Overview no. 55 Wear-Mechanism maps

[1]  D. Rigney,et al.  Prediction of debris flake thickness , 1985 .

[2]  The Oxidational Wear of High-Chromium Ferritic Steel on Austenitic Stainless Steel , 1985 .

[3]  Ward O. Winer,et al.  The thermal aspects of oxidational wear , 1985 .

[4]  A. R. Rosenfield,et al.  Wear processes in sliding systems , 1984 .

[5]  J. Barber,et al.  The Division of Frictional Heat—A Guide to the Nature of Sliding Contact , 1984 .

[6]  J. Sullivan,et al.  Origins and development of oxidational wear at low ambient temperatures , 1984 .

[7]  J. Halling.  Toward a Mechanical Wear Equation , 1983 .

[8]  Z. Eliezer,et al.  Residual stresses and sliding wear , 1983 .

[9]  F. F. Ling,et al.  Dynamic Wear Tests in the SEM , 1983 .

[10]  M. Ashby,et al.  Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics , 1982 .

[11]  W. Glaeser.  Wear experiments in the scanning electron microscope , 1981 .

[12]  A. Rosenfield.  Elastic-plastic fracture mechanics and wear , 1981 .

[13]  N. Suh,et al.  The genesis of friction , 1981 .

[14]  J. Sullivan,et al.  Application of the oxidational theory of mild wear to the sliding wear of low alloy steel , 1980 .

[15]  A. R. Rosenfield,et al.  A fracture mechanics approach to wear , 1980 .

[16]  S. Bhattacharyya.  Wear and friction in steel, aluminum and magnesium alloys I. Pearlitic and spheroidized steels , 1980 .

[17]  Frictional heating and the oxidational theory of wear , 1980 .

[18]  Geometrically self-similar deformations of a plastic wedge under combined shear and compression loading by a rough flat die , 1980 .

[19]  F. J. Carignan,et al.  Friction and Wear at High Sliding Speeds , 1980 .

[20]  A. Sarkar.  Friction and wear , 1980 .

[21]  E. Takeuchi,et al.  Sliding wear characteristics of gas boronized steel , 1979 .

[22]  D. A. Hills,et al.  On the application of fracture mechanics to wear , 1979 .

[23]  D. Rigney,et al.  Plastic deformation and sliding friction of metals , 1979 .

[24]  N. Soda,et al.  Mechanism of Lubrication by Surrounding Gas Molecules in Adhesive Wear , 1978 .

[25]  Eugene F. Finkin.  An explanation of the wear of metals , 1978 .

[26]  D. Rigney,et al.  The significance of near surface microstructure in the wear process , 1978 .

[27]  T. Quinn.  The Division of Heat and Surface Temperatures at Sliding Steel Interfaces and Their Relation to Oxidational Wear , 1978 .

[28]  The influence of specimen geometry and sliding mode on the friction and wear of iron-chromium alloys in controlled environments , 1977 .

[29]  N. Suh,et al.  Mechanics of subsurface void nucleation in delamination wear , 1977 .

[30]  A. M. Eleiche,et al.  Wear of metals at high sliding speeds , 1977 .

[31]  N. Suh,et al.  The stacking fault energy and delamination wear of single-phase f.c.c. metals , 1977 .

[32]  H. Uetz,et al.  Investigations of the effect of surface temperatures in sliding contact , 1977 .

[33]  R. Bill,et al.  Recrystallization as a controlling process in the wear of some f.c.c. metals , 1977 .

[34]  V. K. Srivastava,et al.  The activation energy of oxidation in wear , 1977 .

[35]  D. Rigney,et al.  Crystal plasticity and the delamination theory of wear , 1976 .

[36]  Robert S. Montgomery.  Surface Melting of Rotating Bands , 1976 .

[37]  R. Montgomery.  Friction and wear at high sliding speeds , 1976 .

[38]  William R. D. Wilson.  Lubrication by a Melting Solid , 1976 .

[39]  T. Eyre.  Effect of boronising on friction and wear of ferrous metals , 1975 .

[40]  N. Suh,et al.  The delamination theory of wear and the wear of a composite surface , 1975 .

[41]  K. Ludema,et al.  A rheological mechanism of penetrative wear , 1974 .

[42]  N. Suh,et al.  Further Investigation of the Delamination Theory of Wear , 1974 .

[43]  S. Jahanmir,et al.  Microscopic observations of the wear sheet formation by delamination , 1974 .

[44]  F. Mandl.  American Institute of Physics Handbook 3rd edn , 1973 .

