3D printing with particles as feedstock materials

Abstract 3D printing has been applied in numerous research fields ranging from biomedical, mechanical engineering and chemistry to material science. 3D printing applications have driven innovations in particle technology, especially through tackling particle-related issues arising from the development of particle-based printing feedstocks across such application areas. Therefore, in this review, established 3D printing processes are described to include their prototyping mechanisms, advantages and limitations. Various particulate systems, including dry and wet systems, as printing feedstock materials are introduced. The main motivation for this paper is to outline the current state of particulate feedstock systems and to attempt to outline future directions for enhancing these particle applications. This paper would be valuable for individuals, researchers and companies who need adequate and comparative information regarding the state of particle applications in the AM industry.

[1]  Nicolas Vandewalle,et al.  Measuring the flowing properties of powders and grains , 2012 .

[2]  M. Grujicic,et al.  Computer simulations of the evolution of solidification microstructure in the LENS™ rapid fabrication process , 2001 .

[3]  Thomas J. Wallin,et al.  Highly Elastic, Transparent, and Conductive 3D‐Printed Ionic Composite Hydrogels , 2017 .

[4]  L. Love,et al.  Highly oriented carbon fiber–polymer composites via additive manufacturing , 2014 .

[5]  A. Pegoretti,et al.  Polyvinyl alcohol reinforced with crystalline nanocellulose for 3D printing application , 2018, Materials Today Communications.

[6]  Chee Kai Chua,et al.  A study of the state-of-the-art rapid prototyping technologies , 1998 .

[8]  John Evans,et al.  Formulation and multilayer jet printing of ceramic inks , 2004 .

[9]  Y. Bao,et al.  The influence of nanostructure on the mechanical properties of 3D printed polylactide/nanoclay composites , 2018, Composites Part B: Engineering.

[10]  Zhiguo Wang,et al.  Preparation of 3D printable micro/nanocellulose-polylactic acid (MNC/PLA) composite wire rods with high MNC constitution , 2017 .

[11]  Alexander M. Rausch,et al.  Predictive simulation of process windows for powder bed fusion additive manufacturing: Influence of the powder size distribution , 2019, Comput. Math. Appl..

[12]  Frank W. Liou,et al.  A Review of Layer Based Manufacturing Processes for Metals , 2006 .

[13]  J. Russias,et al.  Fabrication and in vitro characterization of three-dimensional organic/inorganic scaffolds by robocasting. , 2007, Journal of biomedical materials research. Part A.

[14]  Qifa Zhou,et al.  Biomimetic Anisotropic Reinforcement Architectures by Electrically Assisted Nanocomposite 3D Printing , 2017, Advanced materials.

[15]  Michael J. Cima,et al.  Microstructural Elements of Components Derived from 3D Printing , 1992 .

[16]  A. Studart,et al.  Multimaterial magnetically assisted 3D printing of composite materials , 2015, Nature Communications.

[17]  H. Asgari,et al.  On microstructure and mechanical properties of additively manufactured AlSi10Mg_200C using recycled powder , 2017 .

[18]  Wim E Hennink,et al.  25th Anniversary Article: Engineering Hydrogels for Biofabrication , 2013, Advanced materials.

[19]  J. E. Fromm,et al.  Numerical calculation of the fluid dynamics of drop-on-demand jets , 1984 .

[20]  Inkyu Park,et al.  Sensors and Actuators A: Physical , 2017 .

[21]  Syed H. Masood,et al.  Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling , 2011 .

[22]  Xungai Wang,et al.  Silk particles, microfibres and nanofibres: A comparative study of their functions in 3D printing hydrogel scaffolds. , 2019, Materials science & engineering. C, Materials for biological applications.

[23]  Scott A. Wilson,et al.  Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting. , 2017, ACS applied materials & interfaces.

[24]  Wei Jiang,et al.  3D Printable Graphene Composite , 2015, Scientific Reports.

