MON4A-5 A 2.5V CMOS Swit ched-Capacit or C hannel-Select Filter with Image Rejection and Automatic Gain Control

This paper presents a channel-select filter for 2.4GHz low-IF Bluetooth transceiver ap- plication. Besides of channel selection, image sig- nal rejection, automatic gain control (AGC) and signal strength indication functions are all inte- grated. High frequency accuracy and large signal dynamic range is given as the switched-capacitor (SC) structure. Circuit techniques like multiple clock rate, filter capacitance scaling, and simpli- fied op-amp structure are employed for power min- imization. Measurement results indicate that the image rejection and the adjacent channel selectivity are better than 40dB and 60dB respectively. With a 0.25pm 1P5M CMOS technology the proposed filter dissipates 11.8mA from a single 2.5V supply voltage.

[1]  Behzad Razavi,et al.  Principles of Data Conversion System Design , 1994 .

[2]  A. Rofougaran,et al.  A CMOS channel-select filter for a direct-conversion wireless receiver , 1996, 1996 Symposium on VLSI Circuits. Digest of Technical Papers.

[3]  B.J. Minnis,et al.  A low-IF polyphase receiver for GSM using log-domain signal processing , 2000, 2000 IEEE Radio Frequency Integrated Circuits (RFIC) Symposium Digest of Papers (Cat. No.00CH37096).

[4]  G. Temes,et al.  Analog MOS Integrated Circuits for Signal Processing , 1986 .

[5]  Asad A. Abidi,et al.  A wideband tunable CMOS channel-select filter for a low-IF wireless receiver , 1999, Proceedings of the IEEE 1999 Custom Integrated Circuits Conference (Cat. No.99CH36327).

[6]  Jacques C. Rudell,et al.  A 1.9-GHz wide-band IF double conversion CMOS receiver for cordless telephone applications , 1997, IEEE J. Solid State Circuits.