Flow transition in a multilouvered fin array

Abstract The paper describes the detailed transition mechanism from steady to unsteady flow in a multilouvered fin geometry. The initial instability appears in the wake of the exit louver at a Reynolds number of 400 with a characteristic non-dimensional frequency (based on inflow velocity and louver pitch) of 0.84. Between a Reynolds number of 700 and 800, power spectra in the interior of the array indicate an increase in energy in the vicinity of the first harmonic of the initial exit wake instability. By a Reynolds number of 900, free shear layer or Kelvin–Helmholtz type instabilities develop on the leading edge shear layers of louvers near the exit. These instabilities have a characteristic non-dimensional frequency of 1.7. As the Reynolds number increases further, instabilities move upstream into the array. By a Reynolds number of 1300, most of the louvers exhibit unsteadiness, except for the entrance louver and the first two louvers following it. By this Reynolds number, the flow in the downstream half of the array exhibits a chaotic behavior.

[1]  R. D. Jackson,et al.  Heat Transfer 1 , 1965 .

[2]  Richard E. Kronauer,et al.  The formation of vortex streets , 1962, Journal of Fluid Mechanics.

[3]  Hiroshi Aoki,et al.  Numerical Analysis on Two-Dimensional Flow and Heat Transfer of Louvered Fins Using Overlaid Grids , 1990 .

[4]  A numerical study of flow and heat transfer in compact heat exchangers , 1996 .

[5]  Sadanari Mochizuki,et al.  TRANSPORT PHENOMENA IN STACKS OF INTERRUPTED PARALLEL-PLATE SURFACES , 1987 .

[6]  A. N. Stokes,et al.  Flow-resonant sound interaction in a duct containing a plate, II: Square leading edge , 1986 .

[7]  Karen A. Thole,et al.  Experimental design for flowfield studies of louvered fins , 1998 .

[8]  K. Sasaki,et al.  Structure of a turbulent separation bubble , 1983, Journal of Fluid Mechanics.

[9]  Naim Afgan,et al.  Heat Exchangers Theory Amp Practice , 1983 .

[10]  Kyuro Sasaki,et al.  Three-Dimensional Vortex Structure in a Leading-Edge Separation Bubble at Moderate Reynolds Numbers , 1991 .

[11]  Joe F. Thompson,et al.  Numerical grid generation: Foundations and applications , 1985 .

[12]  Research on fins for air conditioning heat exchangers : 1st report, numerical analysis of heat transfer on louvered fins , 1990 .

[13]  S. Balachandar,et al.  Computations of flow and heat transfer in parallel-plate fin heat exchangers on the CM-5: effects of flow unsteadiness and three-dimensionality , 1997 .

[14]  C. J. Davenport Heat Transfer and Flow Friction Characteristics of Louvred Heat Exchanger Surfaces , 1981 .

[15]  T. A. Cowell,et al.  Heat transfer and pressure drop characteristics of flat tube and louvered plate fin surfaces , 1988 .

[16]  J. C. Lane,et al.  Leading Edge Separation From a Blunt Plate at Low Reynolds Number , 1980 .

[17]  Ralph L. Webb,et al.  How structure in the louvered fin heat exchanger geometry , 1991 .

[18]  Danesh K. Tafti,et al.  A three‐dimensional numerical study of flow separation and reattachment on a blunt plate , 1991 .

[19]  P. W. Bearman,et al.  An Investigation of the Flow around Rectangular Cylinders , 1972 .

[20]  Yasuharu Nakamura,et al.  A numerical study of vortex shedding from flat plates with square leading and trailing edges , 1992, Journal of Fluid Mechanics.

[21]  Danesh K. Tafti,et al.  A numerical study of flow separation and reattachment on a blunt plate , 1991 .

[22]  Yasuharu Nakamura,et al.  Experimental and numerical analysis of vortex shedding from elongated rectangular cylinders at low Reynolds numbers 200-103 , 1996 .

[23]  S. Balachandar,et al.  Heat transfer enhancement mechanisms in inline and staggered parallel-plate fin heat exchangers , 1997 .

[24]  N. J. Cherry,et al.  Unsteady measurements in a separated and reattaching flow , 1984, Journal of Fluid Mechanics.

[25]  Yuji Ohya,et al.  Experiments on vortex shedding from flat plates with square leading and trailing edges , 1991, Journal of Fluid Mechanics.

[26]  Danesh K. Tafti,et al.  Time-dependent calculation procedure for fully developed and developing flow and heat transfer in louvered fin geometries , 1999 .