[25]  P. Jain,et al.  3D printed polymer dielectric substrates with enhanced permittivity by nanoclay inclusion , 2017 .

[26]  Jyoti Mazumder,et al.  Direct metal deposition , 2009 .

[27]  Andrew J. Pinkerton,et al.  Combining wire and coaxial powder feeding in laser direct metal deposition for rapid prototyping , 2006 .

[28]  Ming Jen Tan,et al.  Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing , 2018, Ceramics International.

[29]  Christopher B. Williams,et al.  Comparison of Linear and 4-Arm Star Poly(vinyl pyrrolidone) for Aqueous Binder Jetting Additive Manufacturing of Personalized Dosage Tablets. , 2019, ACS applied materials & interfaces.

[30]  Emanuel M. Sachs,et al.  Ink-jet printing of binders for ceramic components , 2004 .

[31]  Abdul W. Basit,et al.  Stereolithography (SLA) 3D printing of an antihypertensive polyprintlet: Case study of an unexpected photopolymer-drug reaction , 2020 .

[32]  Harwinder Singh,et al.  Comparison of tribological behaviour for Nylon6-Al-Al2O3 and ABS parts fabricated by fused deposition modelling , 2015 .

[33]  Murat Guvendiren,et al.  Shear-thinning hydrogels for biomedical applications , 2012 .

[34]  Amit Bandyopadhyay,et al.  Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling , 2003 .

[35]  Yusheng Shi,et al.  Selective laser melting of reduced graphene oxide/S136 metal matrix composites with tailored microstructures and mechanical properties , 2019, Materials & Design.

[36]  Yan Zhang,et al.  3D Printed Graphene Based Energy Storage Devices , 2017, Scientific Reports.

[37]  Nam Soo Kim,et al.  Thermo-mechanical Characterization of Metal/Polymer Composite Filaments and Printing Parameter Study for Fused Deposition Modeling in the 3D Printing Process , 2015, Journal of Electronic Materials.

[38]  Ricky D. Wildman,et al.  3D printing of tablets using inkjet with UV photoinitiation. , 2017, International journal of pharmaceutics.

[39]  Fan Zhang,et al.  Reactive material jetting of polyimide insulators for complex circuit board design , 2019, Additive Manufacturing.

[40]  Brian Derby,et al.  Additive Manufacture of Ceramics Components by Inkjet Printing , 2015 .

[41]  M. D. Monzón,et al.  Standardization in additive manufacturing: activities carried out by international organizations and projects , 2015 .

[42]  Chee Meng Benjamin Ho,et al.  3D Printed Polycaprolactone Carbon Nanotube Composite Scaffolds for Cardiac Tissue Engineering. , 2017, Macromolecular bioscience.

[43]  Ryan R. Dehoff,et al.  Recyclability Study on Inconel 718 and Ti-6Al-4V Powders for Use in Electron Beam Melting , 2016, Metallurgical and Materials Transactions B.

[44]  Cory M. Simon,et al.  Correction: Corrigendum: Kinetically tuned dimensional augmentation as a versatile synthetic route towards robust metal–organic frameworks , 2015, Nature Communications.

[45]  Mohsen A. Jafari,et al.  Processing of advanced electroceramic components by fused deposition technique , 2001 .

[46]  P. Gatenholm,et al.  3D Bioprinting of Human Chondrocyte-laden Nanocellulose Hydrogels for Patient-specific Auricular Cartilage Regeneration , 2016 .

[47]  A. Rubenchik,et al.  Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones , 2015, 1512.02593.

[48]  Houjun Sun,et al.  Additive manufacturing of carbon nanotube-photopolymer composite radar absorbing materials , 2018 .

[49]  T. Pollock,et al.  3D printing of high-strength aluminium alloys , 2017, Nature.

[50]  Michael C. McAlpine,et al.  3D Printed Stretchable Tactile Sensors , 2017, Advanced materials.

[51]  Kah Fai Leong,et al.  3D printing trends in building and construction industry: a review , 2017 .

