Validation of Diesel Fuel Spray and Mixture Formation from Nozzle Internal Flow Calculation

[1]  D. Drew.  Mathematical Modeling of Two-Phase Flow , 1983 .

[2]  C. Arcoumanis,et al.  Cavitation Initiation, Its Development and Link with Flow Turbulence in Diesel Injector Nozzles , 2002 .

[3]  Manolis Gavaises,et al.  Visualisation of cavitation in diesel engine injectors , 2001 .

[4]  J. Stegemann,et al.  A NEW MODEL FOR CAVITATION INDUCED PRIMARY BREAK-UP OF DIESEL SPRAYS , 2002 .

[5]  Eberhard von Berg,et al.  Validation of a CFD Model for Coupled Simulation of Nozzle Flow, Primary Fuel Jet Break-Up and Spray Formation , 2003 .

[6]  Christian Krüger,et al.  Analysis of Flow and Cavitation Phenomena in Diesel Injection Nozzles and Its Effects on Spray and Mixture Formation , 2003 .

[7]  Keiya Nishida,et al.  Characterization of Flows in the Sac Chamber and the Discharge Hole of a D.I. Diesel Injection Nozzle by Using a Transparent Model Nozzle , 1997 .

[8]  S. Patankar,et al.  Pressure based calculation procedure for viscous flows at all speeds in arbitrary configurations , 1988 .

[9]  Y. Sato,et al.  Liquid velocity distribution in two-phase bubble flow , 1975 .

[10]  S. Kampmann,et al.  The influence of hydro grinding at VCO nozzles on the mixture preparation in a DI diesel engine , 1996 .

[11]  C. Arcoumanis,et al.  LINKING NOZZLE FLOW WITH SPRAY CHARACTERISTICS IN A DIESEL FUEL INJECTION SYSTEM , 1998 .

[12]  Ming Chia Lai,et al.  Investigation of Diesel Spray Primary Break-up and Development for Different Nozzle Geometries , 2002 .

[13]  Raul Payri,et al.  A Numerical Study of the Influence of Diesel Nozzle Geometry on the Inner Cavitating Flow , 2002 .

[14]  M. Perić,et al.  A collocated finite volume method for predicting flows at all speeds , 1993 .

[15]  R. Reitz.  Modeling atomization processes in high-pressure vaporizing sprays , 1987 .

[16]  A. Leipertz,et al.  Investigation of the Primary Spray Breakup Close to the Nozzle of a Common - Rail High Pressure Diesel Injection System , 2000 .

[17]  Mamoru Ishii,et al.  Two-fluid model and hydrodynamic constitutive relations , 1984 .

[18]  D. Spalding,et al.  A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows , 1972 .

[19]  J. Dukowicz.  A particle-fluid numerical model for liquid sprays , 1980 .