Reduced-scale experimental investigation on ventilation performance of a local exhaust hood in an industrial plant

Abstract Local ventilation systems are widely used in industrial production processes to capture heat release and/or gaseous/particulate contaminants. The primary objective of this study was to determine important empirical factors on local pollutant capture efficiency and characteristics of thermal stratification in the working areas of industrial plants. Investigated factors were confined airflow boundaries, flow rates of the exhaust hoods, source strengths, airflow obstacles and distances between sources and exhaust hoods. Reduced-scale experiments were conducted with a geometric scale of 1:15 corresponding to a portion of the blast furnace workshop of a steel plant. The dependency of capture efficiency on Archimedes numbers was established. The results showed that confined airflow boundaries, flow rates of the exhaust hoods and source strengths were important empirical factors on pollutant capture efficiency. Hood performance was also evaluated by thermal stratification heights in the plants. This study could help improve the capture efficiency of local ventilation systems used in industrial plants. Safe operation heights are recommended in the upper space of industrial plants based on the thermal stratification in the plants.

[1]  Wolfgang Rodi,et al.  Turbulent buoyant jets and plumes , 1982 .

[2]  Ismail Celik,et al.  Flow Dynamics and Contaminant Transport in Industrial-Type Enclosing Exhaust Hoods , 2013, Journal of occupational and environmental hygiene.

[3]  Andrew Persily,et al.  Reduction of exposure to ultrafine particles by kitchen exhaust hoods: the effects of exhaust flow rates, particle size, and burner position. , 2012, The Science of the total environment.

[4]  Henrik Brohus,et al.  Smoke Movement in an Atrium with a Fire with Low Rate of Heat Release , 2008 .

[5]  Experimental characterization of a plume of passive contaminant above a thermal source: capture efficiency of a fume extraction hood. , 2009, The Annals of occupational hygiene.

[6]  Peter V. Nielsen.  Model Experiments for the Determination of Airflow in Large Spaces , 1993 .

[7]  Yigang Sun,et al.  An Overview of Room Air Motion Measurement: Technology and Application , 2007 .

[8]  Bart Merci,et al.  On the extrapolation of CFD results for smoke and heat control in reduced-scale set-ups to full scale: atrium configuration , 2013 .

[9]  Andrei Dragomirescu,et al.  Modular ventilation with twin air curtains for reducing dispersed pollution , 2013 .

[10]  P. Heiselberg,et al.  The airborne transmission of infection between flats in high-rise residential buildings: Tracer gas simulation , 2007, Building and Environment.

[11]  Joseph Virgone,et al.  A comparative study of two tracer gases: SF6 and N2O , 2001 .

[12]  R. Huo,et al.  Comparison of the distribution of carbon monoxide concentration and temperature rise in channel fires: Reduced-scale experiments , 2011 .

[13]  Jung-Hua Chou,et al.  Evaluation of buoyancy-driven ventilation in atrium buildings using computational fluid dynamics and reduced-scale air model , 2009 .

[14]  H. Awbi.  Ventilation of buildings , 1873 .

[15]  Y.J.P. Lin,et al.  A study on flow stratification in a space using displacement ventilation , 2014 .

[16]  Ilpo Kulmala.  Numerical simulation of the capture efficiency of an unflanged rectangular exhaust opening in a coaxial air flow , 1995 .

[17]  Nicolas Le Roux,et al.  Reduced-scale study of wind influence on mean airflows inside buildings equipped with ventilation systems , 2012 .

[18]  John M. Kane,et al.  Design of Industrial Ventilation Systems , 1982 .

[19]  Yuguo Li,et al.  Residential Kitchen Range Hoods – Buoyancy-Capture Principle and Capture Efficiency Revisited , 1997 .

[20]  Fabrice Lemoine,et al.  Experimental study of thermal stratification in ventilated confined spaces , 2005 .

[21]  Peter V. Nielsen,et al.  Local Exhaust Ventilation: a numerical and experimental study of capture efficiency , 1994 .

[22]  A. Melikov,et al.  Determination of the integral characteristics of an asymmetrical thermal plume from air speed/velocity and temperature measurements , 2010 .

[23]  M. Pavageau,et al.  Turbulent heat and mass transfer through air curtains devices for the confinement of heat inside tunnels , 2011 .

[24]  Samir R. Traboulsi,et al.  Effects of jet inclination angle and geometrical parameters on air curtain performance , 2009 .

[25]  R. Huo,et al.  Comparative study on carbon monoxide stratification and thermal stratification in a horizontal channel fire , 2012 .

[26]  Peter V. Nielsen,et al.  Experiments on an Exhaust Hood for the Paint Industry , 1991 .