[52]  P. Gatenholm,et al.  Alginate Sulfate–Nanocellulose Bioinks for Cartilage Bioprinting Applications , 2016, Annals of Biomedical Engineering.

[53]  Ruth D. Goodridge,et al.  Powder bed fusion of polymers , 2017 .

[54]  B. Tay,et al.  Investigation of some phenomena occurring during continuous ink-jet printing of ceramics , 2001 .

[55]  Randall M. Erb,et al.  Designing bioinspired composite reinforcement architectures via 3D magnetic printing , 2015, Nature Communications.

[56]  J. A. Romero,et al.  Using the laser engineered net shaping (LENS) process to produce complex components from a CAD solid model , 1997, Photonics West.

[57]  W. Cong,et al.  Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling , 2015 .

[58]  Jacob J. Adams,et al.  Microwave dielectric properties of zirconia fabricated using NanoParticle Jetting™ , 2019, Additive Manufacturing.

[59]  Nikola A. Dudukovic,et al.  Colloidal Materials for 3D Printing. , 2019, Annual review of chemical and biomolecular engineering.

[60]  Xingyou Ye,et al.  Hydroxypropyl methylcellulose-based controlled release dosage by melt extrusion and 3D printing: Structure and drug release correlation. , 2017, Carbohydrate polymers.

[61]  James E. Fay,et al.  Electrophotographic printing of part and binder powders , 2004 .

[62]  Ma Qian,et al.  Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting , 2015 .

[63]  J. Eckert,et al.  Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting—Selection Guidelines , 2017, Materials.

[64]  R. Poprawe,et al.  Influence of additive multilayer feature on thermodynamics, stress and microstructure development during laser 3D printing of aluminum-based material. , 2017, Science bulletin.

[65]  Dermot Brabazon,et al.  Recyclability of stainless steel (316 L) powder within the additive manufacturing process , 2019 .

[66]  R. Wildman,et al.  Design of highly stabilized nanocomposite inks based on biodegradable polymer-matrix and gold nanoparticles for Inkjet Printing , 2019, Scientific Reports.

[67]  Yang Ju,et al.  State-of-the-art of 3D printing technology of cementitious material—An emerging technique for construction , 2017, Science China Technological Sciences.

[68]  Wei Zhu,et al.  3D optical printing of piezoelectric nanoparticle-polymer composite materials. , 2014, ACS nano.

[69]  Remy Fabbro,et al.  Experimental analysis of spatter generation and melt-pool behavior during the powder bed laser beam melting process , 2018 .

[70]  Gideon Levy,et al.  Designing material properties locally with additive manufacturing technology SLM , 2012 .

[71]  J. Lewis,et al.  Direct-write assembly of ceramics from colloidal inks , 2002 .

[72]  Christopher B. Williams,et al.  An exploration of binder jetting of copper , 2015 .

[73]  Joseph Cesarano,et al.  Colloidal inks for directed assembly of 3-D periodic structures , 2002 .

[74]  A. Astarita,et al.  Influence of Powder Characteristics on Formation of Porosity in Additive Manufacturing of Ti-6Al-4V Components , 2017, Journal of Materials Engineering and Performance.

[75]  Alexandra M. Golobic,et al.  Highly compressible 3D periodic graphene aerogel microlattices , 2015, Nature Communications.

[76]  Brian Derby,et al.  Ink Jet Deposition of Ceramic Suspensions: Modeling and Experiments of Droplet Formation , 2000 .

[77]  Xin Wang,et al.  3D printing of polymer matrix composites: A review and prospective , 2017 .

[78]  Marinella Levi,et al.  Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling , 2015 .

[79]  Pshtiwan Shakor,et al.  Dimensional accuracy, flowability, wettability, and porosity in inkjet 3DP for gypsum and cement mortar materials , 2020 .

[80]  Nicholas Dunne,et al.  Printability of calcium phosphate: calcium sulfate powders for the application of tissue engineered bone scaffolds using the 3D printing technique. , 2014, Materials science & engineering. C, Materials for biological applications.

