of International Conference on Robotics and Automation.

[11]  Kouhei Ohnishi,et al.  Transmission of force sensation by environment quarrier based on multilateral control , 2007, 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005..

[12]  Kouhei Ohnishi,et al.  Micro-macro bilateral control taking into account scaling of control gains , 2009 .

[13]  Akihito Sano,et al.  Personal scaling on micro-teleoperation , 2000, 2000 26th Annual Conference of the IEEE Industrial Electronics Society. IECON 2000. 2000 IEEE International Conference on Industrial Electronics, Control and Instrumentation. 21st Century Technologies.

[14]  Kouhei Ohnishi,et al.  Quarry of Modal Information from Environment for Advanced Motion Control , 2006 .

[15]  Michael Goldfarb,et al.  An implementation of loop-shaping compensation for multidegree-of-freedom macro-microscaled telemanipulation , 2005, IEEE Transactions on Control Systems Technology.