Fabrication and characterization of poly(methylmethacrylate) microfluidic devices bonded using surface modifications and solvents.

The fabrication of polymer microchips allows inexpensive, durable, high-throughput and disposable devices to be made. Poly(methylmethacrylate) (PMMA) microchips have been fabricated by hot embossing microstructures into the substrate followed by bonding a cover plate. Different surface modifications have been examined to enhance substrate and cover plate adhesion, including: air plasma treatment, and both acid catalyzed hydrolysis and aminolysis of the acrylate to yield carboxyl and amine-terminated PMMA surfaces. Unmodified PMMA surfaces were also studied. The substrate and cover plate adhesion strengths were found to increase with the hydrophilicity of the PMMA surface and reached a peak at 600 kN m(-2) for plasma treated PMMA. A solvent assisted system has also been designed to soften less than 50 nm of the surface of PMMA during bonding, while still maintaining microchannel integrity. The extent to which both surface modifications and solvent treatment affected the adhesion of the substrate to the cover plate was examined using nanoindentation methods. The solvent bonding system greatly increased the adhesion strengths for both unmodified and modified PMMA, with a maximum adhesion force of 5500 kN m(-2) achieved for unmodified PMMA substrates. The bond strength decreased with increasing surface hydrophilicity after solvent bonding, a trend that was opposite to what was observed for non-solvent thermal bonding.

[1]  P. Renaud,et al.  Polyimide-based microfluidic devices. , 2001, Lab on a Chip.

[2]  O. Tabata,et al.  Replica multichannel polymer chips with a network of sacrificial channels sealed by adhesive printing method. , 2005, Lab on a chip.

[3]  D. J. Harrison,et al.  Micromachining a Miniaturized Capillary Electrophoresis-Based Chemical Analysis System on a Chip , 1993, Science.

[4]  D. J. Harrison,et al.  Capillary electrophoresis and sample injection systems integrated on a planar glass chip , 1992 .

[5]  A. Manz,et al.  Micro total analysis systems. Recent developments. , 2004, Analytical chemistry.

[6]  A. Plant,et al.  Radiometric and fluorimetric determination of aminosilanes and protein covalently bound to thermally pretreated glass substrates , 1990 .

[7]  George M. Whitesides,et al.  Rapid prototyping of complex structures with feature sizes larger than 20 μm , 1996 .

[8]  Andreas Manz,et al.  Planar glass chips for capillary electrophoresis: repetitive sample injection, quantitation, and separation efficiency , 1993 .

[9]  P. Grodzinski,et al.  Microfabricated polycarbonate CE devices for DNA analysis. , 2001, Analytical chemistry.

[10]  Investigation of the stiffness change in, the indentation force and the hydrophobic recovery of plasma-oxidized polydimethylsiloxane surfaces by tapping mode atomic force microscopy , 2001 .

[11]  D. Raghavan,et al.  Characterization of Heterogeneous Regions in Polymer Systems Using Tapping Mode and Force Mode Atomic Force Microscopy , 2000 .

[12]  George M. Whitesides,et al.  Formation of monolayers by the coadsorption of thiols on gold: variation in the head group, tail group, and solvent , 1989 .

[13]  R. McCormick,et al.  Microchannel electrophoretic separations of DNA in injection-molded plastic substrates. , 1997, Analytical chemistry.

[14]  Steven A. Soper,et al.  Surface modification of polymer-based microfluidic devices , 2002 .

[15]  M. Tanaka,et al.  Labeling of free carboxyl groups. , 1994, Journal of chromatography. B, Biomedical applications.

[16]  A. Ricco,et al.  Peer Reviewed: Plastic Advances Microfluidic Devices , 2002 .

[17]  A. Manz,et al.  Glass chips for high-speed capillary electrophoresis separations with submicrometer plate heights , 1993 .

[18]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[19]  Hitoshi Muguruma,et al.  Organic plasma process for simple and substrate-independent surface modification of polymeric BioMEMS devices. , 2004, Biosensors & bioelectronics.

[20]  Steven A Soper,et al.  Electrokinetically synchronized polymerase chain reaction microchip fabricated in polycarbonate. , 2005, Analytical chemistry.

[21]  C Gärtner,et al.  Polymer microfabrication methods for microfluidic analytical applications , 2000, Electrophoresis.

[22]  Laurie Brown,et al.  Epoxy resins as stamps for hot embossing of microstructures and microfluidic channels , 2005 .

[23]  K. Komvopoulos,et al.  Nanomechanical Properties of Polymers Determined From Nanoindentation Experiments , 2001 .

[24]  Yu-jiang Xie,et al.  Vacuum-assisted thermal bonding of plastic capillary electrophoresis microchip imprinted with stainless steel template. , 2004, Journal of chromatography. A.

[25]  Jinan Chai,et al.  Wettability interpretation of oxygen plasma modified poly(methyl methacrylate). , 2004, Langmuir : the ACS journal of surfaces and colloids.

[26]  Yolanda Y. Davidson,et al.  Surface modification of poly(methyl methacrylate) used in the fabrication of microanalytical devices. , 2000, Analytical chemistry.

[27]  H. Becker,et al.  Polymer microfluidic devices. , 2002, Talanta.

[28]  Adam T Woolley,et al.  Phase-changing sacrificial materials for solvent bonding of high-performance polymeric capillary electrophoresis microchips. , 2005, Analytical chemistry.

[29]  Holger Becker,et al.  Fabrication of plastic microchips by hot embossing. , 2002, Lab on a chip.

[30]  Osamu Tabata,et al.  High-performance genetic analysis on microfabricated capillary array electrophoresis plastic chips fabricated by injection molding. , 2005, Analytical chemistry.

[31]  Oliver Geschke,et al.  CO(2)-laser micromachining and back-end processing for rapid production of PMMA-based microfluidic systems. , 2002, Lab on a chip.

[32]  A. Svatoš,et al.  Atmospheric molded poly(methylmethacrylate) microchip emitters for sheathless electrospray. , 2004, Rapid communications in mass spectrometry : RCM.

[33]  L. Locascio,et al.  Integrated microfluidic system enabling protein digestion, peptide separation, and protein identification. , 2001, Analytical chemistry.

[34]  S A Soper,et al.  Interfacing a polymer-based micromachined device to a nanoelectrospray ionization Fourier transform ion cyclotron resonance mass spectrometer. , 2001, Analytical chemistry.