Unconventional Nanopatterning Techniques and Applications
暂无分享,去创建一个
[1] George M. Whitesides,et al. Micromolding in Capillaries: Applications in Materials Science , 1996 .
[2] P. Pigram,et al. Minimizing silicone transfer during micro-contact printing , 2007 .
[3] R Stanley Williams,et al. Vapor-phase self-assembled monolayer for improved mold release in nanoimprint lithography. , 2005, Langmuir : the ACS journal of surfaces and colloids.
[4] Chung-Yuen Hui,et al. Effect of stamp deformation on the quality of microcontact printing: theory and experiment. , 2004, Langmuir : the ACS journal of surfaces and colloids.
[5] D. Khang,et al. Room-temperature imprint lithography by solvent vapor treatment , 2000 .
[6] Kahp-Yang Suh,et al. Fabrication of three-dimensional microstructures by soft molding , 2001 .
[7] S. Quake,et al. Solvent-Resistant Photocurable “Liquid Teflon” for Microfluidic Device Fabrication , 2004 .
[8] G. Whitesides,et al. Solvent compatibility of poly(dimethylsiloxane)-based microfluidic devices. , 2003, Analytical chemistry.
[9] Ginger M. Denison,et al. High-resolution soft lithography: enabling materials for nanotechnologies. , 2004, Angewandte Chemie.
[10] D. Reinhoudt,et al. Ink dependence of poly(dimethylsiloxane) contamination in microcontact printing. , 2006, Langmuir : the ACS journal of surfaces and colloids.
[11] Yoshio Tanaka,et al. Imprint lithography for curved cross-sectional structure using replicated Ni mold , 2002 .
[12] A. Gaur,et al. Processing dependent behavior of soft imprint lithography on the 1-10-nm scale , 2006, IEEE Transactions on Nanotechnology.
[13] Hyun Jung Lee,et al. Rigiflex Lithography for Nanostructure Transfer , 2005 .
[14] George M. Whitesides,et al. Improved pattern transfer in soft lithography using composite stamps , 2002 .
[15] George M. Whitesides,et al. Features of gold having micrometer to centimeter dimensions can be formed through a combination of stamping with an elastomeric stamp and an alkanethiol ‘‘ink’’ followed by chemical etching , 1993 .
[16] Se-Jin Choi,et al. An ultraviolet-curable mold for sub-100-nm lithography. , 2004, Journal of the American Chemical Society.
[17] Hyewon Kang,et al. An improved method of preparing composite poly(dimethylsiloxane) moulds , 2006 .
[18] C. Vieu,et al. Poly(dimethylsiloxane) contamination in microcontact printing and its influence on patterning oligonucleotides. , 2007, Langmuir : the ACS journal of surfaces and colloids.
[19] John A. Rogers,et al. Polymer Imprint Lithography with Molecular-Scale Resolution , 2004 .
[20] Michael D. Stewart,et al. Patterning curved surfaces: Template generation by ion beam proximity lithography and relief transfer by step and flash imprint lithography , 1999 .
[21] M. J. Kim,et al. Simple “solutal” method for preparing Teflon nanostructures and molds , 2007 .
[22] Joseph M. DeSimone,et al. High-performance imprint lithography and novel metrology methods using multifunctional perfluoropolyethers , 2006, SPIE Advanced Lithography.
[23] Se-Jin Choi,et al. Unconventional Patterning with A Modulus-Tunable Mold: From Imprinting to Microcontact Printing , 2004 .
[24] J. A. van Kan,et al. Stamps for nanoimprint lithography fabricated by proton beam writing and nickel electroplating , 2006 .
[25] Heinz Schmid,et al. Siloxane Polymers for High-Resolution, High-Accuracy Soft Lithography , 2000 .
[26] K. Uhrich,et al. Oxygen plasma-treatment effects on Si transfer. , 2005, Langmuir : the ACS journal of surfaces and colloids.
[27] Helmut Schift,et al. Controlled co-evaporation of silanes for nanoimprint stamps , 2005 .
[28] Xiangjun Wang,et al. PEDOT surface energy pattern controls fluorescent polymer deposition by dewetting , 2004 .
[29] Stephen Y. Chou,et al. Imprint of sub-25 nm vias and trenches in polymers , 1995 .
[30] Olle Inganäs,et al. Surface energy modified chips for detection of conformational states and enzymatic activity in biomolecules. , 2006, Langmuir : the ACS journal of surfaces and colloids.
[31] D. Khang,et al. Room‐Temperature Imprint Lithography , 2001 .
[32] B. Kasemo,et al. Silicone Transfer during Microcontact Printing , 2003 .
[33] Chung-Yuen Hui,et al. Constraints on Microcontact Printing Imposed by Stamp Deformation , 2002 .
[34] G. Whitesides,et al. Direct measurement of interfacial interactions between semispherical lenses and flat sheets of poly(dimethylsiloxane) and their chemical derivatives , 1991 .
[35] D. Khang,et al. Sub-100 nm patterning with an amorphous fluoropolymer mold. , 2004, Langmuir : the ACS journal of surfaces and colloids.
[36] Buddy D. Ratner,et al. Solution Assembled and Microcontact Printed Monolayers of Dodecanethiol on Gold: A Multivariate Exploration of Chemistry and Contamination , 2002 .
[37] Weixing Zhou,et al. Stamp collapse in soft lithography. , 2005, Langmuir : the ACS journal of surfaces and colloids.
[38] Hyewon Kang,et al. Low-Pressure Nanoimprint Lithography , 2004 .