[81]  Weibiao Zhou,et al.  An Overview of 3D Printing Technologies for Food Fabrication , 2015, Food and Bioprocess Technology.

[82]  Chee Kai Chua,et al.  Fundamentals and applications of 3D printing for novel materials , 2017 .

[83]  Jun Zhang,et al.  3D Printing of Silk Particle-Reinforced Chitosan Hydrogel Structures and Their Properties. , 2018, ACS biomaterials science & engineering.

[84]  C. Yan,et al.  Investigation into the processability, recyclability and crystalline structure of selective laser sintered Polyamide 6 in comparison with Polyamide 12 , 2018 .

[85]  Ian Gibson,et al.  Additive manufacturing technologies : 3D printing, rapid prototyping, and direct digital manufacturing , 2015 .

[86]  L. Love,et al.  The importance of carbon fiber to polymer additive manufacturing , 2014 .

[87]  Emanuel M. Sachs,et al.  Three Dimensional Printing: Rapid Tooling and Prototypes Directly from CAD Representation , 1990 .

[88]  M. Alexander,et al.  Desktop 3D printing of controlled release pharmaceutical bilayer tablets. , 2014, International journal of pharmaceutics.

[89]  Lixin Wu,et al.  Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing , 2016 .

[90]  Tobias Schmidt,et al.  Development of a generalized parameter window for cold spray deposition , 2006 .

[91]  Tian Li,et al.  Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries , 2016, Advanced materials.

[92]  Barry Berman,et al.  3D printing: the new industrial revolution , 2012, IEEE Engineering Management Review.

[93]  K. Leong,et al.  The design of scaffolds for use in tissue engineering. Part I. Traditional factors. , 2001, Tissue engineering.

[94]  Pamela Robles Martinez,et al.  Influence of Geometry on the Drug Release Profiles of Stereolithographic (SLA) 3D-Printed Tablets , 2018, AAPS PharmSciTech.

[95]  Nick Tepylo,et al.  Laser‐Based Additive Manufacturing Technologies for Aerospace Applications , 2019, Advanced Engineering Materials.

[96]  Wei Shen,et al.  Drop penetration time in heterogeneous powder beds , 2009 .

[97]  Christopher B. Williams,et al.  Additive manufacturing (AM) and nanotechnology: promises and challenges , 2013 .

[98]  Si Qin,et al.  Development of Graphene Oxide/Polyaniline Inks for High Performance Flexible Microsupercapacitors via Extrusion Printing , 2018 .

[99]  Brian Derby,et al.  Inkjet printing ceramics: from drops to solid , 2011 .

[100]  Tang Yiping,et al.  Nano‐TiO2‐modified photosensitive resin for RP , 2011 .

[101]  I. Krieger,et al.  Rheological studies on sterically stabilized model dispersions of uniform colloidal spheres: II. Steady-shear viscosity , 1986 .

[102]  P. Peng Diffusion-induced liquid migration during thermal stabilization in presence of temperature gradients with different directions , 2020 .

[103]  Jill Z. Manapat,et al.  High-Strength Stereolithographic 3D Printed Nanocomposites: Graphene Oxide Metastability. , 2017, ACS applied materials & interfaces.

[104]  J. Litster,et al.  Drop penetration into porous powder beds. , 2002, Journal of colloid and interface science.

[105]  Hon Fai Chan,et al.  3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures , 2015, Advanced materials.

[106]  Yaoyao Fiona Zhao,et al.  Energy and Material Flow Analysis of Binder-jetting Additive Manufacturing Processes , 2014 .

[107]  N. Cappetti,et al.  3D Printing of PLA/clay Nanocomposites: Influence of Printing Temperature on Printed Samples Properties , 2018, Materials.

[108]  Terry Wohlers,et al.  Wohlers report 2016 , 2016 .

