Thin film transistors made of nanocrystalline silicon for CMOS on plastic

Our motivation is to realize CMOS on plastic foil. We report the development of thin film transistors (TFTs) made of nanocrystalline silicon (nc-Si:H). nc-Si:H is compatible with present a-Si:H thin film technology. Because of the structural evolution of nc-Si:H with film thickness, it requires extensive experimentation with device geometry. For comparison we fabricate TFTs in (a) conventional coplanar top-gate, top-source/drain geometry and (b) staggered top-gate, bottom source/drain geometry. A seed layer is introduced in the latter case serves to develop the crystallinity of the intrinsic channel layer. While the coplanar geometry provides the shortest carrier path in the most crystalline channel region, the inverted staggered geometry ensures that the active channel is formed in the last-to-grow nc-Si:H layer, and also avoids exposure of the channel to reactive ion etching (RIE). The highest process temperature is 150°C. Both intrinsic and doped nc-Si:H layers are grown by plasma-enhanced chemical vapor deposition with an excitation frequency of 80MHz. Present p-channel TFTs reach a hole field-effect mobility of ~ 0.2 cm2V-1s-1 in the staggered geometry, and an electron field-effect mobility of ~ 40 cm2V-1s-1 in both geometries. These results suggest that directly deposited nc-Si:H is an attractive candidate material for CMOS capable electronics on plastic substrates.

[1]  J. A. Nichols,et al.  Analog and digital circuits using organic thin-film transistors on polyester substrates , 2000, IEEE Electron Device Letters.

[2]  Bernard Drevillon,et al.  Substrate selectivity in the formation of microcrystalline silicon: Mechanisms and technological consequences , 1995 .

[3]  Takashi Noguchi,et al.  High Mobility Thin Film Transistors Fabricated on a Plastic Substrate at a Processing Temperature of 110°C , 2000 .

[4]  Paul Wickboldt,et al.  Polysilicon thin film transistors fabricated on low temperature plastic substrates , 1999 .

[5]  Sigurd Wagner,et al.  a-Si:H TFTs made on polyimide foil by PE-CVD at 150 °C , 1998 .

[6]  Tatsuya Shimoda,et al.  Surface-free technology by laser annealing (SUFTLA) and its application to poly-Si TFT-LCDs on plastic film with integrated drivers , 2002 .

[7]  Reinhard Carius,et al.  Improvement of grain size and deposition rate of microcrystalline silicon by use of very high frequency glow discharge , 1994 .

[8]  Sigurd Wagner,et al.  Effects of SiH2Cl2 on the Deposition and Properties of Amorphous and Microcrystalline Silicon Fabricated from Very High Frequency Glow Discharges , 2000 .

[9]  Sigurd Wagner,et al.  Microcrystalline silicon with high electron field-effect mobility deposited at 230°C , 2000 .

[10]  C. M. Hart,et al.  Low-cost all-polymer integrated circuits , 1998, Proceedings of the 24th European Solid-State Circuits Conference.

[11]  Sigurd Wagner,et al.  INTRINSIC MICROCRYSTALLINE SILICON BY PLASMA-ENHANCED CHEMICAL VAPOR DEPOSITION FROM DICHLOROSILANE , 1998 .

[12]  Zhenan Bao,et al.  High-performance plastic transistors fabricated by printing techniques , 1997 .

[13]  Reinhard Carius,et al.  Optical and transport studies on thin microcrystalline silicon films prepared by very high frequency glow discharge for solar cell applications , 1997 .

[14]  S. Wagner,et al.  Amorphous silicon thin-film transistors on compliant polyimide foil substrates , 1999, IEEE Electron Device Letters.

[15]  Robert W. Collins,et al.  EVOLUTIONARY PHASE DIAGRAMS FOR PLASMA-ENHANCED CHEMICAL VAPOR DEPOSITION OF SILICON THIN FILMS FROM HYDROGEN-DILUTED SILANE , 1999 .

[16]  T. W. Sigmon,et al.  Excimer laser crystallization and doping of silicon films on plastic substrates , 1997 .

[17]  Arvind Shah,et al.  Evolution of the microstructure in microcrystalline silicon prepared by very high frequency glow-discharge using hydrogen dilution , 2000 .

[18]  Shuichi Uchikoga,et al.  Low-Temperature Polycrystalline Silicon Thin-Film Transist or Technologies for System-on-Glass Displays , 2002 .