Loss analysis and interference effect in semiconductor integrated waveguide turning mirrors

Semiconductor integrated waveguide turning mirrors (IWTM) are investigated using the beam propagation method. A mirror is fabricated and modeled along with realistic geometries in the presence of offset and roughness of the mirror surface. An interference effect between waves reflected at different surfaces in the device is evidenced, that has strong impact on the device performance in the case of weakly-confining structures. A widely-accepted fabrication approach is criticized in view of this effect. A solution is outlined that minimizes the losses due to either technological limitations or interference.

[1]  N. Dagli,et al.  Analysis of integrated optical corner reflectors using a finite-difference beam propagation method , 1991, IEEE Photonics Technology Letters.

[2]  John E. Johnson,et al.  GaAs/AlGaAs photonic integrated circuits fabricated using chemically assisted ion beam etching , 1990 .

[3]  G. R. Hadley,et al.  Wide-angle beam propagation using Pade approximant operators. , 1992, Optics letters.

[4]  Morio Kobayashi,et al.  Loss measurement and analysis of high-silica reflection bending optical waveguides , 1988 .

[5]  Mark S. Zediker,et al.  Self-aligned chemically assisted ion-beam-etched GaAs/(Al,Ga)As turning mirrors for photonic applications , 1990 .

[6]  P. Buchmann,et al.  GaAs single-mode rib waveguides with reactive ion-etched totally reflecting corner mirrors , 1985 .

[7]  G. Meneghini,et al.  High-resolution depth monitoring of reactive ion etching of InP/InGaAs(P) MQWs using reflectance measurements , 1996 .

[8]  Trevor M. Benson.  Etched-wall bent-guide structure for integrated optics in the III-V semiconductors , 1984 .

[9]  P. McIsaac,et al.  Reflection and transmission of a dielectric waveguide mirror , 1992 .

[10]  Kazuhiko Ogusu,et al.  Transmission characteristics of optical waveguide corners , 1985 .

[11]  Youngchul Chung,et al.  An assessment of finite difference beam propagation method , 1990 .

[12]  Youngchul Chung,et al.  Experimental and theoretical study of turning mirrors and beam splitters with optimized waveguide structures , 1995 .