CO2 reforming of CH4 over Ni/Mg–Al oxide catalysts prepared by solid phase crystallization method from Mg–Al hydrotalcite-like precursors

Ni supported catalysts were prepared by the solid phase crystallization (spc) method starting from hydrotalcite (HT) anionic clay based on [Mg6Al2(OH)16CO32−]⋅H2O as the precursor. The precursors were prepared by the co-precipitation method from nitrates of the metal components, and then thermally decomposed, in situ reduced to form Ni supported catalysts (spc-Ni/Mg–Al) and used for the CO2 reforming of CH4 to synthesis gas. Ni2+ can well replace the Mg2+ site in the hydrotalcite, resulting in the formation of highly dispersed Ni metal particles on spc-Ni/Mg–Al. The spc-catalyst thus prepared showed higher activity than those prepared by the conventional impregnation (imp) method such as Ni/α-Al2O3 and Ni/MgO. When Ni was supported by impregnation of Mg–Al mixed oxide prepared from Mg–Al HT, the activity of imp-Ni/Mg–Al thus prepared was not so low as those of Ni/α-Al2O3 and Ni/MgO but close to that of spc-Ni/Mg–Al. The relatively high activity of imp-Ni/Mg–Al may be due to the regeneration of the Mg–Al HT phase from the mixed oxide during the preparation, resulting in an occurring of the incorporation of Ni2+ in the Mg2+ site in the HT as seen in the spc-method. Such an effect may give rise to the formation of highly dispersed Ni metal species and afford high activity on the imp-Ni/Mg–Al.

[1]  R. D. Shannon Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides , 1976 .

[2]  C. H. Bartholomew Carbon Deposition in Steam Reforming and Methanation , 1982 .

[3]  N. Parkyns,et al.  The Effect Of Preparation Method Upon The Structures, Stability And Metal/Support Interactions In Nickel/Alumina Catalysts , 1983 .

[4]  F. Frusteri,et al.  Temperature-programmed reduction study of NiO–MgO interactions in magnesia-supported Ni catalysts and NiO–MgO physical mixture , 1990 .

[5]  Malcolm L. H. Green,et al.  Partial oxidation of methane to synthesis gas using carbon dioxide , 1991, Nature.

[6]  F. Arena,et al.  Magnesia-supported nickel catalysts I. Factors affecting the structure and morphological properties , 1991 .

[7]  F. Solymosi,et al.  Catalytic reaction of CH4 with CO2 over alumina-supported Pt metals , 1991 .

[8]  Fabrizio Cavani,et al.  Hydrotalcite-type anionic clays: Preparation, properties and applications. , 1991 .

[9]  Jens R. Rostrup-Nielsen,et al.  CO2-Reforming of Methane over Transition Metals , 1993 .

[10]  F. Frusteri,et al.  Magnesia-Supported Nickel Catalysts: II. Surface Properties and Reactivity in Methane Steam Reforming , 1993 .

[11]  Ivar M. Dahl,et al.  Carbon dioxide reforming of methane over lanthanum-modified catalysts in a fluidized-bed reactor , 1994 .

[12]  M. Gazzano,et al.  Structure and reactivity of high-surface-area Ni/Mg/Al mixed oxides , 1995 .

[13]  C. Mirodatos,et al.  Methane reforming reaction with carbon dioxide over Ni/SiO2 Catalyst. I. Deactivation studies , 1996 .

[14]  Kaoru Fujimoto,et al.  Development of highly stable nickel catalyst for methane-steam reaction under low steam to carbon ratio , 1996 .

[15]  H. Fjellvåg,et al.  In situ XRD characterization of LaNiAlO model catalysts for CO2 reforming of methane , 1996 .

[16]  F. Frusteri,et al.  Effect of calcination on the structure of Ni/MgO catalyst: an X-ray diffraction study , 1996 .

[17]  X. Verykios,et al.  Comparative Study of Carbon Dioxide Reforming of Methane to Synthesis Gas over Ni/La2O3 and Conventional Nickel-Based Catalysts , 1996 .

[18]  D. Tichit,et al.  Comparative behaviour of extremely dispersed Pt/Mg(Al)O and Pt/Al2O3 for the chemisorption of hydrogen, CO and CO2 , 1996 .

[19]  A. York,et al.  A Sustainable Catalyst for the Partial Oxidation of Methane to Syngas: Ni/Ca1‐xSrxTiO3, Prepared In Situ from Perovskite Precursors , 1996 .

[20]  A. Vaccari,et al.  Hydrogenation of acetonitrile on nickel-based catalysts prepared from hydrotalcite-like precursors , 1997 .

[21]  F. Basile,et al.  Ni/Mg/Al anionic clay derived catalysts for the catalytic partial oxidation of methane : Residence time dependence of the reactivity features , 1998 .

[22]  M. Kumagai,et al.  Methanol decomposition to synthesis gas over supported Pd catalysts prepared from synthetic anionic clays , 1999 .

[23]  E. Tanabe,et al.  Methanol decomposition to synthesis gas over supported Pd catalysts prepared from synthetic anionic clays , 1999 .