Effect of passivation on stress relaxation in electroplated copper films

The present study investigated the effect of passivation on the kinetics of interfacial mass transport by measuring stress relaxation in electroplated Cu films with four different cap layers: SiN, SiC, SiCN, and a Co metal cap. Stress curves measured under thermal cycling showed different behaviors for the unpassivated and passivated Cu films, but were essentially indifferent for the films passivated with different cap layers. On the other hand, stress relaxation measured under an isothermal condition revealed clearly the effect of passivation, indicating that interface diffusion controls the kinetics of stress relaxation. The relaxation rates in the passivated Cu films were found to decrease in the order of SiC, SiCN, SiN, and metal caps. This correlates well with previous studies on the relationship between interfacial adhesion and electromigration. A kinetic model based on coupling of interface and grain-boundary diffusion was used to deduce the interface diffusivities and the corresponding activation energies.

[1]  C.-K. Hu,et al.  Electromigration and adhesion , 2005, IEEE Transactions on Device and Materials Reliability.

[2]  Rui Huang,et al.  Isothermal stress relaxation in electroplated Cu films. II. Kinetic modeling , 2005 .

[3]  Paul S. Ho,et al.  Isothermal stress relaxation in electroplated Cu films. I. Mass transport measurements , 2005 .

[4]  P. Ho,et al.  Numerical simulations and experimental measurements of stress relaxation by interface diffusion in a patterned copper interconnect structure , 2005 .

[5]  Paul S. Ho,et al.  Effects of Passivation Layer on Stress Relaxation and Mass Transport in Electroplated Cu Films , 2004 .

[6]  P. Ho,et al.  Effects of passivation layer on stress relaxation in Cu line structures , 2003, Proceedings of the IEEE 2003 International Interconnect Technology Conference (Cat. No.03TH8695).

[7]  J. Lloyd,et al.  Relationship between interfacial adhesion and electromigration in Cu metallization , 2002, IEEE International Integrated Reliability Workshop Final Report, 2002..

[8]  Robert Rosenberg,et al.  Reduced electromigration of Cu wires by surface coating , 2002 .

[9]  Huajian Gao,et al.  Constrained diffusional creep in UHV-produced copper thin films , 2001 .

[10]  Dirk N. Weiss,et al.  In situ transmission electron microscopy study of thermal-stress-induced dislocations in a thin Cu film constrained by a Si substrate , 2001 .

[11]  Larry Zhao,et al.  Optimizing the electromigration performance of copper interconnects , 2000, International Electron Devices Meeting 2000. Technical Digest. IEDM (Cat. No.00CH37138).

[12]  Robert Rosenberg,et al.  Electromigration path in Cu thin-film lines , 1999 .

[13]  E. Arzt,et al.  Stress–temperature behavior of unpassivated thin copper films , 1999 .

[14]  Eduard Arzt,et al.  Quantitative analysis of strengthening mechanisms in thin Cu films: Effects of film thickness, grain size, and passivation , 1998 .

[15]  E. Arzt,et al.  Deformation Mechanisms in Thin Cu Films , 1998 .

[16]  C. Cabral,et al.  Effect of a surface layer on the stress relaxation of thin films , 1996 .

[17]  Richard P. Vinci,et al.  Thermal strain and stress in copper thin films , 1995 .

[18]  M. D. Thouless,et al.  Stress development and relaxation in copper films during thermal cycling , 1993 .

[19]  H. Frost.  Deformation Mechanisms in Thin Films , 1992 .

[20]  Paul A. Flinn,et al.  Measurement and interpretation of stress in copper films as a function of thermal history , 1991 .

[21]  F. G. Yost,et al.  Materials reliability issues in microelectronics , 1991 .