<p>During the preparations for the International GNSS Service (IGS) contribution to the next reference frame, called repro3, the disclosed pre-launch chamber calibrated Galileo satellite antenna pattern were analyzed. Those tests revealed a discrepancy between the GPS and GLONASS z-component of the phase center offsets (PCO), aligned to the IGS14 scale, and the calibrated Galileo z-PCOs. In order to make the PCOs compatible to the repro3 it was decided to rely on the calibrated Galileo pattern and adjust the GPS and GLONASS PCOs accordingly. Combined with multi-GNSS receiver calibrations for all systems the repro3 might contribute to the scale determination for the next reference frame.</p><p>As the repro3 is based on GPS, GLONASS, and Galileo only those three systems have been analyzed leading to the repro3 ANTEX file, containing all used antenna pattern, which is aligned to the Galileo induced scale. In order to extend the repro3 ANTEX file with satellite calibrations for BeiDou and QZSS a dedicated reprocessing based on CODEs MGEX solution is made to assess the available PCOs for those satellites and tests their consistency with the repro3 scale. The results should allow to extend the repro3 ANTEX with the BDS and QZSS pattern for experimental purposes.</p>