[109]  Brett Paull,et al.  A 3D printable diamond polymer composite: a novel material for fabrication of low cost thermally conducting devices , 2016 .

[110]  S. A. Farzadfar,et al.  Impact of IN718 bimodal powder size distribution on the performance and productivity of laser powder bed fusion additive manufacturing process , 2020 .

[111]  André R. Studart,et al.  Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures , 2017 .

[112]  J. Planell,et al.  High-resolution PLA-based composite scaffolds via 3-D printing technology. , 2013, Acta biomaterialia.

[113]  A. De,et al.  Estimation of Melt Pool Dimensions, Thermal Cycle, and Hardness Distribution in the Laser-Engineered Net Shaping Process of Austenitic Stainless Steel , 2011 .

[114]  David W. Rosen,et al.  Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .

[115]  John R. Tumbleston,et al.  Continuous liquid interface production of 3D objects , 2015, Science.

[116]  E. Cranston,et al.  Injectable polysaccharide hydrogels reinforced with cellulose nanocrystals: morphology, rheology, degradation, and cytotoxicity. , 2013, Biomacromolecules.

[117]  David R. Smith,et al.  Metamaterials and Negative Refractive Index , 2004, Science.

[118]  Clément Gosselin,et al.  Large-scale 3D printing of ultra-high performance concrete – a new processing route for architects and builders , 2016 .

[119]  Wei Zhu,et al.  3D‐Printed Artificial Microfish , 2015, Advanced materials.

[120]  B. Derby Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution , 2010 .

[121]  J. Lewis,et al.  3D‐Printing of Lightweight Cellular Composites , 2014, Advanced materials.

[122]  Bethany C Gross,et al.  Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. , 2014, Analytical chemistry.

[123]  Siew Ting Melissa Tan,et al.  Electrically conductive filament for 3D-printed circuits and sensors , 2017 .

[124]  Clive J Roberts,et al.  3D extrusion printing of high drug loading immediate release paracetamol tablets. , 2018, International journal of pharmaceutics.

[125]  Xibing Gong,et al.  Review on powder-based electron beam additive manufacturing technology , 2012 .

[126]  W. Zhong,et al.  Short fiber reinforced composites for fused deposition modeling , 2001 .

[127]  Zengxi Pan,et al.  Wire-feed additive manufacturing of metal components: technologies, developments and future interests , 2015 .

[128]  F. Castles,et al.  Microwave dielectric characterisation of 3D-printed BaTiO3/ABS polymer composites , 2016, Scientific Reports.

[129]  Bin Li,et al.  3D Printing Sulfur Copolymer‐Graphene Architectures for Li‐S Batteries , 2018 .

[130]  Gi-Hun Shin,et al.  Thermo-mechanical improvement of Inconel 718 using ex situ boron nitride-reinforced composites processed by laser powder bed fusion , 2017, Scientific Reports.

[131]  David W. Rosen,et al.  Design for Additive Manufacturing , 2015, Additive Manufacturing Technologies.

[132]  Jiang Chang,et al.  Mesoporous bioactive glass nanolayer-functionalized 3D-printed scaffolds for accelerating osteogenesis and angiogenesis. , 2015, Nanoscale.

[133]  Valmik Bhavar,et al.  A review on powder bed fusion technology of metal additive manufacturing , 2017 .

[134]  Christopher B. Williams,et al.  Effect of Particle Size Distribution on Powder Packing and Sintering in Binder Jetting Additive Manufacturing of Metals , 2017 .

[135]  Yirong Lin,et al.  Fabrication and characterization of 3D printed BaTiO3/PVDF nanocomposites , 2018 .

[136]  Fan Yang,et al.  Applications of excipients in the field of 3D printed pharmaceuticals , 2019, Drug development and industrial pharmacy.

[137]  M. Alexander,et al.  3D printing of tablets containing multiple drugs with defined release profiles. , 2015, International journal of pharmaceutics.

[138]  Jinbao Guo,et al.  Fabrication of highly conductive graphene flexible circuits by 3D printing , 2016 .

