Optimization of the strength of SOFC anode supports

Abstract During operation solid oxide fuel cells are stressed by temperature gradients and various internal and external mechanical loads, which must be withstood. This work deals with the optimization of the strength of as-sintered anode supported half-cells by imposing changes to production parameters, such as powder milling and sintering temperature. The strength was measured with the ball-on-ring method, and analyzed with a large displacement finite element model. Weibull statistics were used to describe the distribution of strengths. The influence on the Weibull strength of the many different processing parameters was found to be quantifiable in terms of cell porosity to a large extent. The results were validated with an independent set of measurements of strength and stiffness by uniaxial tension and the impulse excitation technique, respectively. For application of the finding in relation to the SOFC technology a mathematical frame to determine the optimal porosity of a SOFC system is presented.

[1]  R. M. Woolley,et al.  Symmetrical bending of thin circular elastic plates on equally spaced point supports , 1967 .

[2]  Jens Henrik Andreasen,et al.  Statistics of Brittle Failure in Multiaxial Stress States , 1993 .

[3]  B. Bollen,et al.  Impulse excitation apparatus to measure resonant frequencies, elastic moduli, and internal friction at room and high temperature , 1997 .

[4]  Mikko Pihlatie,et al.  Testing and improving the redox stability of Ni-based solid oxide fuel cells , 2009 .

[5]  H. L. Heinisch,et al.  Weakest Link Theory Reformulated for Arbitrary Fracture Criterion , 1978 .

[6]  Boris Iwanschitz,et al.  Fundamental mechanisms limiting solid oxide fuel cell durability , 2008 .

[7]  N. Ramakrishnan,et al.  Effective elastic moduli of porous solids , 1990 .

[8]  H. Frandsen,et al.  Strength of Anode‐Supported Solid Oxide Fuel Cells , 2011 .

[9]  Anthony G. Evans,et al.  Statistical Analysis of Bending Strengths for Brittle Solids: A Multiaxial Fracture Problem , 1983 .

[10]  Mogens Bjerg Mogensen,et al.  H 2 ­ H 2 O ­ Ni ­ YSZ Electrode Performance Effect of Segregation to the Interface , 2004 .

[11]  A. Atkinson,et al.  Mechanical behaviour of ceramic oxygen ion-conducting membranes , 2000 .

[12]  J. Malzbender,et al.  Fracture test of thin sheet electrolytes for solid oxide fuel cells , 2007 .

[13]  Edgar Lara-Curzio,et al.  Mechanical properties of tape cast nickel-based anode materials for solid oxide fuel cells before and after reduction in hydrogen , 2004 .

[14]  Patrick M. Kelly,et al.  Transformation Toughening in Zirconia‐Containing Ceramics , 2004 .

[15]  K. Kromp,et al.  Statistical properties of Weibull estimators , 1991 .

[16]  Jan Van herle,et al.  Design of experiment approach applied to reducing and oxidizing tolerance of anode supported solid o , 2011 .

[17]  A. Atkinson.  Mechanical Properties of Ceramic Materials for Solid Oxide Fuel Cells , 1997 .

[18]  Mogens Bjerg Mogensen,et al.  Ni/YSZ electrode degradation studied by impedance spectroscopy: Effects of gas cleaning and current density , 2010 .

[19]  Roy W. Rice,et al.  Porosity of Ceramics: Properties and Applications , 1998 .

[20]  K. Thydén,et al.  Electrochemical Characterization of Ni/(Sc)YSZ Electrodes , 2010 .

[21]  B. D. Agarwal,et al.  Analysis and Performance of Fiber Composites , 1980 .