[45]  R. C. Weast.  CRC Handbook of Chemistry and Physics , 1973 .

[46]  N. Suh,et al.  The delamination theory of wear , 1973 .

[47]  C. Hogarth,et al.  Transitions in the Friction Coefficients, the Wear Rates, and the Compositions of the Wear Debris Produced in the Unlubricated Sliding of Chromium Steels , 1973 .

[48]  L. Rozeanu.  A Model for Seizure , 1973 .

[49]  S. Earles,et al.  Wear characteristics of some metals in relation to surface temperature , 1972 .

[50]  S. Earles,et al.  An Assessment of Surface Temperature Predictions in the High Speed Sliding of Unlubricated SAE 1113 Steel Surfaces , 1972 .

[51]  S. Earles,et al.  A simplified theory for the oxidative wear of steels , 1971 .

[52]  J. Mo,et al.  Thermal Conductivity of Magnetite and Hematite , 1971 .

[53]  S. W. E. Earles,et al.  A Comparison of Surface Temperature Theories and Experimental Resultsfor High Speed Dry Sliding , 1971 .

[54]  R. Ward.  A comparison of reciprocating and continuous sliding wear , 1970 .

[55]  T. Eyre,et al.  The relationship between load and sliding distance in the initiation of mild wear in steels , 1970 .

[56]  James Barber,et al.  The conduction of heat from sliding solids , 1970 .

[57]  F. F. Ling.  On Temperature Transients at Sliding Interface , 1969 .

[58]  Y. Mizutani,et al.  Structural change of the surface layer of low carbon steels due to abrading , 1969 .

[59]  K. Johnson,et al.  Deformation of a plastic wedge by a rigid flat die under the action of a tangential force , 1968 .

[60]  S. W. E. Earles,et al.  Wear of Unlubricated Steel Surfaces in Sliding Contact , 1968 .

[61]  S. W. E. Earles,et al.  Surface Temperature and Its Relation to Periodic Changes in Sliding Conditions between Unlubricated Steel Surfaces , 1968 .

[62]  J. Barber,et al.  Distribution of Heat between Sliding Surfaces , 1967 .

[63]  T. Quinn,et al.  The Effect of “Hot-Spot” Temperatures on the Unlubricated Wear of Steel , 1967 .

[64]  J. A. Greenwood.  The Area of Contact Between Rough Surfaces and Flats , 1967 .

[65]  E. Rabinowicz,et al.  Friction and Wear of Materials , 1966 .

[66]  F. F. Ling,et al.  Surface Temperature with Temperature-Dependent Thermal Properties , 1966 .

[67]  N. Welsh.  The dry wear of steels II. Interpretation and special features , 1965, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[68]  N. Welsh.  The dry wear of steels I. The general pattern of behaviour , 1965, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[69]  Morton Antler,et al.  Processes of metal transfer and wear , 1964 .

[70]  F. P. Bowden,et al.  The Friction and Lubrication of Solids , 1964 .

[71]  F. F. Ling,et al.  Probable interface temperatures of solids in sliding contact , 1964 .

[72]  L. Rozeanu.  Fatigue wear as a rate process , 1963 .

[73]  D. Buckley,et al.  Friction, Wear, and Evaporation Rates of Various Materials in Vacuum to 10(exp -7) mm Hg , 1962 .

[74]  T. Quinn.  Role of oxidation in the mild wear of steel , 1962 .

[75]  A. Semenov.  The phenomenon of seizure and its investigation , 1961 .

[76]  N. B. Demkin,et al.  Contact area of rough surfaces , 1960 .

[77]  J. F. Archard,et al.  The temperature of rubbing surfaces , 1959 .

[78]  F. F. Ling.  A quasi-iterative method for computing interface temperature distributions , 1959 .

[79]  T. Tsukizoe,et al.  On the mechanism of wear between metal surfaces , 1958 .

[80]  N. Welsh,et al.  Frictional Heating and Its Influence on the Wear of Steel , 1957 .

[81]  M. Cocks.  Role of Atmospheric Oxidation in High Speed Sliding Phenomena , 1957 .

[82]  J. Archard.  Contact and Rubbing of Flat Surfaces , 1953 .

[83]  O. Kubaschewski,et al.  Oxidation of metals and alloys , 1953 .

[84]  I. Feng,et al.  Metal Transfer and Wear , 1952 .

[85]  J. C. Jaeger,et al.  Conduction of Heat in Solids , 1952 .