[139]  S. Milz,et al.  Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing , 2005, Journal of materials science. Materials in medicine.

[140]  Lin Li,et al.  Modelling powder concentration distribution from a coaxial deposition nozzle for laser-based rapid tooling , 2004 .

[141]  P. Alvarez,et al.  Effect of IN718 Recycled Powder Reuse on Properties of Parts Manufactured by Means of Selective Laser Melting , 2014 .

[142]  Frank Sonntag,et al.  Fabrication of porous scaffolds by three‐dimensional plotting of a pasty calcium phosphate bone cement under mild conditions , 2014, Journal of tissue engineering and regenerative medicine.

[143]  Xuanhe Zhao,et al.  Multi-scale multi-mechanism design of tough hydrogels: building dissipation into stretchy networks. , 2014, Soft matter.

[144]  Nicolas Perry,et al.  Energy consumption model of Binder-jetting additive manufacturing processes , 2015 .

[145]  P. Gatenholm,et al.  3D Bioprinting Human Chondrocytes with Nanocellulose-Alginate Bioink for Cartilage Tissue Engineering Applications. , 2015, Biomacromolecules.

[146]  Daniel Therriault,et al.  One-Step Solvent Evaporation-Assisted 3D Printing of Piezoelectric PVDF Nanocomposite Structures. , 2017, ACS applied materials & interfaces.

[147]  Chandrika Kamath,et al.  Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing , 2014 .

[148]  Eon Ju Lee,et al.  Synthesis and characterization of copper ink and direct printing of copper patterns by inkjet printing for electronic devices , 2020 .

[149]  Dichen Li,et al.  Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites , 2016 .

[150]  Andrew V. Healy,et al.  Additive Manufacturing of Personalized Pharmaceutical Dosage Forms via Stereolithography , 2019, Pharmaceutics.

[151]  M. Cengiz Altan,et al.  3D Printing of Highly Stretchable Strain Sensors Based on Carbon Nanotube Nanocomposites , 2018, Advanced Engineering Materials.

[152]  Abdul W. Basit,et al.  3D printing of drug‐loaded gyroid lattices using selective laser sintering , 2018, International journal of pharmaceutics.

[153]  Thierry Chartier,et al.  3D fine scale ceramic components formed by ink-jet prototyping process , 2005 .

[154]  Mark A. Ganter,et al.  A review of process development steps for new material systems in three dimensional printing (3DP) , 2008 .

[155]  Richard A. Buswell,et al.  3D printing using concrete extrusion: A roadmap for research , 2018, Cement and Concrete Research.

[156]  Yunqing Kang,et al.  Geometrical versus Random β-TCP Scaffolds: Exploring the Effects on Schwann Cell Growth and Behavior , 2015, PloS one.

[157]  M Bohner,et al.  Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing. , 2011, Acta biomaterialia.

[158]  U. Schubert,et al.  Inkjet Printing of Polymers: State of the Art and Future Developments , 2004 .

[159]  Yijun Li,et al.  The selective laser sintering of a polyamide 11/BaTiO3/graphene ternary piezoelectric nanocomposite , 2020, RSC advances.

[160]  Jason A Inzana,et al.  3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery , 2016, Annals of Biomedical Engineering.

[161]  Olaf Diegel,et al.  Wohlers Report 2018: 3D printing and additive manufacturing state of the industry: Annual Worldwide Progress Report , 2017 .

[162]  H. Friedrich,et al.  3D printing of CNT- and graphene-based conductive polymer nanocomposites by fused deposition modeling , 2017 .

[163]  M. Khan,et al.  A new chapter in pharmaceutical manufacturing: 3D‐printed drug products☆, ☆☆ , 2017, Advanced drug delivery reviews.

[164]  Lindsay S. Wray,et al.  Lyophilized Silk Sponges: A Versatile Biomaterial Platform for Soft Tissue Engineering , 2015, ACS biomaterials science & engineering.